Single stage. Awesome. Thanks for the video.

@eastwoodco

3 ай бұрын

You're welcome.

@KrC_Games

10 күн бұрын

@@eastwoodco omg the light attachment is something else!

That paint does match the original VW paint for peel. Please do another video of an all over as a true single stage and see if you can get it to lay down better. If you can get it to lay as good as a regular single stage, I'll buy it for all over. Otherwise, it's good for matching factory peel, if it will blend. Will it blend?

@eastwoodco

23 күн бұрын

There are ways to blend a single stage in a DIY fashion - production or show car stuff you're going to want to use a base/clear for proper blends or paint entire panels. We'll have more on this line coming out soon!

I’m a newbie with paint but my car is black now can I sand down my old clear and put new clear with Pearl pigments?

@eastwoodco

Ай бұрын

If you're car is straight and all you want to do is add additional top coats you could sand with 600-800 on a DA/SCUFF and then shoot a pearl coat and re-clear.

After 3 professional $$ PPG clears gone bad in 36 months, i went to acrylic enamel on my cars and get 10 yrs service for $55 gallon bright red. Not as shiney but better than the deteriorating alternative.

@eastwoodco

3 ай бұрын

That's why we provide you with options! From single stage, base, clear, pearls, we have what you're looking for.

@sll-tt6bj

Ай бұрын

​@@eastwoodco If I wanted paint I would not depend on Eastwood

@sll-tt6bj

Ай бұрын

You can color sand and buff single stage

I, confused, why an under coat on a single stage ? Or a base clear, is it a 3 stage pearl or are you just trying to get coverage ? And hate to be a troll but base is easier in my oppinion , more coats buy you can correct the base for runs and dust before the clear and cut the mistakes in the clear after. Not always an option with single metallics

@vhehn

3 ай бұрын

Exactly right.

@eastwoodco

3 ай бұрын

The VW Paint Code is a peal or Tri-Coat, so it requires a base color Blue and then the Pearl coat. But it's the "single stage system" because no clear is needed.

How do you call this single stage? Its base coat top coat

@eastwoodco

Ай бұрын

It's a little tricky because its a peal color, but this paint job had no clear coat applied so it's "Single Stage" paint.

price is way too high. don't know what you are basing your price from? you can get it local for about half the price and it's a name brand paint like ppg. sorry guys

@eastwoodco

3 ай бұрын

Our price is for Ready To Spray Base Coat is competitive with other's in the market. We also have budget friendly options if you're doing a Full Re-Spray in the $100 range for base coat with our large library of pre-mixed colors. www.eastwood.com/eastwood-4-1-twilight-sky-pearl-basecoat-128oz.html

Sorry, that paint job is not good. Set your gun up better for virtually no orange peel. That peel is too heavy.

@mikeafa1

3 ай бұрын

Lot of cut and buff to do!

@eastwoodco

3 ай бұрын

The paint job's orange peel is right on par with the factory peel on the car - as shown at 7:17. You can always buff it up more to knock some of that down.

i dont agree. the best paint for beginners is bccc. with single stage you get 1 shot. whatever mistakes you make you live with. with bccc you split up the job and you have 3 chances to get it right. first you get the base color right. once thats done you get 2 more chances to get the clear right.

@vhehn

3 ай бұрын

@@tdc7 a beginner wants the best outcome with the least chance of a ruined job. That is bccc.

@404_profile_not_found

3 ай бұрын

@@vhehn A beginner is likely not going to want to spend 2x the cost on primer/sealer, basecoat & clearcoat, hardeners reducers and more. Especially because if they screw up bad, its much easier and more cost effective to redo primer and ready-to spray single stage. If there are any mistakes on basecoat or clearcoat, the likelihood of messing up when trying to repair those is way more likely with a beginner painter. Imagine spraying your basecoat and clear too light, then when sanding out the inevitable orange peel they burn through both. A beginner won't have the knowledge or experience to fix it properly.

@eastwoodco

3 ай бұрын

As we mention in the video the ultimate point is to give YOU options when approaching your next job. Single Stage is less steps, less material to purchase, and can still be buffed afterwards - a first time painter might find this advantageous.

@rickyhastings8872

3 ай бұрын

If it's your pride and joy you better sit down with that 7 coarse if you want it to last , unless you are a car flipper @@tdc7

@silvercommander

3 ай бұрын

SS is excellent for a beginner. It is same as spray can but obviously better.

To slow bro

@eastwoodco

8 күн бұрын

What's too slow?

You should consider taking this video down.

Why does the camera operator think this is a good time to do a showcase of his "talents" for a Hollywood career?

@eastwoodco

Ай бұрын

Do you mean interesting shot selection, movement, and depth of field? We're a professional video production studio.