Best Tractor Upgrade - Should come this way from the Factory
Auxbeam 5D Pro Light Bar: www.auxbeam.co...
15% OFF Code:ETT1
Auxbeam RGB Switch Panel: www.auxbeam.co...
15% OFF Code: ETT2
In this video, I'm going to show you how to add some much-needed light to your tractor for those nighttime farming sessions. Using light bars from Auxbeam, I'll be mounting a small bar on the front brush guard and two large bars on the ROPS. With this setup, I'll have two light bars facing forward and one facing the rear.
To ensure full control over the lighting system, I've also installed a switch panel to control each light individually. This allows me to turn on only the lights I need at any given time.
Throughout the video, I'll take you through the entire installation process, including how to mount the lights onto the brush guard and ROPS without drilling into the ROPS. I'll also cover how to wire the system so that all the lights work together seamlessly.
If you're looking to enhance your nighttime tractor rides, then this is the video for you. With the Auxbeam light bars and switch panel, I'm confident that you'll be more than satisfied with the results.
You can check out their website here:
www.auxbeam.com
Switch Kit:
auxbeam.com/co...
Light on the Brush Guard:
auxbeam.com/co...
Light on the ROPS:auxbeam.com/co...
Thanks for watching! If you enjoyed this video, here are a list of things I reguraly use on my channel that might also interest you!
Vehicles I Own and Work On:
2017 Ford F350 6.7 Powerstroke
1997 Ford F350 7.3 Powerstroke
2020 Subaru Forester
Equipment I Maintain and Use:
Kubota L4701
Ruggedmade 322 Log Splitter
John Deere X738
Attachments I have for my Kubota L4701:
Homestead Implements 6 ft Snow Pusher
Titan Attachments 5 ft Root Rake Grapple
Titan Attachments Pallet Forks
Titan Attachments Trailer Mover
Countyline 6 ft Rototiller
Countyline 6 ft Brush Hog
Massey 5 ft Rear Blade
Countyline MiddleBuster Plow
Countyline 6 ft Box Blade
HomeMade Rear Ballast (55 Gallon Drum of Concrete)
HomeMade 6 ft Lawn Roller
RuggedMade Log Tongs
Chainsaws I Use:
Husquvarna 455 Rancher
Stihl MS170
Holzfforma 372 XP
Homelite Super XL
Pulan 2000
Tools I Commonly Use:
Stihl Hookaroon
ESAB Migmaster 250
Partner K750 Demo Saw
BendPak 10,000 Pound 2 post Vehicle Lift
For Sponsorship, or Marketing inquires please email EverythingElliott716@gmail.com
#tractor #diy #auxbeam #equipment #tractorvideo #diy #ledlights #lightbar #offroad #tractors #kubota #farmequipment #farming #farmlife
0:00 Intro
1:00 Unboxing
5:32 Mounting the Switch Panel
7:00 Mounting the Fuse Block
11:29 Mounting the Light on the Brush Guard
12:00 Mounting the Lights on the ROPS
18:09 Wiring Everything
21:33 Testing the Lights in the Dark
27:07 Don't Forget to Subscribe!
Пікірлер: 19
If you're interested in getting these lights and saving a little money while you're doing it, I've got links and discount codes in the video description!
Those are some great lights. Easy to hook up with that fuse block and controller. Nice and bright is what you want. Great video.
@EverythingElliott
Жыл бұрын
I'm very happy with the results! The switch block is a nice touch, especially since I have a lot more spots to add other auxiliary items.
Great job. looks amazing, will send you a message. we might get a 5 inch snow storm tomorrow night into Fri.
@EverythingElliott
Жыл бұрын
Nice! Thanks for Watching!
@davidbaron6647
Жыл бұрын
@@EverythingElliott welcome
We've been getting dumped on with snow the last 2 weeks near Mt. Hood/Oregon. This is great, my Kubota L4400 is pretty close to yours and I need some lights asap!
@EverythingElliott
Жыл бұрын
The camera has a tough time showing how bright they really are! I'm super happy with them, and the switch panel being able to select which ones I want on at which time is a huge bonus!
Great video lights look good on the tractor
@EverythingElliott
Жыл бұрын
I'm very happy with the outcome! The camera doesn't do the brightness justice that's for sure!
You could've folded the ROPS down, then you wouldn't have to stand on something other than the floor to do the work. Also some blue lock tite on the bolts would help insure nothing vibrates loose. Keep the relay, it'll come in handy sometime. Out of my 5 cats none of them are as friendly as Theodore. Now you can plow at night.
@EverythingElliott
Жыл бұрын
Work harder, not smarter…I guess that’s why I didn’t fold it down. I saved all the extra wiring harness parts, I have the inability to throw anything like that out. And Theodore is exhaustingly affectionate.
I took a similar approach on my L2501 after seeing your video. The operator station fuse box cover won't fit back on after connecting the red sense wire because it sticks out over the other fuses. Did you run into this issue and what did you do to be able to get the fuse box cover to fit back on?
@EverythingElliott
8 ай бұрын
I remember it being tight, but it fit. I believe I just bent the wire down, then put the top on, and squeezed it shut, it clicked closed, and haven't had an issue since.
I'd be concerned with the splashback from the light mounted to the grill guard with implements on the loader. Had any issues with that?
@EverythingElliott
Жыл бұрын
The only one I’ve had issue with is my forks because it’s high back forks. In that situation I just turn the grill light off and use the forward mounted ROPS light
Will the fuse box ,not get to hot mounted on the front of the engine?
@EverythingElliott
Жыл бұрын
Great Question, diesels run fairly cold, and since its Infront of the radiator and fan, the fan will be pulling air past the fuse box, through the rad so it should keep the fuse box nice and cool.
@Northeast_Mainiac
8 ай бұрын
I was wondering that aswell