In this video I am drilling steel and setting up a leveling system for my new Hudson HFE 30 homesteader sawmill.
Жүктеу.....
Пікірлер: 22
@RCAFpolarexpress3 жыл бұрын
Good evening Sir, now that a major drill 💪😊👍 Ho boy that a near aircraft flying by 😮 Outstanding installation Sir 👍😊 CHeers 🍻
@Aaronzap15
3 жыл бұрын
Thanks bud! Hope all is well! Tomorrow morning will be the video of the first log I milled check it out 👍🏻🍻
@RCAFpolarexpress
3 жыл бұрын
@@Aaronzap15 I will !!! CHeers !!!
@terryatpi Жыл бұрын
Overkill. I love it. 😊
@Aaronzap15
Жыл бұрын
Probably is overkill but it turns out some true cut lumber and slabs! Thanks for watching!
@terryatpi
Жыл бұрын
@@Aaronzap15 buying a hm126 in the spring. Am shopping around for I beams myself. Thanks
@OntarioFirewoodResource3 жыл бұрын
You'll appreciate it more than a store bought machine. For those that don't have a mag drill, start witha small bit and use gradually bigger bits til you get the desired diameter hole
@Aaronzap15
3 жыл бұрын
That mag drill is an awesome tool! Made short work drilling all the holes thanks for watching
@WSTMike3 жыл бұрын
Love the drill!! I know my shop should have one! That made life much easier on you. It’s coming along well!
@Aaronzap15
3 жыл бұрын
With out the Mag drill it would have taken 2 weeks to drill 24 holes. Mag drill is a must! Those 2 drills were probably 5 grand and I thank my friend for letting me borrow them
@reesegary3 жыл бұрын
She's coming along real good. That mag drill is nice!
@Aaronzap15
3 жыл бұрын
Thanks Gary! That mag drill is definitely awesome tool. Super fast
@MySliceOfHeavenoutdoors3 жыл бұрын
going together nicely, I never even seen drills like those before.
@Aaronzap15
3 жыл бұрын
Thanks! They are awesome drills ! Expensive but a friend helped me out. Those 2 drills together are 5,000$
@BuildALotAcres3 жыл бұрын
Looking good. I'd love one of the electromagnetic drills. They can drill sideways, upside down, etc. The hollow bit design really enables fast drilling.
@Aaronzap15
3 жыл бұрын
It really is an awesome drill. And it is fast.👍🏻🍻
@OakMountainAcotts3 жыл бұрын
Can't wait to see the end result. Is this a kit build purchased online?
@Aaronzap15
3 жыл бұрын
The Hudson HFE 30 was fully built when I picked it up. The smaller models have to be assembled. I put my first log on it last Sunday and that vid will be out tomorrow. All I say it’s addicting when you make your first cut
@OGAOutdoors3 жыл бұрын
Nice work Aaron that thing should be nice when finished, I kept waiting for a finger to get mashed when you were lining up all the bolts.
@Aaronzap15
3 жыл бұрын
Ya it’s definitely heavy steel. Glad I didn’t smash my hands but if I did it would have been great content. lol thanks Ben
Пікірлер: 22
Good evening Sir, now that a major drill 💪😊👍 Ho boy that a near aircraft flying by 😮 Outstanding installation Sir 👍😊 CHeers 🍻
@Aaronzap15
3 жыл бұрын
Thanks bud! Hope all is well! Tomorrow morning will be the video of the first log I milled check it out 👍🏻🍻
@RCAFpolarexpress
3 жыл бұрын
@@Aaronzap15 I will !!! CHeers !!!
Overkill. I love it. 😊
@Aaronzap15
Жыл бұрын
Probably is overkill but it turns out some true cut lumber and slabs! Thanks for watching!
@terryatpi
Жыл бұрын
@@Aaronzap15 buying a hm126 in the spring. Am shopping around for I beams myself. Thanks
You'll appreciate it more than a store bought machine. For those that don't have a mag drill, start witha small bit and use gradually bigger bits til you get the desired diameter hole
@Aaronzap15
3 жыл бұрын
That mag drill is an awesome tool! Made short work drilling all the holes thanks for watching
Love the drill!! I know my shop should have one! That made life much easier on you. It’s coming along well!
@Aaronzap15
3 жыл бұрын
With out the Mag drill it would have taken 2 weeks to drill 24 holes. Mag drill is a must! Those 2 drills were probably 5 grand and I thank my friend for letting me borrow them
She's coming along real good. That mag drill is nice!
@Aaronzap15
3 жыл бұрын
Thanks Gary! That mag drill is definitely awesome tool. Super fast
going together nicely, I never even seen drills like those before.
@Aaronzap15
3 жыл бұрын
Thanks! They are awesome drills ! Expensive but a friend helped me out. Those 2 drills together are 5,000$
Looking good. I'd love one of the electromagnetic drills. They can drill sideways, upside down, etc. The hollow bit design really enables fast drilling.
@Aaronzap15
3 жыл бұрын
It really is an awesome drill. And it is fast.👍🏻🍻
Can't wait to see the end result. Is this a kit build purchased online?
@Aaronzap15
3 жыл бұрын
The Hudson HFE 30 was fully built when I picked it up. The smaller models have to be assembled. I put my first log on it last Sunday and that vid will be out tomorrow. All I say it’s addicting when you make your first cut
Nice work Aaron that thing should be nice when finished, I kept waiting for a finger to get mashed when you were lining up all the bolts.
@Aaronzap15
3 жыл бұрын
Ya it’s definitely heavy steel. Glad I didn’t smash my hands but if I did it would have been great content. lol thanks Ben