Thanks for the info. Good video!

Great info! Thanks.

Thank you!

helped a lot

Thank you for the video. I see this glue recommended a lot and now I understand why. It looks much easier to use than superglue. Are there similar glues that u don't have to order from China? It looks like regular silicon glue.

Help! I need a glue to apply my replacement back glass of iphone x and the only glue available is e6000. Is it safe and okay? Just wanted to make sure. I’m having a hard time finding b6000 or b7000

@yochillll2672

3 жыл бұрын

How did it work

@kingpanguan

3 жыл бұрын

they are all fine except b5000

@sunnySRT7

3 жыл бұрын

Can i use it for sticking volume and power keys?

Awesome! Thank you! :-)

I did not realize you have to let B-6000 cure for over 24 hours in fact it says online 48 hours, my screens kept coming away from the phone frame so read up on it, I put the glue on the frame let it sit a minute or so then place a weight on the screen (not too heavy) then let it cure.

@duaneafields

3 жыл бұрын

four rubber bands, two horizontally and two vertical is all you need. more rubber bands if you wish. keep them on the phone as long as the glue takes.

@twizz420

2 жыл бұрын

@@duaneafields Spring clamps work the best. Especially the ones with little suction cups on the jaws. They're the best for phones that have a rounded back like the Sony XZ2 for example

can i use b-6000 or b-7000 for power button repair?on huawei phone

Is it better to use clear or dark glue

hi , can the b-7000 glue be used to atach lcd's to digitizers ? is thx !

@Itjungles

4 жыл бұрын

Yes. It's the same. But only for repair When the edge pops up.

@kikilafrite09

4 жыл бұрын

@@Itjungles ok thx

What glue should i use for a glass back cover?

@F80__Los

2 жыл бұрын

B700

Can this glue be heated in order to remove the lcd again?

Do you have to wait for some time after applying it before putting the screen on it?

@szekelymihai

4 жыл бұрын

Did you get an answer for your question? I'm also curios on this subject.

@FrozenMetroid

4 жыл бұрын

A couple of minutes

@rafaquino8281

4 жыл бұрын

no because its a silicon adhesive so once you put the glue to the sides of ur phone then immediately put the screen and apply some pressure

@joziksk4323

4 жыл бұрын

24-48hours

@Allbbrz

3 жыл бұрын

No you dont. It is not a "contact glue". If you wait, it will begin to cure, so, carefully apply and put the parts together. I usually put the phone between a couple books and put some weight on top and leave overnight. If your phone is in a tight case, that could work too.

Is b6000 the same as b_7000

Can i use dendorite

Finally, great explaination and thank you so very much

@johnmooreduclayna2111

4 жыл бұрын

HI DOES THE LEPAGE GLUE WILL BE ALSO GOOD TO FIX NY BACK GLASS I PHONE?? Pls leave a comments i need a suggestion :(

Can i use mighty bond... 😊

I recently purchase a bunch of E8000 glue without doing research. I intend to use it on a few phones and gameboy screens. What’s your opinion of E8000?

@BIGRINGMAN99

3 жыл бұрын

Still good as gold

Is b7000 okay for a camera replacement???

Can i use fevicol glue

is that shit so thick like it seems ? I have a tube of B-7000 that looks exactly like that making it hard to keep pressing the tube to squeeze the stuff out....

@twizz420

2 жыл бұрын

You're saying B7000 is really thick and hard to squeeze out of the tube? I'm trying to figure out what to use to repair my Xperia XZ2 screen, and I was recommended B7000 every time. I'm trying to figure out if B6000 is just as good or not...

Does the touch screen work after doing this

can i use T7000

What can I use as substitute? I don't have the proper resources currently

@dougbates2218

9 ай бұрын

He said super glue if you don't have the stuff in a pinch

Can i use the E6000 clear gel for this or glue de backdoor of a galaxy s10+? Ty

@QuackZack

Жыл бұрын

e6000 is actually the main brand of this. b- f- or d- or whatever letter in front is a knockoff brand.

Would the E6000 glue be suitable as well for cell phone repairs?

@Yume_Val

2 жыл бұрын

That's what I have, and it's really not great. It doesn't activate by heat and it doesn't stay well.

@QuackZack

Жыл бұрын

E6000 is the main brand.

@QuackZack

Жыл бұрын

@@Yume_Val Have you tried clamps? I wouldn't go super aggressive but enough to squish the screen or back glass in place so it doesn't pry the glue upwards.

Can i use shoe glue (adhersive) for lcd replacement??

Can I use it in back glass iPhone X

E6000 also good?

@Itjungles

4 жыл бұрын

Yes

Where can you find either of these?

@mila-evans

4 жыл бұрын

Jason Gaudet Amazon

@joziksk4323

4 жыл бұрын

Aliexpress for 1€

@Allbbrz

3 жыл бұрын

amazon of course..... but there are lots of DIY stores that also sell the stuff.

If you heated the tip of the glue,it would be easier to spread

Can You Use B-7000 Stick Back Plastic Together

@kacperk2781

5 жыл бұрын

yes u can

@voltzx1040

5 жыл бұрын

Kacper krol thanks

@frenkstih643

4 жыл бұрын

I tried with b-7000 but must say am very dissapoted as it did not glue the glass on the mobile and I did do it as instructed. Now I am looking at better alternatives.

@roscarcunanan8581

4 жыл бұрын

@@frenkstih643 youre supposed to let the b7000 cure on the frame for 3-5 minutes before attaching the glass. then clamp it down by using c clamps or press it down with big books for AT LEAST 24 hours.

How easy is to remove this glue in case you need perfor any repair later? Can you still use a heat gun? Thanks.

@dyrok

2 жыл бұрын

You got any answers yet?

@royal011

2 жыл бұрын

@@dyrok Nope!

@taylamorris

2 жыл бұрын

Following to see if anyone ever answers.

@dyrok

2 жыл бұрын

@@royal011 7 months no anwer 💀 the world is not knowledgeable. I still have to fix my galaxy watch active 💀💀💀💀

@dbc400

2 жыл бұрын

@@dyrok who knows...you would figure this KZreadr would answer....he wants views without answer ..booooo

I’m using E6000 rn

Sir can I use it for fix my battery in the smart phone

im just using regular aheasive

@where-is-my-mind.

4 жыл бұрын

you gotta be careful in rain as these types of adhesives are like silicon and provides adaquate water resistance when used properly, a regular adhesive may keep it together but water can get it.

@andrew_koala2974

4 жыл бұрын

@@where-is-my-mind. You have to be careful NOT you gotta be careful Learn Proper English and cease speaking like a peasant as it detracts from your credibility. Read one book per month to educate yourself. It is YOUR duty to do so.

@emmanuelduavis

4 жыл бұрын

@@andrew_koala2974 wtf grammar police..atleast the dude has good intentions explaining even if its not on proper grammar. This is youtube not english class

@ijibwisa2483

2 жыл бұрын

@Andrew_koala Shame on you.

Can I also use this for tempered glass?

@joziksk4323

4 жыл бұрын

No

So say you use this and find that months later you need to change the battery or something in the phone. How do you remove the glue. I mentioned that it easy to remove a few moments after applying it but what about months or years later?

@weebsupreme393

5 жыл бұрын

you heat up the glue so that it kinda melts and then remove it

@ruthannh.3188

5 жыл бұрын

@@weebsupreme393 ml o.

@kacperk2781

5 жыл бұрын

youre best of using 3m tape not the glue. From my experience the best way to take off batteries is by pouring in so isopropyl alcohol under the battery using a syringe and then heating it up . its way more effective than just a heatgun/hairdryer/heatplate.

@shawnsnow6413

4 жыл бұрын

@@kacperk2781 I've repaired dozens of phones and 3m tape never holds. That's why i'm watching this video.

@kacperk2781

4 жыл бұрын

Shawn Snow I'm referring to battery replacement not the screen, 3m holds well for backs as well as long as it's done right

You sound so cute 🥺🥺🥺❤️

Not good for Xperia or galaxy. Screen lifts. Not a strong stick to glass. Hardware store silicone works better

@inso5078

5 жыл бұрын

But you know you are supposed to use clips for a few hours to hold it in place?

@Swenser

5 жыл бұрын

@@inso5078 yes. Sure. I guess with experience you know where to put tape and glue together with heat and clamps and it gets better the more times its done.

@inso5078

5 жыл бұрын

@@Swenser First you need to clean the edges of the screen and frame with isopropyl alcohol to degrease it. Then you apply an even line of glue around the frame and hold it together using clamps so that the screen does not move when you press on it.

@Swenser

5 жыл бұрын

@@inso5078 yes clean. The only thing I can imagine it's that there a high grade 7000 and those that look the same but come from a bodgy factory. and I'm receiving the bodgy one. I wanting to start using epoxy two part for a permanent bond being careful of leakage That's the sacrifice. Good bond v . not removable. Possible leakage to lcd

@rnyll

4 жыл бұрын

I'm planning to open up an Xperia Z Ultra cause the power button doesn't work. Looking for ways to fix it and opening it is the first step. Putting it back together though, would you recommend the B-7000? 🤔