I know its just a cheap Mora but idk about grinding a divot in the spine. Just use the knife to cut a notch into a stick and you can do the same thing without comprimising the tip of your knife that you seem to be building a survival kit on...

Really good. I'm an electrical contractor, so I have no shortage of electrical tape, but I watched and went to the store and bought an inner tube. Great idea. So practical. Also the way you did the cord with the plastic keeper. Very practical.

@westcoastwoodsman2289

3 жыл бұрын

Thank you. I just watched your "Another Get Home Bag, But It's My Bag" video again and it has motivated me to try and do one of my own.

Maybe put the bow drill grommet on the side thats visible when the knife is in the sheath. Cause if I'm using the knife to hold down the drill I want the knife in the sheath for safety while working the bow with my other hand.

@westcoastwoodsman2289

Жыл бұрын

That is a good idea. I flip the knife over and put it back in the sheath while trying to use the bow. Doesn't fit great but still covers the blade. To be honest I haven't had a lot of success with the bow method of fire starting. I live in a very rainy part of the world so it's pretty much a last resort.

@BretCahill

Жыл бұрын

@@westcoastwoodsman2289 I can understand that. Bow drill will always be special to me because it was the first method I was successful at when I was learning fire making techniques.

Finally found this again!!! Was absolutely positive I subscribed the first time I watched this and saved this specific video to do this later but alas the YT gods decided to make me work hard for it... Over 2 weeks to find this video again!! So happy I did (ended up watching way to many with people using electrical tape for everything ~ when electrical tape is in a vehicle wrapped around anything in an emergency bag for say 2-3 years when YOU decide it cannot wait any longer to checked because husband won't ~ and the tape has slid (melted) and left sticky residue that even the most OCD clean everything person cannot remove my search brought me to the best video ever ~ yours).

@westcoastwoodsman2289

2 жыл бұрын

Thank you for watching. I'm not a fan of electrical tape either. It makes a real mess if it gets too hot in the sun or wet in heavy rain.

RUS: Если добавлено огниво, то вместо паракорда можно использовать джутовую или пеньковую веревку 2-3 мм в диаметре, её можно использовать в качестве растопки. Еще и стоит раз в 5 дешевле, рулона хватит на много лет.

Very nice and creative mods, and you demonstrate and you explain it very clearly. Thank you!

@westcoastwoodsman2289

2 жыл бұрын

You're very welcome!

Love the trick with the bike tube. Keep the videos coming!

@westcoastwoodsman2289

4 жыл бұрын

I am glad you liked it! I will.

Particularly liked the pot lifting mod, will be copying that one thanks

@westcoastwoodsman2289

3 жыл бұрын

You're welcome! Camping season is here, I hope it comes in handy.

Nice vid really enjoyed watching your creativity 👍👍👍

Outstanding sir! Very nice but unique mods. Will be redoing mine with your method for sure. Subbed too

@westcoastwoodsman2289

2 жыл бұрын

Thanks for watching and subbing! I'm glad you like the mods.

Looks good. Thanks for showing us.

@westcoastwoodsman2289

2 жыл бұрын

No problem 👍

Very well thought out thx.

@westcoastwoodsman2289

3 жыл бұрын

Your welcome. I hope the mods come in handy.

U deserve way more subs

@westcoastwoodsman2289

3 жыл бұрын

Thank you for saying so and thank you for watching. Hopefully I can put out some more videos soon.

Hi, silly question here, but what is the pipe plug used for? I love all the other mods and will be using them on my Mora as well as my niece's. Thanks for the video!

@westcoastwoodsman2289

4 жыл бұрын

Thank you for watching. The pipe plug is used as a block for the top of the spindle in a bow drill set up. I made a short demonstration video today and posted it.

@MissB74

4 жыл бұрын

@@westcoastwoodsman2289 Thanks!

@westcoastwoodsman2289

4 жыл бұрын

@@MissB74 you're welcome :)

@samdeur

Жыл бұрын

@@westcoastwoodsman2289cool was wondering what the pipe plug was for 😊

I stole every single one of these ideas. Thanks 👍👍😆

@westcoastwoodsman2289

4 жыл бұрын

You're welcome! :)

Very cool!

@westcoastwoodsman2289

3 жыл бұрын

Thank you for watching.

Try electricians shrink tubing for the sheath. Great idea.

@westcoastwoodsman2289

Жыл бұрын

That would definitely work.

@_IDFK

Жыл бұрын

I was just thinking that! 🤓😎 Although the bike tube is also a cunning plan - new Mora owner & loving these modding ideas generally 😌

G'day, Great video mate, I will be using these mods on my mora, cheers

@westcoastwoodsman2289

4 жыл бұрын

Thanks for watching.

I had the same idea a log time ago, but I found I had to slice horizontally all the way down the tubing or the firesteel got trapped in the tube

@westcoastwoodsman2289

2 жыл бұрын

I've been able to get the fire steel out when i have needed it but it does get to be a bit of a struggle sometimes.

Great Mods !🎉 What brand of Fire Steel is that? Perfect fit. I want to get the same

@westcoastwoodsman2289

4 ай бұрын

Thanks! I'm almost certain it's a generic Coghlan 1005 fire steel. I'm in Canada, so I just get ferro rods from the dollar store or Canadian Tire. I think the fire steels are all made in the same place. They all have the same dimensions, just the names on the packaging are different.

Is that 3/8 inch inner diameter for the clear PVC tube? And what width of firesteel do you use to fit well? Thanks so much!

@westcoastwoodsman2289

2 жыл бұрын

Sry Max, I missed this question somehow. The tube is 3/8 inside diameter and th firesteel is just slightly smaller than that so I would guess 5/16th. Wish I would have caught this sooner. I hope your mods worked out anyway.

Hi, what is the purpose of the pipe plug? Push nut?

@patterguitsit7124

5 ай бұрын

Figured it out: It serves as a bearing block for friction fires.

Instead of the bicycle tubing can you not use heat shrink wrap"?

@westcoastwoodsman2289

2 жыл бұрын

Thank you for watching! You definitely could use large shrink wrap. I like to use bicycle tube because you could use it to make bands or burn it if needed. Use whatever you have handy to fasten the fire steel to the sheath. Its most important thing is to have the fire steel attached and with the knife when you need it.

Thanks for telling us the 6.5mm because hearing 730seconds .. i was like what the hell is that hahah.. greetings from the Netherlands..

@westcoastwoodsman2289

Жыл бұрын

If America would just switch to the metric system, it would make their lives easier! 😁

Why ?

I like the craftsmanship. What's the brass plug for?

@westcoastwoodsman2289

4 жыл бұрын

Thank you. The brass plug is added so you can use the knife handle as your block when using a bow drill. I will edit the video and add that information soon.

@westcoastwoodsman2289

4 жыл бұрын

Johnny, I made a short demonstration video that explains the plug a little better. Again thank you for bring it to my attention that it was not explained in this video.

I added a ferro rod, duct tape, a heap of paracord, fishing hooks, water purification tablets, fishing line and more. It was far to chunky so I removed it all. I now have a bare sheath again. I did my spine at 90 degrees.

which ferro rod are you using here

@westcoastwoodsman2289

3 жыл бұрын

Just a regular Coghlans type ferro rod. The handle that Coghlans uses is a generic type that most of the "cheaper" ferro rods come with. They all nest nicely with the Mora sheath.

Why doesn't your handle hole go through both sides of the handle?

@westcoastwoodsman2289

3 жыл бұрын

It is meant to be used as a block for a bow drill fire making set up. I have a video link in the description. Video isn't great but it demonstrates the idea.

@christopherskipp1525

3 жыл бұрын

@@westcoastwoodsman2289 OK, that makes sense.

Instead of bicycle tire piece, why not use a shrink tube? It will fit perfectly once heated

@westcoastwoodsman2289

3 жыл бұрын

That is a good idea. It would give it a cleaner look too. I'll try it out.

@georgenewlands9760

3 жыл бұрын

The butyl rubber of the inner tube can also be shredded and used as tinder...you obviously have the fire cord but you can just use bike inner tube to attach the ferro rod to the sheath for emergency use.

Compromise the strenght of your blade so you can list of a pot of the fire like you could with a stick? Mmmmmm no thanks, i sugest a hairband in the belt holder to secure the knife to the sheath, verynice video thanks

@westcoastwoodsman2289

3 жыл бұрын

Thanks for watching. I like the hair band idea. I will give it a try. I suppose the notch does compromise blade strength but I haven't found it to be an issue for me yet. Ymmv as I do baton lightly on occasion but I don't usually use my belt knife for heavy work. I hope you find the other mods useful.

I think I’d rather just use a sturdy forked stick or limb to get a pot outta the fire. I get that you have your reasons, but to me personally? Idk man, I just don’t like the idea of jimping the tip of my knife.

you must filing patent for this design #kidding

@westcoastwoodsman2289

2 жыл бұрын

Maybe the folks at Mora will watch the video and put out a modified version of the Companion for us 😀

My mora looks smaller irl

@westcoastwoodsman2289

3 жыл бұрын

Looks bigger in the video because I have small hands :)

Please learn how to use and aim camera

@westcoastwoodsman2289

3 жыл бұрын

Thanks for the advice. I'm just a guy with a gopro strapped to his head :) I am trying to get better at filming and editing but it is a slow process for me as most of my experience is related to outdoor work / activities and not in technology.

@smsgtbulldog

7 ай бұрын

Nicely done!!!