I love watching Kite Army, thank you for your hard work Andrew!

@Kitearmy

10 ай бұрын

Thanks mate - what do you think of the new test?

Great application for the car. I am tempted to try this on my kitchen floor. It’s like a giant hair dryer. Thanks Kite Army

@Kitearmy

10 ай бұрын

I should do a blow dryer test :)

This video inspired me (and my wife) to wash our cars on this beautiful day and to my amazement my leaf blower did a great job drying the car! It's funny that I never thought to use it for that purpose before watching this video. I didn't use an Ego which I know would have dried the car much faster but hopefully in the future I will have all Ego tools for my yard and car.Thank you for this awesome video!

@Kitearmy

10 ай бұрын

Amen brotha - I feel inspired by your comment

@Carlos.Rivera

10 ай бұрын

If you ceramic coat your car, will be even more fun

@Kitearmy

10 ай бұрын

@@Carlos.Rivera I coated mine with seagull poop :)

awesome review, thanks for making this

@Kitearmy

7 ай бұрын

Glad you liked it :)

I got a Worx corded blower for $60. It puts out 600CFM and found a stubby nozzle for it on Amazon for $30, and then paid $10 for a 50 ft extension cord. That's just $100 and it punches more air than most of the cordless ones in the test. I wash my car right in front of my garage so the cord part just isn't an issue for me since I don't have leaves either. That Ego set up is awesome, green and all Doom Eternal BFG 9000 looking, but I'll see how this Worx does first for 25% of the cost all in. Great video!

@alexm3551

3 ай бұрын

Link to the machine

@snorlaxTACO

2 күн бұрын

Link man!

Missing the Greenworks 80v 170mph 730cfm. 😁 Trying to find the stubby nozzle for my Greenworks. It has been solid for me for almost 2 years now. I get you can't possibly test every model though! Great video

Thank you for taking the time to film & upload these videos. I've watched all your reviews on the blowers. Which in your opinion is best? Cheers

@Kitearmy

5 ай бұрын

Make sure you check out the EGO 765 - on the $$ side, but a beast

If you're comparing 56V Ego, a 40V Ryobi, and Milwaukee's Fuel line (highest tier) blower, why would you not use Makita's 40V XGT model or at the very least the 2x18V model to make it a fair comparison? The 40V Makita leaf blower is a beast.

@Kitearmy

10 ай бұрын

I did test that blower - kzread.info/dash/bejne/a6t-z9x7k7KcZNY.html

One problem we are working on is gravel on bike lanes and bike/ped side paths along roadways. It would be great if you could provide some info on possible use of blowers for this type of “sweeping” use, as well as any specialized nozzles, remote controls, etc. that might be of assistance in such use.

@Kitearmy

10 ай бұрын

It would be great for that

I already knew ego won to watch this

@Kitearmy

3 ай бұрын

They are the best

I would consider purchasing the stubby nozzle if it came with a flat-end attachment. I have such an attachment on my Worx and it moves water better as it hits more surface area. The only drawback is that the Worx is a little less powered. Maybe consider a flat nozzle and see how much better it will move water on a car's surface.

@Kite Army Cool tool,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺

Can you share the link of exact EGO blower you review in this video please?

U don’t need stubby or anything. Just take off the tube. Works the same

@Kitearmy

10 ай бұрын

True - but I like that you have the rubber protection on the end

@ometofu

10 ай бұрын

@@Kitearmy i just made you multimillionaire. “Blower ring” 5$ and u will sell millions of them

@kc0lif

10 ай бұрын

not

@ometofu

10 ай бұрын

@@kc0lif many test it. the rubber ring is a legit. but no other advantage

@drumbum7999

5 ай бұрын

It’s a 3d printed piece of crap. There’s free files online you can have 3d printed for way cheaper.

The stubby nozzles aren't even needed if you have a ceramic coating with good hydrophobics. Just take the factory nozzle off and use it that way. The stubby nozzles enhanced air speed will come in handy for vehicles that aren't coated though.

@Kitearmy

10 ай бұрын

Good point!

@brenthill5596

10 ай бұрын

@@Kitearmy I use the old 1st gen EGO 480 cfm blower at half throttle with no nozzle and the water almost jumps off my paint. That is with 2 coats of ceramic coating though.

Love the vids man! Wish the nozzles were all the same distance away from the fabric. Love me some EGO, but it looks like its nozzle was the closest

@Kitearmy

3 ай бұрын

I think it is the angle - it is the tallest in the bunch. I can run the test with the EGO the farthest back and it will still win

@tier1detailing

3 ай бұрын

@@Kitearmy good to know!

@Kitearmy

3 ай бұрын

I'm very particular about that because I don't want to effect the outcome @@tier1detailing

Would using a blower to blow sand and dust from a car (without washing the car) damage it’s paint? As I live in a desert like area where sand and dust accumulate over cars all the time.

Hey what’s the song in the intro

I believe that is the Ryobi 600cfm not the 730cfm because of the black rear the 730cfm has black with Ryobi green

Happy New Year send me one of those blowers please (any of the egos) 🙏 thank you

Links please for the actual blowers, not just the stubby nozzles.

I’m still waiting for the car drying competition

@Kitearmy

10 ай бұрын

So hard to compare when one is dry - to subjective!

Do you have a snub nose for Greenworks?

Do any have a filter to prevent blowing dirt particles on your paint?

@jodiewhittaker5777

4 күн бұрын

Exactly. Why wash in the first place.

I wish they made them half the size but compariable cfm and mph.

@Kitearmy

4 ай бұрын

one day

Seems you used all expensive blowers here and I have a WORX blower which I want or hope to find a stubby nozzle for......

@Kitearmy

4 ай бұрын

Yes - I was testing for the best blower to dry a car

You tested Ego and Ryobi's top-of-the-line blower, but not Milwaukee's. Why?

@Pedroluvslupe

10 ай бұрын

Because the Milwaukee is trash. Period

@Kitearmy

10 ай бұрын

Do you mean the $500 - well that is why

I was wondering what was going on across the street!

@Kitearmy

10 ай бұрын

a whole bunch of rukus

Victa 82v. 🎉

Try the Atlas for only $80 it’s much better then my Milwaukee and at $80 for the tool in a no brainier

@Kitearmy

Ай бұрын

what about battery and charger? are they sold separately

Been using my eblower for years to dry my car/bike/snow blowing.. You dont need the stubby nose as I've never hit my car or bike with the stock tube. Waste of money.

@Kitearmy

10 ай бұрын

for sure - I used to say that too - now I'm using one

Selam Türkiye iletişime gecebilirmiyiz

None of those are car blowers. The air is not filtered so you throw dust back on the car.

@Kitearmy

3 күн бұрын

not a problem here - our air is full of pollen. Trust me a filtered car dryer would only help for about 1 minute

Was that it no more test?

@Kitearmy

10 ай бұрын

Do you want to see it dry - there you have it - you know which one drys the best - what exactly were you looking for?

@Pedroluvslupe

10 ай бұрын

@@Kitearmy dry a car, not a cloth, people don’t dry clothes. That way I use it on my car and dries really good I just want you to have a great video I know myself the eagle is the best even that it doesn’t perform what it was marked for, after a couple minutes, it lose power on the CFM and the mph

@Kitearmy

10 ай бұрын

@@Pedroluvslupe no need to watch a video if you know the Eagle is the best

you forgot tube piece.😮

@Kitearmy

10 ай бұрын

hmmm

Not a very good setup for testing!

You could've at least used them on a car. Disliked.

@Kitearmy

7 ай бұрын

A like back to you - for such a wonderful comment

This video deserves more views

@Kitearmy

10 ай бұрын

Right!!!