Thanks for watching! Subscribe for more content involving my garage, the Datsun 280z, as well as my Cayman S!

Super job !!

@JordanPayneLV

2 жыл бұрын

Thank you! 🙌🏻

Glad it all worked out for you!!! Nice job

@JordanPayneLV

3 жыл бұрын

Thank you man, I love the lights 👌🏻👌🏻👌🏻

Nice vid, but I wouldn't braid the power supply lines, just because it would make it harder to troubleshoot/replace one of the lines if you have a problem. Also, you should make sure you're using rosin core solder for home electrical + lead free electrical solder flux + a soldering iron meant for electrical if the temperature isn't adjustable. The flux and/or rosin core clean the surface area of copper as it melts, making a better electrical connection with less resistance/heat during normal operation.

@JordanPayneLV

10 күн бұрын

Good to know in hindsight; thanks! So far it’s still working well so I’m thankful for that :)

Best video for garage lighting hands down 🙌🙌👍👍 I will be doing something similar to my garage gym once I get some other projects done!

@JordanPayneLV

Жыл бұрын

Glad to hear it, thanks for watching! These lights are great you’re gonna love ‘em

Great video man, the 12 pc definitely was worth it! Garage looks fantastic

@JordanPayneLV

3 жыл бұрын

Thank you man! I’m still very happy with how the garage is lit, awesome value for money

Nice video, thanks! Came across it after I installed our Barrina lights and great minds think alike. Ours are almost identical but I used two fixture kits with 10 lights each. I went with 5000K as the 6500K lights are just a little too blue/white for me. FWIW, there are drywall anchors that work great with the supplied brackets. They are #4-6 x 7/8". I bought them from Home Depot for a few dollars. I also added the additional wiring to reach the original junction box. SinLoon T5 T8 LED Lamp Connecting Wire works perfectly with Barrina lights. A laser light will cut measuring and mounting time in half. 👍 Keep up the great work!

@JordanPayneLV

2 жыл бұрын

Thanks man! Great minds think alike for sure! I thought maybe I’d get one more kit to light behind where the garage door is but I’ve just been lazy for now. I appreciate it dude thanks for watching 🙌🏻

I really enjoyed the video. You convinced me to wire directly into my ceiling rather than use the plugs that come with many of these LED light kits. I do a lot of detailing and the more light the better, especially for ceramic coating applications.

@JordanPayneLV

Жыл бұрын

Definitely an awesome setup to have for detailing, I’m sure your garage is going to look great 🙌🏻

Don’t know how I missed this video. Definitely going to do this to my garage 👍

@JordanPayneLV

Жыл бұрын

Do ittttt, I love these lights 👌🏻

@fresnoz

Жыл бұрын

@@JordanPayneLV most definitely 👍👍

Great job. I would've placed some down the center as well

@JordanPayneLV

2 жыл бұрын

Thank you, and thanks for watching, yeah having a rectangle at each parking spot would be great - they are super bright though so if you have it just on the perimeter it works well, if anything I might add some to the back wall where the garage door is in the future

Hahaha I can almost feel your excitement when the lights came on! Looks good man! Gave me so much inspiration as I'm trying to look for lighting for my garage also. With your "perimeter" setup, how's lighting in the center of the garage, for example when you need to work on the cars? I thought you should've replaced that channel with another strip of light for better lighting in the center.

@JordanPayneLV

9 ай бұрын

Thanks man, I was excited! The lighting is great for working on cars and the perimeter still works perfect. I could use some more toward the garage door but that’s the only thing I’d change

I have 60 or 65 of these same exact lights installed over 3 years ago at my warehouse and they are awsome . Not single one ever blew up yet and they have been on 24 hours since 3 years now ! Awsome lights for fraction of the price . One thing I am not sure about in your install is the “speaker wire” as you said , you used to power them on to main house wire , not sure how many gauge is that wire you installed , although these are low powered led lights but it takes in full 110v, and I think if u hage them on for longer period of time those wires should short due to heat ! Unless they are high gauge wires to take in 110v! None the less nice install 👍🏼

@JordanPayneLV

Жыл бұрын

Thanks! I do remember that the wire I bought was thicker gauge than the supplied connector, so that made me feel good. I’m glad to hear yours are doing so well, same with mine - no issues yet 👌🏻

@carlod545

Жыл бұрын

@@JordanPayneLV Can I ask where you got the laser from? Sorry If I missed the answer already

@JordanPayneLV

Жыл бұрын

@@carlod545 at lowes but they’re pretty easy to find on Amazon too!

@carlod545

Жыл бұрын

@@JordanPayneLV Thanks. could we ask how many inches from the wall you installed your lights?

@JordanPayneLV

Жыл бұрын

@@carlod545 I’m not sure exactly but my goal was to ensure that they were centered, I think it was about 14 inches or so

Curious if the mounting screws are still holding up fine after 3 years. I just bought these and was wondering if those simple screw mount would be good enough.

@JordanPayneLV

2 ай бұрын

Still holding up fine, I used double sided tape as well though

Awesome video! How far apart did you mark for the brackets?

@JordanPayneLV

2 жыл бұрын

I’m sorry man I don’t remember but you’ll have to lay out your lights and make some measurements for yourself. About 3 inches Inward from the outside point of light

@scottmuench6855

2 жыл бұрын

the lights are 46" long so I spaced them 23" apart - tip use cardboard from box to make a 23" template to quickly lay them out (from end of first light 11.5", then 23" from then on provides 2 clips per light all spaced perfect)

great video! i'm about to do mine as well and noticed the instructions said not to link a certain amount of lights together. have you had any issues? thanks

@JordanPayneLV

Жыл бұрын

Correct, yeah there is some concern with linking many of them together, this is due to the current required and the thickness of the wire and how much power it can take after so much resistance is loaded. The limit of this is vague, some people say they’ve linked up to 6 in a row with no issues. I can say that I haven’t had any issues at all with my setup and even after accidentally leaving the lights on overnight several times, I’ve had no problems :)

@DFinesse88

Жыл бұрын

@@JordanPayneLV sweet. How many do you have linked to the light? I have 1 light as well and want to run the lights on the switch. Thanks

@JordanPayneLV

Жыл бұрын

@@DFinesse88 that’s why I ran 2 sets of wires through the channel in the garage, I think it’s 4 per set of wires.

@DFinesse88

Жыл бұрын

@@JordanPayneLV gotcha! Thanks for the fast response

Great vid, when soldering you should use Flux paste, makes what you want to do much easier and a better connection. I look forward to this install in my new garage .

Is there another way of connecting the wires besides soldering?

@JordanPayneLV

7 күн бұрын

I wouldn’t trust any other method, twist connectors suck. Soldering isn’t hard, you can do it

Would you say the light is still more white in color than blue? I know when you start to get in that 6000k color it starts to turn bluish. Any thoughts? Nice video 👍🏼

@JordanPayneLV

3 жыл бұрын

Hey thanks for watching! I definitely feel that the lights are white rather than blue. If they were 8000k it would be more of a bluish but I’m very happy with the tone of white of these lights. They get a thumbs up from me, and they don’t feel yellow and they also don’t feel blue.

@eatmoreeats9566

2 жыл бұрын

@@JordanPayneLV hi do you know if these lights are dimmable?

@JordanPayneLV

2 жыл бұрын

They may be if you have a dimmer switch, check the Amazon link in my description and maybe it’ll say something about that in there

@eatmoreeats9566

2 жыл бұрын

@@JordanPayneLV thank you, garage looks super awesome ! really like the lighting placement you did there! how are you liking the lighting output from these lights?

@JordanPayneLV

2 жыл бұрын

Thanks man, I appreciate you watching! I love them even still, every time I turn them on I’m like “damn, that looks nice” haha

No issues running all 12 lights to one socket?

@JordanPayneLV

3 жыл бұрын

Nope! To one socket is okay but you need to run separate connections with only 6 lights chained together because the wires inside the lights can’t support the current for more than 6.

@albawdy

3 жыл бұрын

Which exact wire did you get?

@JordanPayneLV

3 жыл бұрын

@@albawdy they had a section at Lowe’s (or Home Depot can’t remember) called “lamp wire” which was a thin gauge wire, and I got three colors. The wires inside the loom of LEDs lights is super thin, so the wire I bought was actually slightly thicker gauge than what came with the Barrina lights

@dannythed

10 ай бұрын

If I want to connect two sets of 6 lights each to a single socket, should I combine the ground wires from both sets and connect them to the screw you showed? And for the connector caps, do I join three wires together: one from the main socket, one from the first set of 6 lights, and one from the second set of 6 lights?

where did you get the laser?

@JordanPayneLV

2 жыл бұрын

I got it at lowes! Could also find them on Amazon

@dragin79

2 жыл бұрын

@@JordanPayneLV care to share a link? I went to Lowe’s last night and could not find one even close to that cheap. Thanks!

@JordanPayneLV

2 жыл бұрын

@@dragin79 this is the exact one that I bought, maybe they’ve gone up in price since Covid?? Or maybe there was a sale going on when I got mine? Bosch GLL30 30ft Cross-Line Laser Level Self-Leveling with 360 Degree Flexible Mounting Device and Carrying Pouch www.amazon.com/dp/B01GJ40TOM/ref=cm_sw_r_cp_api_glt_fabc_BWQSV8GHHCE8W11R0EHE?_encoding=UTF8&psc=1