Just got this exact holster. Much more comfortable than the stranton tactical holster I had. I’m not disappointed in this purchase.

I like this guy. Going to look at your Glock 19 OWB holsters. May also get this for the P365 when I make that purchase! Appreciate all your work making solid carry options.

Just got mine in the mail today!! Love it

I recently picked up this holster (M6), and it's been great! I did make one addition however that has made it even better (for me). I attached a small Wedge from T1Concealed to increase how much the upper area, and the pistol grip pushes into you.

Just ordered one for my G23 with a Pl Mini 2 Valkyrie... Can't wait to try it out

Just got mine and I’m super happy with it. Thanks

@WerkzHolsters

2 жыл бұрын

Wonderful! That particular holster has taken a number of revisions to get feeling "right".

I’m waiting for my iwb holster from Werkz now love their holsters gonna be running my xl with a tyrant t-comp holosun 507kx2 and tlr -7sub

Finally purchased one. Have heard many good things about it.

@Strawman333

Жыл бұрын

Nearly a year later and carrying almost every day, and night I can testify, that this holster is my favorite light bearing holster out of a dozen that I own.

Okay how you guys cut the holster allowing for a full grip on draw with a claw is amazing

@WerkzHolsters

3 жыл бұрын

Thanks for the positive feedback! Our design means that we don't need support under the trigger guard to prevent unwanted motion, and that allows us to fully undercut the trigger guard area.

Thanks looking for this, just bought one 😎

I just bought a werkz holster for my G19x with an olight baldr mini. Very nice holster for a great price. If I decide to get the tlr7 sub for my p365xl I will definitely buy a werkz holster for it.

@WerkzHolsters

3 жыл бұрын

Thanks for the positive feedback Jason!

Werkz is great. Bought several holsters for several systems.

@WerkzHolsters

2 жыл бұрын

Hey thanks for your support!

Love this company!!!

@WerkzHolsters

Жыл бұрын

Thanks! That's high praise from a founding father!

I was very excited about this! Please please make a left!

@WerkzHolsters

3 жыл бұрын

These are available today in both left and right hand configurations. Go to werkz.com/ to see our full selection!

I love my Werkz light bearing holster for my G19!!! May have to get one for my 365! The claw is amazing! Performs exactly as advertised!

@WerkzHolsters

2 жыл бұрын

Thanks Christopher for your feedback! The P365 / TLR-7 Sub holster we have has many subtle changes that make the holster work well for the subcompact P365.

Just ordered my TLR-7 sub light for my Sig P365 xl, on your holster is the sweat guard, is there room for my safety switch on the guard??

The problem I have is I put an O light mini with an after market rail on the p365 xl. I really like the lights brightness and the way it recharges. I have an owb for a g19x with an O light that’s amazing. Would that end up being a custom holster? I’m sure I’m not the only one that went about installing a light like this, since there are about 3 lights that can snap on the the proprietary rail system of the 365 and 365 xl.

@WerkzHolsters

2 жыл бұрын

I appreciate the desire, but there are a few issues. I addressed some at 2:24 of this video: kzread.info/dash/bejne/o5tq19KBfdmtj7g.html

Will this holster work with the p365xl/TLR7 sub and the the TD 1913 rail adapter

Is your holster compatible with Philster Enigma / and p365 .380? Do you have one that is? great videos -

You guys should consider making different colors. And what is the deal with the round and hills all over the holster?

I cannot find a right handed draw version of your P365/Streamlight tlr7 IWB.

Will the retention still work if the light has a wrap on it?

I bought this holster and one from Vedder.... and I definitely like the Werkz much better.

@McClutchin941

Жыл бұрын

Really ? I just ordered a vedder light tuck was debating between these two might have to order this one to

Just got the OWB holster for the P365 X Macro with Baldr/Mini I like the holster but the pistol does seem to have some back and forth wiggle

@SocozFinest

Жыл бұрын

How long did it take to receive from the time u placed the order

Is this holster compatible with the Phlster Enigma system?

Ordered my lefty m6 holster yesterday. Can't wait to try this baby out when it gets here.. i didn't see an option to add a mag carrier for the sig p365. Did I not see it?

@WerkzHolsters

2 жыл бұрын

Sorry we do need to get on the mag carrier for the P365! That is in my design queue and I spend too much time on other things!

Can you use the holster with and without the light installed? Or do you have to have the light on the weapon for retention?

@WerkzHolsters

3 жыл бұрын

Great question! Our holsters are rather precise, and the retention is built against the light. You'll need the light to lock into the holster properly.

Can this work with manual safety model?

Your website does not offer IWB holster for P365XL with streamlight TLR 7 sub light.

Does the M6 work with a P365 XL with manual safety?

Have you discontinued the knife accessory at 4:13 ? I don't see it on your website.

Wondering when they’ll offer a gen 5 G22 for the TLR8. I’d like to run a laser. But they only offer for the 7 and 7a. And older.

@WerkzHolsters

Жыл бұрын

Yeah, Glock made enough changes to their G22/5 that it doesn't fit in holsters for the G17/5. If we get enough demand, we'll make a holster, but G22/5 demand is low, and TLR-8 demand is also low. I appreciate your confidence in our products, but don't have anything for you right now.

Does this holster fit the Streamlight TLR 7 A?

Will this fit my p365 and my p365XL with sub light?

I have been searching for a holster that will fit my p365xl + tlr-8 sub and think you guys have one of the best designs in the M6. However, I wasn't able to select a right-handed option when searching your website. Will the right handed option be available soon? I also have a Glock 43x + tlr-8 sub combination I'd love to pair with your M6 holster. Will this option ever be available? Thanks for your time.

@WerkzHolsters

8 ай бұрын

We are working on adding TLR-8 Sub models...

The holster works for the 365/365xl?, I have both pistols and one holster for both is just what I need!

@WerkzHolsters

2 жыл бұрын

Yessir. The holster is cut to cover the XL. The shorter P365 just has some extra room at the end of the barrel before the material ends. Additionally comps will drop through.

Do your holsters work the Wilson grip modules? And do you offer an ultiClip?

@WerkzHolsters

Жыл бұрын

Yes, and we do not resell UltiClip, but customer service products@werkz.com can tell you which versions we recommend.

Do you have a Surpa for P365XL 3.7barl.

so, if my sig has the external manual thumb safety will it fit this holster? or will i need to modify the sweat shield?

@WerkzHolsters

3 жыл бұрын

We build all our Sig holsters to clear the manual safety. We test with the M17. You're good to go!

@akui88

3 жыл бұрын

@@WerkzHolsters ok, cool!

Will this work with the tactical application rail? I know the light sits slightly further back with it.

@WerkzHolsters

2 жыл бұрын

We don't test with or support any aftermarket 3rd party rails at this time; our experience has been that each one of them puts the light into a different spot than would be if the light was fit directly onto a factory rail (Sig Sauer rail in this case).

@jav_eee

2 жыл бұрын

@@WerkzHolsters we want a version with the tac rail as it makes the platform look much better

I just got my m6 for the sig with tlr-7 sub, but is it supposed to be so tight on my gun? It looks like it’s start to scratch the front of my slide?

@WerkzHolsters

2 жыл бұрын

Please contact customer service products@werkz.com and we'll take care of you. We fit and test each holster with the actual pistol (not a replica) before it ships.

Will there be a version with a spare mag holder?

@WerkzHolsters

3 жыл бұрын

We will make Radius Mag carriers for these yes.

What did you use to attach the light I don’t want to get a rail attachment that is to thick for the holster

@WerkzHolsters

Жыл бұрын

The P365 specific version of the TLR-7 Sub mounts directly on a P365 grip module. No need for aftermarket rail adapters!

Looking for a IWB appendix holster for my set up. Sig 365XL with Tactical Development's rail, using a Streamlight TLR-7 Sub 1913 light.

@WerkzHolsters

3 жыл бұрын

Sorry we don't support 3rd party rail systems at this time.

@first-namelast-name4198

2 жыл бұрын

They make the TLR-7 Sub in four models. One is specifically for the Sig without any rail adapter.

Sold

Would this holster work with the TLR-8 SUB ?

@WerkzHolsters

Жыл бұрын

Our holster finder at werkz.com/ will show you options for your pistol and light. Currently, we have our M6 holster for the 8Sub / P365. Thank you!

Will this work with the updated TLR7 Sub? I have a holster(not werkz) for the original sub that doesn’t fit the updated version.

@WerkzHolsters

2 жыл бұрын

Once we heard about the new TLR-7 SUB update, we made new designs for these holsters to make sure they work with both versions - the original and the update. So yes! They will now work for you!

@codymcgeeshoots

2 жыл бұрын

@@WerkzHolsters awesome I was kinda worried . Lol

@skyungjae

2 жыл бұрын

Is there a way to visually check the difference between the updated and original? I can't find any comparison photos. I purchased mine pretty recently and I assumed the issues were addressed, but mine rocks back and forth regardless how tight I torque it down.

@WerkzHolsters

2 жыл бұрын

@@skyungjae Usually the key / rail attachment has your light sit in a different position than the original. I would reach out to Streamlight and ask for the updated attachment just in case, and if you're still having issues, they should be able to help you.

What about the p365x? If so this is a game changer!

@WerkzHolsters

3 жыл бұрын

Yes, that's essentially a P365 from a holster perspective. I should put that on our holster finder though to show explicitly that it's covered. Thanks for the reminder!

@Osprey1994

2 жыл бұрын

The P365X is just a P365 with a P365XL grip module...they didn't change anything about th grip besides how tall it is.

I got one. Not super happy I can get my finger on the trigger and pull it while in the holster.

@WerkzHolsters

2 жыл бұрын

Hello! Thank you for letting us know. Please email us photos at products@werkz.com and we can get you taken care of!

@Andoz777

2 жыл бұрын

This is what I'm worried about. Did they get it fixed for you or is that just the way it's got to be in order to allow the wider light?

@Rigatonispaghettioly

Жыл бұрын

@@Andoz777 ?

Is it compatible with the Icarus precision grip module?

@WerkzHolsters

3 жыл бұрын

I think that's a question best answered by Icarus Precision. I suspect their module would need the TLR-7 Sub 1913, or even a TLR-7A, but that's just me looking at their product photos.

I have one it’s very uncomfortable it is made way to big for a regular 365 with a tlr7 . Way to much extra material and creates hot spot when wearing . I’m getting rid of it .

need this! do yall make for 43x too?

@youngboyharless9769

Жыл бұрын

I believe so. Glock 48 as well

Do you guys have these fitting the tac dev rails?

@WerkzHolsters

2 жыл бұрын

Check out 2:24 at kzread.info/dash/bejne/o5tq19KBfdmtj7g.html

Would it still fit snug without the light?

@badcameratv

Жыл бұрын

No, this question was asked and answered already. It uses the light for better retention.

Can you cut the holster so it matched the p365? vs the xl barrel length?

@WerkzHolsters

Жыл бұрын

Customers can (and do) modify holsters to meet their needs and wants. I've seen all sort of creative modifications!

Are your holsters compatible with the philster enigma light bearing rig?

@WerkzHolsters

Жыл бұрын

Yes, Our M6 line is compatible!

I have a sigp365 SAS and I want to buy the TLR-8® G SUB GUN LIGHT WITH GREEN LASER would you have a holster that is compatible? Outside waistband carry and it would be right handed .? I sent a message via your website as well.

@WerkzHolsters

Жыл бұрын

Our holster finder at werkz.com/ currently shows our M6 IWB holster for the P365 / TLR8Sub. I appreciate you reaching out, but looks like we do not have an OWB option at this time.

@namaste597

Жыл бұрын

@@WerkzHolsters that k you for the response

Do u have one for the olight buldar mini

@WerkzHolsters

2 жыл бұрын

See 2:24 of: kzread.info/dash/bejne/o5tq19KBfdmtj7g.html

Do you have a IWB that can accommodate this set up but with tactical development rail installed?

@WerkzHolsters

2 жыл бұрын

Unfortunately, as of right now, none of our holsters work with aftermarket rails.

@Osprey1994

2 жыл бұрын

TD has had compatible holster manufacturers listed for quite some time.

So how about TLR7A with rail adapter?

@WerkzHolsters

2 жыл бұрын

See 2:24 of: kzread.info/dash/bejne/o5tq19KBfdmtj7g.html

Hey can I get that with a threaded barrel that is longer as well with the light and the sight?

@WerkzHolsters

2 жыл бұрын

Our holsters support a variety of common modifications including threaded barrels and tall sights.

@jesusyedra4521

2 жыл бұрын

@@WerkzHolsters oh ok thank u than where can I order one I have my gun with the extended threaded barrel and soon I'm going to get rhe tlr 7 sub light

@WerkzHolsters

2 жыл бұрын

@@jesusyedra4521 werkz.com is where our products are available.

I have a holoson on my 365xl along with the tlr7 It should fit well? Plz let me know :D

@WerkzHolsters

Жыл бұрын

All of our holsters work with red dots. Just make sure you have the correct Streamlight TLR-7 Sub (P365) and you're good to go!

@777gi0

Жыл бұрын

@@WerkzHolsters awesome! I just ordered mine :D thank you guys!

I need the link to buy for my 365x

@WerkzHolsters

2 жыл бұрын

Excellent point. We don't have the P365x listed in our holster finder; I'll get that added! It's the same as the P365 regular. This will work if you're right handed. werkz.com/m6sgp365xlsttlr7spr.html

just got mine in today.. my first impressions are.. great fit and feel!!! (most comfortable awib holster ive ever owned) only cons are that it doesnt click when i holster.. also the belt clip is too stiff.. (minor cons) i highly recommend this holster!!!! edit: holster does not let you draw cleanly.. sticks because my fat gut is pressing the holster tight.. wont work for my fat a$$ im buying a different holster*

@WerkzHolsters

2 жыл бұрын

Thanks for the feedback! The TLR-7 and TLR-7 Sub is notoriously difficult to get to "click". We went through numerous revisions to end up with the design you're using. If we add more retention (for "click") then the light catches and won't draw smoothly. We typically do get a little click at the very end of reholstering on the Subs. If it doesn't have that extra retention when fully seated, please let customer service know; we may need to see if we can help you get it tuned better.

@Redchew10

2 жыл бұрын

I’m 6’4, roughly 330lbs. As a fat guy IWB is challenging in general but this holster negates the overwhelming majority of my issues with it. I have noticed through extensive dry fire and live fire with this holster that I really have to shove my hand in to get a good grip and rip it out as hard/directly up as I can. I have yet to find a holster that works anywhere near as well as this with the light bearing capability. *end user experience may vary*

@WerkzHolsters

2 жыл бұрын

@@Redchew10 Thanks so much for sharing your feedback. If you have a few minutes to chat, I would like to check in with you. Email customer service products@werkz.com and tell them you're Redchew10 from KZread and that Shan wanted to talk with you. They'll get your email over to me. That is if you have time and willingness to talk. Blessings!

Will this holster work with the TLR 7A

@WerkzHolsters

Жыл бұрын

It will not, sorry!

Is this the same for the p365x?

@WerkzHolsters

2 жыл бұрын

Yes. One of our designers is using the P365x with the Sub as his EDC.

will there be a tlr 6 holster?

@WerkzHolsters

2 жыл бұрын

It's not super likely, but you can use our holster notification form at Werkz.com to make your request (link at the bottom of all our pages).

Wish it came with a tuckable clip

@WerkzHolsters

2 жыл бұрын

Not everyone wants those, so we offer as an additional accessory.

@daleorahood

2 жыл бұрын

@@WerkzHolsters thanks I will check out the options

Will this work with sweatpants? Is the clip tight enough ?

@WerkzHolsters

2 жыл бұрын

If you want something tighter, the Ulticlip may be used. That is one advantage of having the accessory holes.

@Osprey1994

2 жыл бұрын

You should just look to the Phlster enigma or get a groove belt or some other webbing belt and wrap that around your waste and then use the ulticlip to grab on to that. There are many ways to carry in sweat pants you just have to do the digging.

will it work with red dot?

@WerkzHolsters

2 жыл бұрын

Yes.

will this holster work with the XMACRO?

@WerkzHolsters

Жыл бұрын

It will not. We have a dedicated holster for the XMacro. You can use our holster finder on our website and it will take you right to it!

@tmharmon

Жыл бұрын

@@WerkzHolsters I checked the site but I’m running a TLR7A on the Macro, didn’t see that combination

Looking for a holster that can fit my Sig P365XL with a TLR 7

@WerkzHolsters

2 жыл бұрын

The TLR-7 does not fit on a factory P365. There are far too many different aftermarket rail products for the P365 for us to even begin making holsters for them.

@jerseyltd

2 жыл бұрын

@@WerkzHolsters no i have the XL with a rail. I was wondering who makes holsters to fit my 365XL with a TLR 7a light

@jerseyltd

2 жыл бұрын

Or do you mean the p365 in general?

@WerkzHolsters

2 жыл бұрын

@@jerseyltd Yes. I mean the P365 and the P365XL. www.sigsauer.com/p365-xl.html That pistol doesn't have a pic rail, so the TLR-7 (NON-SUB) won't fit. We have holsters for the P365 and the P365XL with the Streamlight TLR-7 Sub P365 (specific model for the P365) as shown in this video. Hope that helps!

@jerseyltd

2 жыл бұрын

@@WerkzHolsters thank you so much

shoot.. look right look left.. derp!!

@HeronMarkedBlade-ef7zz

2 жыл бұрын

Having been in firefights you would be surprised how easy it is to get point fixated. The look around looks stupid, but it's good training to keep situational awareness. You dont want to drop a Mahdi, just to have his bunk buddy brain you from the flank.

Gun will literally not come out of the holster , even with screws loosened , i gave specific information about my gun . Not wasting my time shipping it back either . Literally trashed it after scuffing up my gun & tlr-7

@WerkzHolsters

Жыл бұрын

Hey Nick! I'll get you taken care of! Can you please email me at JamisonV@Werkz.com

Just bought this. It rides too high for my taste. Probably will return mine.

@WerkzHolsters

Жыл бұрын

The M6 clip can be moved right height lowered. If you bought the M7, we have another option for you that we just released, the Origin. werkz.com/o3sgp365xlsttlr7spr.html Either way, customer service will take care of you. Blessings!

@raudi

Жыл бұрын

@@WerkzHolsters I bought the m6 and moved it to the lowest position.

@WerkzHolsters

Жыл бұрын

@@raudi Got it. Thanks for the feedback. The lower position tends to put the trigger guard below the belt line, but if that's not enough, you can either return it or use c-hooks to further lower. We have a satisfaction guarantee... get with CS and they'll take care of you.

Why is that irritating background noise necessary? It adds nothing and serves to complicate understanding what is said for the hearing impaired.

@WerkzHolsters

2 жыл бұрын

Thank you, well work on having higher quality audio from now on.

Are these compatible with the phlster light bearing enigma?

@WerkzHolsters

3 жыл бұрын

Our M6s can be used on the Enigma, but you will need to remove the claw off our holster.

Does the holster work with a P365 Wilson Combat frame?

@WerkzHolsters

Жыл бұрын

I don't have the that frame here, but Wilson Combat advertises their frame to be holster compatible, and from the pictures I believe it is.