Buy these bucket brackets! Save 5% with code GWT on JU Fab Works: www.jufabworks.com LOOK AT OUR MOST POPULAR ATTACHMENTS! Speeco Quick Hitch: bit.ly/3NFC0yl Stump Wrecker: bit.ly/3WYa6Tf VersaBracket Combo: bit.ly/3wUPrnl Snow Pusher: bit.ly/3NB4BVw Tillers: bit.ly/3GT1kk1 Core Plug Aerators: bit.ly/3W0R25q Pallet Forks: bit.ly/38wRztu Grapples: bit.ly/3PNNYaZ Dethatcher: bit.ly/3GT9Zmk Tractor Canopy: bit.ly/3IHcvNU WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! USE CODE "GWT" TO SAVE BIG WITH: CUSTOM GRILL GUARDS @ www.5elevendesignz.com PTO QUICK ATTACH @ tractorptolink.com DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store TIRE CHAINS @ www.tirechainsonline.com PREVENT FLAT TIRES @ www.multiseal.us CULTIPACKERS & CRIMPERS @ www.packermaxx.com ALL OEM JOHN DEERE PARTS @ www.247parts.com ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com CUSTOM TRACTOR FLOORMATS @ www.tractormat.com PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: kzread.info LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... MERCHANDISE: stores.inksoft.com/good_works_tractors_merch/shop/home *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

Thanks! I'm test driving a tractor tomorrow.

I just ordered one for my BX. This will make my life so much easier. Congratulations Jeff on a successful business endeavor.

@jufabworkscustomtractoracc6102

9 күн бұрын

Thank you! We appreciate your business!

nice to see you promote a local fab yard making good attachments

Waiting on your Kioti version. Love the product. Some Tie downs would be awesome as well!

I bought one…it’s very well made and the fit was spot on.The powder coat is beautiful also.I love it

@jufabworkscustomtractoracc6102

9 күн бұрын

Thank you!

That's Awesome how Jeff made it a full time Business Congrats!!!😁👍 The produces look amazing. One day in the future I hope to be on your video showing our products.😂 I am just starting out but have high hopes. Keep up the great content Guys. 👍🚜💨☀

@jufabworkscustomtractoracc6102

Жыл бұрын

Thanks MJA!

I needed a tutorial on detaching the bucket off a kubota la344...found it on the web but not on tour KZread...so I decided to say thank you on this video...thanks for your videos!

Have these on my 2038R. These plus a 15' chain are the most useful attachment I have. You can get an amazing amount of work done with a set of simple hooks and and chain.

@GoodWorksTractors

Жыл бұрын

Sweet, thanks for your feedback!

I have recently installed the bucket brackets on my Kubota L2501. Easy installation and should be useful.

Why in the title did you say Kubota bad design instead of Kubota and John Deere bad design. My Kubota far outshines my John Deere

Just picked up the bucket bracket for my BX23s Kubota. This is a game changer. So easy to install. Just bolt it on and go really saves the lip of the bucket and with the 2 hooks just one chain does the job. 👍🏻

Outstanding will be ordering for my BX

@jufabworkscustomtractoracc6102

9 күн бұрын

Thank you!

A nice looking, easy to install, great way to protect your equipment.

The welds look fantastic. Definitely getting some this summer.

I just added the hooks with the handles on my 3033R.. So easy to install and they fit perfect. I also like the fact that they help make the bucket more rigid. I would suggest that maybe he offers receiver hitch bundles with the the receiver mounts.

Great to see a small MI business so I will be ordering one of these

AWESOME!!!

These products are great and are added opportunities in using the bucket.

That's a great looking quality product, I need to save up for one.

@GoodWorksTractors

Жыл бұрын

They are really nice in person too, way heavier than they appear.

got one on my 1025r. Very nice

I have these brackets on my 300E loader. They radically increased the capabilities of that rather flimsy bucket. Great product!

@GoodWorksTractors

Жыл бұрын

Heck yeah, good to hear it Tom :)

Very cool products and ships to 🇨🇦 👍🏻

I've got my 2025R outfitted with JU FabWorks gear (I was sold after I watched your original video featuring them) and I've gotten a ton of work done with them. As others have mentioned, these plus a chain = "who needs a grapple?" Also, I have the HeavyHitch toothbar to give a little more grabbing area under the load (mini forks?). The quality in the brackets is top notch...the included installation instructions were dead-on accurate and simple (not that installing these is particularly difficult) and they just look awesome. I got lots of compliments and comments from the shop folks at the dealership when I had the tractor in for some service. Fantastic investment in the capability of the machine and I especially like that my purchase supports a small business in the USA. As a sidenote, I just wanted to say that I really like that you are bringing in the folks who are making this stuff onto your channel. It's great to put a face to the gear we're purchasing..and makes it all the more satisfying that buying "local" is supporting fellow Americans! I also have a 511designz grill guard..again...largely because of your videos.

@jufabworkscustomtractoracc6102

Жыл бұрын

Gary we greatly appreciate the people that choose to support all the local American businesses!

Used the discount today for a B2601 😁

Some bucket side stiffners would be a great addition. Especially id imagine in a perfect world say 2" x ½" flat stock with a step milled in the backside to sit against the bucket side plate and against the front edge of side plate, and a beveled front like a cutting edge

I have one on the bucket of my B2301 you won’t believe how handy it is!

@jufabworkscustomtractoracc6102

Жыл бұрын

Thank you!

J U Fabworks builds some very useful improvements for my little Kubota l2501.. couldn't be more satisfied. I have the center mounted hook, handle, hitch. It's perfect, just what I needed 👍🏻👍🏻

@jufabworkscustomtractoracc6102

9 күн бұрын

Much appreciated!

Helps to have good decent quality bucket to start out with

I sent Jeff a email a couple months ago about a Workmaster plate for my new Bad Boy 1022. Looks like we are getting one released soon. I want to be on the list to get one. I need the hitch receiver to mount a winch in the front because I keep getting stuck in the mud! I need a way to throw a winch on there and pull myself out.

I called to get one that went all the way across the top of my bent 400E bucket. Not available even special order. Had a local shop bend one for me. Jeff was very helpful and apologized for not being able to help me. I felt bad I could not buy it from him. What a stand up guy.

@GoodWorksTractors

Жыл бұрын

Could buy a middle section and a couple of end sections?

@DUSTEATER2

Жыл бұрын

@@GoodWorksTractors I wanted a 1 pc to help straighten top of bucket, Also gives continuous support from one side to the other.

@fland49

Жыл бұрын

I added a welded strip along the top edge of bucket: it added strength, added safety space to better prevent logs from rolling back toward operator when bucket gets higher and tilted back. And the edge is handy for a chain to be hooked on anywhere along it. Also welded female receptacles in three places at bottom of bucket, with removable steel prongs (held in place by bolts or pins through each receptacle. Handy for digging, scarifying, toting logs or lumber or brush. In a pinch (been stuck in plenty so I know) poke the prongs into the ground and use the loader tilt to help your 4WD pull you out, or push you out backwards. Good to wrap chain or rope around too for lifting. I wound up using only the two outer prongs most of the time.

@fland49

Жыл бұрын

Don’t know how to upload photo with iPad.

Just installed a work plate on my M4D-07, M1811 bucket. Install went smoothly. May I suggest one or two pictures to accompany the written word. Mounting the back plate was a little different and took a few minutes to ensure I had it correct. A picture would have helped to speed up the process and to ensure I had it mounted correctly. I did use the GWT discount code and it did work!! Thank you for that!!

@jufabworkscustomtractoracc6102

Жыл бұрын

Thanks for the feedback Jeffrey, pictures in our instructions is a great idea and will certainly consider it.

I can see myself getting one of these for my soon to purchase TYM T574. I've got some trailers that I move around and put in some pretty tight spots and having one of these on my bucket would sure make it easier. I'll have to check and see if the TYM bucket has the required space to mount their universal bracket.

@GoodWorksTractors

Жыл бұрын

Thanks for watching Pete!

Do you have a video with the hitch pulling a trailer in action?

I don't know if either of you have checked into it, but the option of a third-party facilitator. At the large companies that I work for in past and present. They can handle it all. They can handle the VAT and import with their registration numbers in order to get product in. UPS and Ryder are set up for it.

@GoodWorksTractors

Жыл бұрын

I've talked to a few...I still had to do more legwork than I felt was reasonable. Plus, I've quoted over 100 shipments to Canada and not a single person went through with the transaction after getting the total cost. That became a waste of my time to deal with.

@Stu2366593

Жыл бұрын

Shipping up here to Canada is a pain. Shipping costs, with customs and “handling” seems to be about 50% more than they should be, in comparison to USA rates. There shouldn’t be any custom duties for products under 100$, but they all charge you “duties and customs” even though they actually cannot justify it.

reinforcement strips on the side would sell! I would buy them.

@GoodWorksTractors

Жыл бұрын

I think so too!

Wow you are really close to me..... I'm about 20 minutes away from benton harbor

@GoodWorksTractors

Жыл бұрын

Small world!

I will be ordering one for my lx2610. This is exactly what I’m in need of, since I’m not handy with a welder, the lack of tie down locations on the bucket is frustrating.

@GoodWorksTractors

Жыл бұрын

Before I die, I will learn how to weld!

@lordchaa1598

Жыл бұрын

@@GoodWorksTractors , I tell myself every year that I’m going to learn, but life always gets in the way

@jufabworkscustomtractoracc6102

Жыл бұрын

Sounds great, we have these in stock and ready to ship!

Will any of those items go on the New Holland tractor buckets? If so I'll be sending this video to PA.

What hooks will fit on the Summit bucket? Thanks in advance

I really want one of these for my LS MT225S...

@mikebriggs2k

Жыл бұрын

Unfortunately, the top lip of my bucket is only 3 inches wide...

Would it be possible to put a hay spear in that receiver? Obviously a different approach than having spear at the bottom of the bucket?

I wonder if these could fit a Yanmar YT359 bucket.

Those are handy, but, the BX is very limited in weight capacity. Your taking away from that with the increased tare weight.

@GoodWorksTractors

Жыл бұрын

Don't get me started on a BX rant 😂

Great video! Love the Michigan connection. I would be interested in the universal workmaster plate with the grab handles and not the D-rings. Jeff, is there a possibility that something like that is in the works? Thanks

@jufabworkscustomtractoracc6102

9 күн бұрын

We only have the D ring version in the universal right now. There just is not much room to work with for handles on the narrow universal plate.

Do you have any of these that will fit mahindra Emax or Max models?

Would love to see a extention boom say for setting trusses and beams

@arthurwarman6161

Жыл бұрын

Not a good idea on a tractor.... better on a skid loader.

@jpjp3873

Жыл бұрын

I rigged up my own for setting garage trusses. B2601 did just fine!

Will Jeff come over and install mine?

Did you guys think before you made this about the safety factor Of the hooks being on top Wouldn’t it be better to have the hooks inside of the bucket for the safety factor

Reinforcing bars are a grood idea. I would prefer one with 1/2" holes so it can be plug welded to the bucket side. But realistically, there might not be much of a market. I don't see how you can add much value to such a basic item when a customer can grab bar steel off the shelf and make it themselves and rattle can it good enough for loader work relatively cheaply. Plus, tractor folks tend to like DIYing. It would have to be priced right and have excellent quality. It doesn't seem like an item you would ever want to remove, so why not make it permanent?

@GoodWorksTractors

Жыл бұрын

I hear what you're saying, but companies like Jeff's and many others exist because there's a huge portion of folks that don't have those skills or don't want to mess with making their own. But, those DIY'ers come up with some killer stuff too!

@cdezzz

Жыл бұрын

I mirror what Courtney has to say. I’d much rather just drill/bolt one of. I could take my tractor across the street, but way easier/much more practical to buy one. Goes back to the vid not to far back, discussing purchased versus homemade tools/attachments. And the big pricing difference.

Got anything for Kubota L3560 HSTC

@jufabworkscustomtractoracc6102

9 күн бұрын

We do. We have workmaster plates and front and rear tie down points. Here is a link to our Kubota products. www.jufabworks.com/products/kubota

Love product but no cheap ship in Canada with money exchange and duty

What drill bit did you use for installation

@jufabworkscustomtractoracc6102

9 күн бұрын

It really depends on which workmaster plate. Some take a 7/16" and some take a 1/2" This one in the video was a Irwin 1/2" titanium coated. Thx

Do you know if that "workboss" at the 2 minute time frame will work on a JD 2305?

@jufabworkscustomtractoracc6102

Жыл бұрын

It will bolt on to your 2 outside holes in your front frame and work fine, but we do not advertise it to fit because we suggest 4 bolts to secure it safely.

@gusschaper6136

Жыл бұрын

Yes I understand 4 bolts would be better than 2. Thank you for the reply n keep that it in mind. So I could do a lil fab work n add the two other holes then..

Can I get one for the kubota 4 in 1 bucket?? I would love one

@jufabworkscustomtractoracc6102

Жыл бұрын

Unfortunately we do not have anything for the Kubota 4 in 1 due to how narrow the top is. Thanks for checking.

Where’s the Branson/TYM love at?

@thebonestead

Жыл бұрын

5:50 he mentions about these tractors for anybody asking this too.

Need Mahindra 2638

I really like a lot of these products you sell but what keeps me from purchasing anything is cost of shipping & on some items Customs duty.

Anyone know if this would void the Kubota warranty?

@jpjp3873

Жыл бұрын

😂I can see it now! My engine blew up but they won’t honor the warranty because I drilled some holes in my bucket!😂. I wouldn’t put it past them!

@haydendrumright6920

Жыл бұрын

@@jpjp3873😂haha

Nice, but I can’t justify the price

What about 1023

@jufabworkscustomtractoracc6102

Жыл бұрын

If you are referring to the John Deere 1023e, yes we have several products that will work with the 1023e.

Need Mahindra

Owning a Yanmar is like trying to find left handed rifles😢 So this guy doesn’t make his product. Yeah 👋🏻

I would be interested for the side reinforcements that could just be bolted on as long as they don't interfere with tooth bars on the bottom. For example i have the Bxpanded parana tooth bar. I just bought the workmaster and taskmaster and love the product. Thanks for having Jeff on the channel.