Best DIY CNC Plasma Cutter
Ғылым және технология
Going over the capabilities of the plasma cutter as well as what is included in the plans.
Plasma Cutter Plans - jdsgarage.bigcartel.com/produ...
Recommended Plasma Cutters - jdsgarage.bigcartel.com/recom...
For all inquires email us jsaction4[at]gmail.com
#CNC #Plasmacutter #DIY
Пікірлер: 239
For more Information you can check out our website here. jdsgarage.bigcartel.com/
You received a sub and purchase of the plans from me !! I have no immediate plans to build.... but for 25 bucks, I totally want to support fellow garage project channel and builder !!
I can't say enough good things about these plans. I always wanted a CNC plasma cutter but wanted to stay in a small budget. This was truly the best option out there. On top of that JD's Garage continues to add upgrades to the CNC table such as the pipe cutting feature and recently added the floating head for Z axis and never charge additional for the updated plans. They even started work on a THC and I am 100% in once complete. I used this plasma CNC table almost 5 or 6 days a week and just love it. I had a blast building this and JD's Garage was always there if I had questions. Thanks Guys!
@RW0-
11 ай бұрын
How much was everything for the project? total cost
@schlomoshekelstein908
10 ай бұрын
@@RW0- u notice they never mention that? ever?
@UnderTheHouse
10 ай бұрын
@@schlomoshekelstein908actually if you just click on the link, you can buy the plans which I thought were pretty cheap really. They also mention the approximate total cost of the unit which is obviously well priced given the materials used. Looks like a solid, well priced machine. I will be buying the plans and building this beast. 👍🏾
@trcwm
9 ай бұрын
@@schlomoshekelstein908it’s different for everybody as it depends on your location, how much you can scrounge and where you buy your parts. Do your own research, it’s not hard. If you’re on a tight budget, Aliexpress is your friend! 👍🖖
@kawataufik5098
5 ай бұрын
Not mention how much cost all
Omg that CNC tube notcher is brilliant!!!
Nice work. I love the use of 3D printing, and that tube cutter is awesome !!
Just ordered the plans, everything looks great! Printing first parts as I type this, Ordering steel on Monday, can't wait!
Love it! I just ordered the plans. I'm no newbie when it comes to CNC machinery, having built CNC routers and milling machines and I knew it was time to get a CNC plasma cutter in the Wet Coast Fab shop. Rather than spending the time designing and figuring it all out, I pulled the trigger on these plans! I can't wait to start building it and putting it to good use, perhaps using the machine to cut out non-3D printer component replacements for the gantry, etc.
I am sold. Bad ass guys, very cool product you have here. Looking forward to building my own - for sure will be buying. The notching of the tubes sent me into the stratosphere
Hey thanks GOD for people like you, that makes others like myself with less money possibilities enjoy having a machine like that and be able to accomplish something they could only dream of!!!! 👍🏽👍🏽👍🏽👍🏽
really great work! I won't be able to build one for a while but when I do I have this bookmarked 😁
JD's plans are great! Saved me a lot of time. Cheers!
This is one of the best idea to build! Thanks for it.
Thanks for all you do and share! I'm looking forward to plans or a kit for the Torch Height Controller.
I've had my plasma cutter for sometime now and as you say it works flawlessly. And I must say your kits are of the highest quality. Thanks for the video!
@pablogoyaz9765
Жыл бұрын
What plasma cutter did you end up using?
@georgechambers3197
Жыл бұрын
@@pablogoyaz9765 I have a Thermal Dynamics 50A and a 50A no name Chinese plasma. Both work fine.
@piwengema4534
Жыл бұрын
I am watching this from South Africa,i am willing to build my own cnc plasma cutter,where to buy the plans,and suppose i dont have 3D printer ,is it possible to ship those 3D printed parts to South Africa?
@georgechambers3197
Жыл бұрын
For that you would have to ask JD directly.
Awesome job! Can't wait to build mine. Thanks, JD
Very nice video. One of these days I'll try and build it (bought the plans already). Thank you.
I have mine almost complete on the assembly side will start the electronics by the end of the week. i hope the THC will be ready soon. Thanks
And it's a cantilevered Cartesian design..bloody awesome!
I bought mine and a few extras for another design as well. Fast shipping and great communication. I definitely recommend this if you want a true budget cutter! Thanks again!
@kawataufik5098
5 ай бұрын
How much?
@jakelords24
5 ай бұрын
There is a link in their description
@kawataufik5098
5 ай бұрын
@@jakelords24 thanks that is say buy the plans $25 that hard to do ! You did completed how much material cost if you build already
@jakelords24
5 ай бұрын
I had the 2in tubing. I used aluminum for the cross bar($12), bolts and fasteners at tractor supply for $9. I priced the 2in at my local supplier for around $110. Electronics were another $120 including shielded wire. My nonHF plasma cutter off eBay was $150
Love the videos I bought your plans. Keep the videos coming
I'm glad to have found this! Just ordered a 3d printer. I may just do this project.
This is so cool! This will be my next build.
So bought your plans, have printed off and looked at vids etc,Fantastic effort to compile all that to be able to purchase it for $25 cant wait to start printing off parts and the build,beyond happy with purchase cheers David New Zealand
@kawataufik5098
5 ай бұрын
What you buy for $25?
I just buy a Langmuir crossfire. And I wish could see this channel before.
I was on the fence about the plans and then.. you brought up the tube cutter. Brilliant! It's a shame it seems so hard to find CNC compatible (with voltage & arc OK output) plasma cutters in the UK at a reasonable price :( .. but the search for one continues!
you can also toss a small 3 flute side mill to finish out your pill shaped holes with the rotary on a plunge base or pin router.
Hi Jd, i just found your channel, gotta say this is awesome been wanting to put one of these together for some time now, looking forward to following your instructions on my very first one. gotta ask, do you plan on upgrading to a bigger table?
Super cool! I want to build one
Can y’all please make a video on operating it. Especially the z axis touchoff and height adjustments . I’m having trouble making it do what I need. Thanks
For anyone wondering about what the plans are like, I. Ordered and they were sent straight away. Very well detailed in clear steps. Just had the last of the electrical parts arrive. Now need th have another read of the plans and connect it together. Once I have that working I’ll order the steel tubing cut to length and all the printed parts from you.
@homeguardster
Жыл бұрын
What is your build cost?
@FartCart
7 ай бұрын
Yeah what’s your build cost & where you located? @gavin6538
I'm interested in seeing or hearing more about the rotary axis tube notcher.
Great home made Langmuir CNC plasma Copy 💪🏻
I decided to tackle this build - with no 3d printing experience and no CNC experience. Bought a "Longer" brand 3d printer and made all the parts. Fabricated everything else in a weekend and had it all assembled and moving smoothly. Bought all the stuff listed in the list and then tackled the electronics. If I would have read ALL the instructions - I would have not had ANY problems - but a quick email asking what I did wrong was responded to quickly and within minutes I was back on course!!! My first cuts were not so great - and it turned out I had a very thin and wavy metal that caused lack of continuity on the plasma - and would "flame out". Put a nicer (not new) piece in and it ran flawlessly. I cannot say enough good things about the effort that these gentlemen put into these plans and project. I do not yet have the z-axis but will be ordering all the parts tonight - and they have a THC amperage management in the works too! My first few test pieces were 2" square and 2" circle to see how true this was running. Dimentionally I was 2.002 x 1.987 square and 1.994 round (there was about .005 variance around the circle). I will try and recalibrate as I think I might have been off in the Y axis... I am VERY pleased! I hope they sell a LOT of plans to make their efforts worth while! Thank you!
@gottadrivem5878
11 ай бұрын
Hello I am planning on buying the plans and 3D printed parts. My question is: Where do the electronics and wiring come from?
very nice and kind Presentation👍
I’m very interested in this, and think I’d like to do it, but was wondering if you’ve thought about how to make this scalable? In other words, can I build the small size you have plans for, then scale it up to a 4’ x 4’ or 4’ x 8’ or 5’ x 10’? Can the axis be made “modular” so you don’t have to rebuild an entirely new table for increased size? Looking forward to your response. :)
These plans seem like a very good value! I’m interested to know what kind of stepper motor controller you’re using.
very impressive job with this project, one question and maybe you made a video that I haven't found is the software for the Arduino. I am guessing its open share but do you have a video explaining how that side works?
Афигенный станок! Хочу себе такой ))
Any tips on tube cuts as far as code examples or changes needed in drawings / code for that?
Great setup🇦🇺
Would totally use this machine in my builds...
I would love to see a tutorial on how to do the pipe decorations like your JD's Garage on a pipe... Is it easy with Fusion 360?
Damn... I just designed a part to be cut from 3/16" thick plate steel. If I had access to that machine my life would be changed forever!!!!!
Outstanding!
Do you have plans just for the rotary attachment? Also do you run THC on your z axis?
Any thoughts of making it also capable of cutting square tube?
Hello, its excellent project What is tube cutting software?
Great video, I'd like to do a project like this. Minus the plasma cutter and computer, what's the approximate costing to make this? Metal, controllers and all the misc parts..etc. thanks
Super cool!
I have a plasma table but having trouble getting a G code to the table to cut the part missing the specific sequence hoping to learn it so I can open this machine to a whole new way to build things.Thanks
Hi, I am interested in buying the metric plans, when a new revision comes out or an add on such as torch height will be be given the lastest version? Thanks
Just got plans and kit with z axis kit very good quality I'm ready to get my steel and but I am going to increase my overall size to cut 36 x 49.5 sheet so I iam going to order 2nd kit to fully support grantry like the crossfire pro table . Plans are very simple and thought out. Order and build today
@branchandfoundry560
9 ай бұрын
You just answered my question, thank you! Sitting here thinking, "How & why did they come to the decision of 28x30" size, and how could I make it at least 4x4ft?" I get 4x8ft sheets, so it'd be a real pain to cut down to fit this table size.
@bobrossi1185
9 ай бұрын
@@branchandfoundry560 well as they said cost was mo of the channel and the water pan only one i don't mind buying 2 pans I found vevor 32x32×2.5 stainless . Iam all in for $1500 as for first time cnc build and want to do router too not willing to spend 5k for plasma and then 5k + for router as I have fabrication tools don't want to do full 4x8 tables don't mind 2 /4x4 tables that I can move around they have limited space. I do too but don't mind loosing like 5x10 is for 2 tools i Have small sign company so 4x8 or 3x8 ,2x4 seems pretty good for me and learning curve.
@branchandfoundry560
9 ай бұрын
@@bobrossi1185 Thank you
i have a hypertherm powermax 45 xp without the cnc remote connector. do i just bypass the trigger wires with a relay or something with your setup? thats the only question i have befor i buy your plans and get started.
I've bought the plans, the 3d parts, and everything I need from Amazon for the table and z-axis except the 25 608ZZ bearings linked on the BOM sheet. They have been out of stock or too low of stock this past week or so that I've been checking. Do you have any other bearings you'd recommend?
Hi, which software do you use to program the tube cutting? thanks and great plasma..
I'm following you for quite a time now and absolutely love your projects! I will be soon acquiring your plans for the plasma cutter, but one quick question - how are you producing the GCODE for notching?
@dylandesmond
Жыл бұрын
Just use fusion and do a cut-out. Use your x axis or y axis to rotate the tube...
@mtyquinn6
Жыл бұрын
They have a "soup to nuts" video demonstrating a blank Fusion 360 to making a bracket, to setting up the "tool" - to the actual slicing - that creates the GCODE.
great, thanks 👍
Cool as hell!
Hi JD I would like to know what size box is used for the electronics also what gauge wire is used and the shielded cable and can i get them, I don" know much about electronics. Thanks much
How big a table can you build will that arm support
Couple suggestions - plans should have version/revision #'s so as you make improvements/adjustments one can clearly see what version of plans you're on. The 3d printed washers I received for the bearing blocks were too thick, impossible to get the bearings + washers into the bearing blocks as shown in the plans. I flattened one of the washers each side and that helped make the assembly possible. The tube frame bolts are about 1/2" too short. I got mine together, but it's not great with only a couple threads in the nut. Plans should spec frame bolts (2.5" and 4.5" 3/8 bolts) to be 1/2" longer.
@jdsgarage701
Жыл бұрын
Thanks for the heads up, these issues are being rectified.
Are you able to supply your kits to the UK
hi I have bought the plans couple of weeks ago, What are the 3d printed parts made from ? place abs ?
What thickness tubing did you use for the build?
Looks great on KZread
25 bucks, and its in METRIC!?!. Take my money. Thank you by the way, this feels like something I a father of two toddlers will actually be able to do within a year or so =D
Any suggestions around what type of plasma cutter to avoid? Ie avoiding HF arcs d/t emf noise? Is a pilot arc system ideal/necessary?
Thank you for creating the plans and generally setting this all up. I've ordered mine and wondered if you have Facebook or the like?
Hi, how thick will it cut ? Is it only for steel cutting ?, can it be made bigger ?
I'm contemplating getting your plans but before I do I'd like to ask this, are you using openbuilds cnc controller to run it?
Is there a place where we can send you message about things that you might want to change or fix in the plans? I'm in the process of building it and i found a few kinks that could be ironed.
I'm thinking of buying the plans but I'm wondering if I can get all the parts needed in Europe? Don't want to spend a lot of money on importing the parts needed for this build.
Machine is done now how about video on openbuilds software to run machine this video was nicely done
can you make a video tutorial how to connect the 2-axis SF-2100C CNC controller to the diy cnc plasma cutter
Hey guys, I am having a hell of a time with the Arduino. I have a Due Board. The Openbuilds firmware tool no longer has the Arduino support, i try loading it (Grbl 1.1) n the IDE, it doesn't show up. Can you guys do an updated video on the programming?
Nice!!!
What size air compressor are you running?
How about complete start to finish tutorial on your kit
For those that have built one do you have a Ballpark cost for the complete build?
Where can I get the kit? I am ready to buy!
Quick question will the electronics work with Lotos LTP7000 Pilot Arc machine? Don't want to order a bunch of parts and then find out it won't work with the machine I have. Thanks for the info.
Do you supply dwg files so we can cut the pieces out with a plasma table? I have a buddy that could cut the pieces out for me to enable me to build this. Also the files for the 3D printed parts? I have a 3D printer.
@chevyss1705
Жыл бұрын
My questions too an one of the reasons I have not bought the plans yet.
Hello! I would like to buy the project but I would like to know what MOTORS you used to find someone on the market. In Argentina is not easier find motors and drivers. Regards!
silly question but can I get plans in metric? if not happy to convert my self just think that it might already be out there, otherwise looks great, looking forward to buying plans and making it, does it also come with plans for the pipe cutting rotation thingy?
@fortheloveofbees4853
2 ай бұрын
just answered my own question and see that you have metric version of plans thanks in advance and looking forward to making this, might take me some time to make.
nice !
What plasma cutter do you use?
Can i buy one ready to go?
Can you build a 5x10 with these plans?
Is there a file to use to cnc plasma the motor plate bracket?
Sold
What cable goes from the back of the plasma cutter to the computer ? It doesn’t come with it
Please what is the make of yr plasma cutter that you are using??
Great video thank you so much for the material
@jdsgarage701
Жыл бұрын
Belt technology has come a long way in recent years. When used correctly they will last and extremely long time and can hold better accuracy than lead screws. We have had the table for just about a year and have used it in a wide variety of conditions and have not been able to measure and loss in accuracy. The life of the torch tip will make far more of a difference on accuracy than the belt wear ever will.
@red_juan
Жыл бұрын
@@jdsgarage701 Great, thanks for the info I wish you a good fortune
@tazanteflight8670
11 ай бұрын
Your point about belts is sound, but this isnt a cnc/router machine. Belts would be a poor choice for a cnc/router machine because of the force required to push the router bit through material. In this case the belts are just used to position the "print head". Also belts are fiberglass reinforced, so they dont stretch.
@red_juan
11 ай бұрын
@@tazanteflight8670 Alright I see, thanks a lot for that, however I have a theory, because of my obsession with CoreXY, is it doable to build a 1.6m x1.6m CNC plasma machine? Because for that I will need about 12 meters of belt. A friend of mine suggested instead of belt to use Chain, cause it's rigid and reliable and he says they last forever (sort of), now the reason behind my theory is; a CoreXY CNC plasma is 1 motor less which means reduced cost but still efficient, precisionwise it's solid, however the elephant in the workshop, is there a 12 meter+ belt in the market and when it's long does it perform the same as when it's somewhat short, in this video it's 28" X 32" which is 71.12cm x 81.28cm I want to go a bit higher than that. Sorry for long post, thank you very much
@tazanteflight8670
11 ай бұрын
@@red_juan IMO corexy is a mistake. Using "binding force" to position a printhead, is bad science. Positioning should be as precise as possible, so dedicated, and simple X, and Y axis drive will always be more accurate. Also a long belt, or long chain will have a lot of slop. Using tensioners to reduce slop, will only stress the stepper motors. It is interesting, and neat that corexy "works", but it is not logical.
The main thing holding me back is the Ardino, do I have to program it or just wire it up to controllers? I want to buy the plans and parts just gathering information before I press buy.
@barebooger
Жыл бұрын
The software programs the Arduino, no geek needed. See the software video. Openbuilds Control.
They are good but still need a few instructions on some of the parts, but it can be figure out if you look all the way thru
I'd love to work with you to get my custom piece prototyped. If I download the software and get the files to you, would you be able to quote me a price? There's no rush. I'm still waiting for some final mock up measurements before I cut the test piece out of wood to make sure everything lines up with the different test mules. I was going to use primitive means to get a prototype out of steel but If I could just pay you to zip zap it, that would save me a huge headache!!! Once I know it will do the job, I have to find a manufacturer who can make 100 of them for a test run on amazon. If they sell... I'm taking out a loan and ordering big so I can get the price down as low as possible. This could be life changing if it works. Seeing your video gave me hope.
Hey guys, I'd like to buy your plans, but I live in Austraila and checkout is only for US, anyway I can still buy them?
Hello do you ship the 3D. Printed parts world wide?
does it have the info about what motor to buy and the gears and extra accesories like the rollers, why dont you guys just sell the whole thing and let one assemle it, one more thin can it be extended to a longer size to cut?
Hi JDG will like to buy the 3D printed Parts kit but will this kit also include the metric plans ??? thanks !
@flyinpolack6633
4 ай бұрын
yes, it came with both