Hello Everyone, Happy New Year!! Thank you for watching!!

Muy muy muy bueno excelente todos tus trabajos 💙💛💙👏👏👏👏👍

All great tools, but that pipe-holding-angle marking tool is awesome.

@axcreates_official

Жыл бұрын

Thank you. 👍

Outstanding job. Unlike other DIY channels you make tools and stuff that actually works.

@axcreates_official

2 жыл бұрын

Thank you for your support.

At last! Very original ideas! AND NO ANNOYING MUSIC! Thanks! Keep up the good work. More power to you!

@axcreates_official

2 жыл бұрын

Thank you.

😂😂😂.смеюсь и плачу ,из всего что увидел это струбцина перед орехоколом. Потом просто не стал смотреть.

Man o man, you are good, I watch your builds every week, very nice work! I can’t pick a favorite because they are all excellent. I really like the way you build a swivel end on a a piece of all thread. This makes your clamping builds tighten up without the work rotating. Very nice!, post a page now and then showing a dozen final pieces. This allows viewers to see all your creativity at once! Thanks for doing these projects ,so inspiring to watch. What kind of welders do you have? You are a wiz with that bandsaw. You are awesome!,

outstanding job

@axcreates_official

3 ай бұрын

Thank you very much 👍❤️

Beautiful job thank you for sharing

@axcreates_official

Жыл бұрын

Thank you for watching ❤️👍

Well done Brother!

@axcreates_official

3 ай бұрын

Thank you kindly!👍👍

Excelentes videos educativos,gracias por enseñar a resolver de una manera fácil y económica. Bendiciones.

plein de bonne idées merci bonne année à vous et votre famille etvos amis et plein de vidéos en 2022

@axcreates_official

2 жыл бұрын

Merci pour votre soutien constant. Bonne année, que 2022 soit une année prospère pour vous et votre famille..

@sergefaroche959

2 жыл бұрын

@@axcreates_official merci

Herramientas practicas e inspiradoras muchas gracias

Zseniális ötleteket láttam mindig tanul az ember akármennyire tartja magát jónak köszi!

@axcreates_official

2 жыл бұрын

😀👍

Great video a lot of good ideas

@axcreates_official

2 жыл бұрын

Thank you. 😀

Your skills with welding MIG and TIG are impressive, and make our stick welders look a bit crude, though they get the job done. Watching these vids is therapeutic ​- as with the restoration channels, it's so satisfying to see everything come together.

@axcreates_official

2 жыл бұрын

Thank you.

@danielcruzprado5495

2 жыл бұрын

0qa

Mantap bos karya seninya senang saya menontonnya sukses selalu👍👍👍

new sub here, i appreciate no music just your video

@axcreates_official

Жыл бұрын

I appreciate that!

Ótimos trabalhos...Parabéns...

@axcreates_official

2 жыл бұрын

Obrigado 👍

Happy new year !!! Thanks For Sharing !!!

@axcreates_official

2 жыл бұрын

Happy new year! Thank you.

This is a university about great ideas TKS from Brazil and great new year for all !

@axcreates_official

2 жыл бұрын

Thank you!! Happy New Year 🎊

Muy lindo su trabajos

Excelente Nivel de Creatividad Gracias x Compartir

Great projects and video production values- very impressive. Thank you.

@axcreates_official

Жыл бұрын

Thank you 👍👍

Great work sir thanks every project wow Amazing thanks for sharing sir.

@axcreates_official

Жыл бұрын

Thanks and welcome

Me han servido de mucho.he aprendido muy buenas técnicas de corte y soldadura

@axcreates_official

2 жыл бұрын

Gracias, saludos.

Good ideas, thanks for sharing!!

@axcreates_official

2 жыл бұрын

Thank you.

You're the best metal worker I've seen thanks for your videos, I hope to learn something from them.

@axcreates_official

2 жыл бұрын

I appreciate that! THANK YOU FOR WATCHING!!

@markgrant8771

Жыл бұрын

oh dear he is far from the best welding plated bolts with out cleaning the zinc off not cleaning mill scale off and very bad welding technique

you make great stuff!! you really take pride in your work and it shows! not many do anymore!!

@axcreates_official

2 жыл бұрын

Thank you for your comment.

Good ideas mash'Allah

This has some good ideas. The video is much too long . I want to see what you have made, but not how . Unless I want to make the tool. But very good job on the tools and instructions.

great 👍

@axcreates_official

3 ай бұрын

Thank you! Cheers!

Отличные идеи.Спасибо.

@axcreates_official

2 жыл бұрын

👍👍

Great!

👍 Happy New Year

@axcreates_official

2 жыл бұрын

Thank you!

Умница.

Thanks for your videos I have learned a lot just watching them. wonderful skills...keep it up..good work great job. 👍🇩🇴

@axcreates_official

Жыл бұрын

Glad you like them!

سلام ، بسیار بسیار عالی است . دست شما درد نکند . خیلی زحمت کشیدید که به همه یاد داده و می دهید . خدا به شما خیر بدهد ان شاءالله .

@axcreates_official

2 жыл бұрын

ممنون از آرزوهای خوبتون از حمایت شما متشکرم

Excellent job well done I like it

#3 is actually kinda decent. 🤔

@axcreates_official

5 ай бұрын

Thanks. 👍

On item #1 I think an adapter to sharpen drill bits would be a good idea. I've got a neighbor with a 14 year old kid that is eager to learn fabrication. I'm going to have him build some of your projects. I have a very nice welder setup that he can learn with. I want him to have a good skillset by the time he's 18. Then he can earn some side money while going to college if that's his choice. Hopefully I can teach him AutoCAD along the way.

@sheyleaison705

Жыл бұрын

Wonderful to hear of a "neighbor" man doin this world a bit of good in helping our youth become better people in society where the majority of the world these days allows them to fail them successfully. Wish ya lived in my neighborhood to get my sons this kind of lesson that I am sure he would love to be part of. As a single mother he hates that I know all the stuff he likes in h.s. shop class just bc I don't think there is the girls in the classes like I had started a trend for back in my days of shop class in h.s.! This is the kind of work that my father did for a maintenance crew in a factory mass produced & distributed caskets ⚰️ all over the world! He made important things that helped to make the company succeed in it's industry to where the company is to this day, with fabricating thingamajig that raises the ⚰️ from the assembly line and rotates the entire ⚰️ 180° to ensure ⚰️is given a proper evenly distributed coat in the painting/finishing process and also removing the &/or eliminating defects from human doing it by hand. The task was given to his co-worker & he was having a issue trying to complete it by a deadline, & my dad ask him after watching him continue to struggle bc he had not ever been given a challenge w/out instructions on how to fabricate something like this b4, so my dad showed him how to fabricate a working hydraulic⚰️rotating thingamajig for the assembly line, guy put my dads advice into reality & even let the big wigs know that he did not create it but got the input from someone lower on the seniority totem pole. My dad in the end of it got the credit & it was bc my dad offered something that no one else was willing to show him what he needed to do; instead of watching a man successfully fail w/ the task that he was given. While he was facing a possible demotion or termination if he did not find an improved solution to make the ⚰️ paint/finish step in the manufacturing process that humans were making common errors while rotating the ⚰️ & causing them to not be coated properly & a loss in quality. It never hurts the world when you share good & useful knowledge with one another w/ the society in today's world may never find how useful it is to be this kind to one another.

@guillermosantana1565

Жыл бұрын

Great idea and good did.. if the kid deside to do it it will be an excellent choice..thanks for having the kid in mind and heart worring about his future... God bless you 👍🇩🇴

Always fantastic.

@axcreates_official

2 жыл бұрын

Thank you. Happy New Year 🎊

I don't do such things by myself but i do have a technical mind. These are awesome lab hacks. Keep it up

I had to stop and comment at #5! I wanna see more of that bad saw tool! That looks pretty slick! Looks like the porta saw attaches right to it?

@axcreates_official

4 ай бұрын

YES , THANK YOU FOR TAKING THE TIME TO COMENT!!❤️👍

Saludos! Genial el contenido.

Thank, you for you're video

@axcreates_official

Жыл бұрын

Thanks for watching!

@gerlandkent6377

Жыл бұрын

You're, welcome.👍

All nice items, but by the time you purchase all the items and time to build it’s cheaper to buy equipment!! And all 15 items was built using table vise and hand held drill, angle grinder etc

todas están como para fabricarlas para el taller, ahorrarían tiempo para muchas cosas.👌

@chepevera1614

Жыл бұрын

Sobretodo el quiebra nueces 🤣 Me imaginé al negrito ese que ve videos complicados sacando un exprimidor de limones para hacer lo mismo y poniendo su cara de "ay no mms" 😅

ai sim hein. ja pulei de facada no like, merece

مبدع وجميل تحياتي لحضرتك

@axcreates_official

2 жыл бұрын

شكرا جزيلا لك.

Класс 👍👍👍

Happy new years and hopefully more invention tool will be this 2022 ....

@axcreates_official

2 жыл бұрын

Thank you. Yes, more to come! 👍❤️

The best!!! Show!

@axcreates_official

4 ай бұрын

Thank you 👍❤️

Still love the nutcracker ! =D

@axcreates_official

2 жыл бұрын

👍👍

Good job sir👍👍

@axcreates_official

2 жыл бұрын

Thank you.

After all this is going to be an ordinary hairbrush

The best D I Y thank s

Tds muito show

Make fishing pole holders

@axcreates_official

2 жыл бұрын

👍

Bunicimo

Your videos rock! Thank you. Where do you get the magnets you use?

@axcreates_official

2 жыл бұрын

Thank you. I use old speaker magnets and any magnets I can get my hands on. These particular magnets I get at a local hardware store, but you can get them on online, Amazon.

Your video is useful I have learnt a lot and I have an Engineer since I was 21. I'm a subscriber now. That's for some great ideas, keep it up.🧐👍🤩🤑🤮🤑🤓

@axcreates_official

Жыл бұрын

Glad I could help and thank you for the sub! 👍

BRAVOOO

🔥🔥🔥

@11:30 Ideawon't last past one use, as the magnets will die after getting hot.

Good👍

@axcreates_official

2 жыл бұрын

Thank you! Cheers!

👍👍👍👍👍

What kind of gloves are you using?

Well the circle cutter is something I've never seen on here, the rest are repetes

Ide2 yg cemerlang

Buenas noches.necesito información para fabricar prensa.con gato.para sacar rolineras.h

خیلی عالی

would be nice if you told what the tool does or its name

yahshi

سلام درود برتو

I always enjoy your content. I am a bit confused as to why you went to the trouble of making a tubing notcher and not use it on any of the subsequent devices.

@axcreates_official

2 жыл бұрын

Thank you. I don't need all the tools I make. I also do it to help others and provide ideas. I don't think I've had the need to use it. Happy New Year.

@cesarpaz9213

2 жыл бұрын

No amigo puedes sintetizar piezas te complicas mucho mucho

Do you realy miss a pilar dril ?

What is the name of that tools??

genius im afraid i am a copier i can make it but cant design it Why do you swap welding methods stick i understand to get penetration but mig and tig? If you had plans, dimension etc i would pay for them Don

Lo siento pero es un vídeo muy largo , se hace difícil de ver

@axcreates_official

2 жыл бұрын

Gracias por el apoyo. Felíz Año!

what is the tool what does do you never said

💪👍👍👍👍👍👍👍👍👍👍+

@axcreates_official

2 жыл бұрын

👍❤️

@user-hl5ws3pq6v

2 жыл бұрын

@@axcreates_official 🤘🤝 from UA

🙋‍♂️👏👏👏❤❤❤👌🤝

@axcreates_official

Жыл бұрын

❤️👍👍

just buy a vice easier

أنت أستاذ تصميم عدد وآلات

Вроде как и прикольно,...но колхозно. Тиски вполне могут заменить 2/3 этих так называемых инструментов. Какой в них реальный смысл?

🥴

Молодца. 5+++