BERETTA CHEETAH // Field strip the Beretta 84fs Cheetah or Beretta 85fs Cheetah and Beretta 81
Did you get a Beretta that looks like the 92 or M9 but it is just a little smaller and in 380 or 32? You purchased a Beretta 80 Series! This video features a Beretta 85 but the field strip is the same across all 80 series (84 and 81).
In this video, I walk you through the Beretta 84 and 85 cheetah takedown field strip process. Although I use a Beretta 85 in this video, the process is the same for a Beretta 84 field strip.
There are only a few differences between the few models of the Cheetah (Beretta 81, Beretta 84 and the Beretta 85). The Beretta 82 is identical to the Beretta 84 except that it is chambered in .32 ACP instead of .380 ACP. While the Beretta 85 is similar to the Beretta 84 in the fact that it is chambered in .380 ACP, it has a single stack magazine making it slightly thinner. Those with smaller hands and/or doing concealed carry typically choose the Beretta 84 over the Beretta 84.
The Beretta 84fs and Beretta 85fs Cheetah are great pistols to own and shoot.
Don't forget to watch my other Beretta content on the Beretta model 84 and 85 pistols! They are conveniently located in the following playlist
kzread.info/head/PLLlRzRtKJRqOcrh0odvvubaSfuJ2p1179
#Beretta #84FS #85FS #cheetah
Video Index:
Intro - 0:00
What is the difference between the Beretta 84 and Beretta 85 - 00:14
How to lock the slide back to the rear on a Beretta 84 or Beretta 85 - 00:30
How to remove the slide on the Beretta 84 or Beretta 85 - 00:35
How to remove the barrel on the Beretta 84 or Beretta 85 - 00:58
How to install the barrel on the Beretta 84 or Beretta 85 - 01:37
How to install the slide on the Beretta 84 or Beretta 85 - 02:37
How to safely decock the hammer on the Beretta 84 or Beretta 85 - 03:26
#beretta #cheetah #beretta84 #beretta85 #theroguebanshee
-------
How to support us:
Shopping our Affiliate links and banners on
www.trb.fyi
A full list of our Affiliate partners (support us for free by clicking these links before you shop)
linktr.ee/theroguebanshee or bit.ly/3cLTAi1
Support this channel on Patreon
bit.ly/3cQQYzo
Support this channel on Subscribestar
bit.ly/354ckq6
-------
-------
Social Media
Website
www.trb.fyi
Instagram
theroguebanshee
Facebook
TheRogueBanshee
-------
-------
Gear that I run
Computer
www.amazon.com/shop/theroguebanshee?listId=28W3UO8YXBKY3
Studio
www.amazon.com/shop/theroguebanshee?listId=2LISYK2A6DTTC
Camera and Mic
www.amazon.com/shop/theroguebanshee?listId=24PJH5W612YLL
My 3d Printer setup
www.amazon.com/shop/theroguebanshee?listId=1UL6S39TFWX53
-------
-------
Credits
The Rogue Banshee Original Content
Credit: Jason Schaller
jschaller@trb.fyi
-------
The products (videos, articles, pictures. etc.) available through The Rogue Banshee (including gear, tools, products, etc. that are featured, seen or used) are for informational and entertainment purposes only. All activities are completed in accordance with all local, state and federal regulations, as well as in a safe manner in approved locations with professional supervision.
Affiliate Disclaimer: In accordance with the rules and regulations set by the FTC, The Rogue Banshee is an affiliate marketer for several companies.
Пікірлер: 51
Let me know your thoughts on larger frame .380 pistols in the comments below.
This is probably one of the best, if not the best, field strip videos I have ever seen. Camerawork is clear and well lit, verbiage is precise and to the point with no extraneous B/S. just the facts! Perfect example that others should follow!
I mean no disrespect here. It has been I think 20 years since I purchased this weapon. I forgot how to strips it. This video spoke to me like a 5 year old. Thank you. Thorough!!!!!
One of the most beautifully designed handgun in the world.
When you’re putting the slide on, another way to get past the “hangup” is to push on the muzzle slightly as you’re flipping the lever back into place. Or you can forcefully rack it all the way back, as he showed. But it won’t seat correctly unless you rack it with some gusto. Regardless, both approaches work.
@TheRogueBanshee
Жыл бұрын
I tend to go with the more forceful approach on a lot of things :)
Thanks Rogue Banshee for this video. I just bought a Tisas Fatih, which is an 84 clone. I had some of the same issues with reassembly, thinking something was wrong with my gun. I think the rotating cam face of the takedown pin is the culprit. It’s a tight fit between that pin and the underside of the barrel assembly. Takes a few takedowns to loosen the tolerances up.
Nice instructional field strip video. It's one thing we can do without ammo.
@TheRogueBanshee
3 жыл бұрын
Thanks for watching brother. Yea... this is totally one of the few things we can do these days without spending a bunch of money.
@WheeledandWellArmed
3 жыл бұрын
@@TheRogueBanshee Yesterday I compared two pistols and shot 20 rounds total, 6 to 9 months ago I would have fired 50 to 500 each. Today I released a second video field stripping both and comparing the two. You did a better job teaching as you went along.
You make amazing tutorials. Thank you!
@TheRogueBanshee
2 жыл бұрын
Glad you like them!
Could have used this last week. Thanks. The guide rod was tricky.
Thank you. Excellent. Concise and thorough.
@TheRogueBanshee
Жыл бұрын
Glad you enjoyed it! Thanks for watching.
Another great video, Thank you
Good job… helped me
PERFECT , EVER AN EVER!
Thanks. Love everything about my bb85 except the sight picture with that funky one dot rear sight. I painted the white front sight dot green instead of white so I just put the green dot on the white dot but the way I received it was with two white dots and I had a hard time with that. Awesome pistol though.
Thank you very much sir, the assembly can be very difficult, now i understand 👍
@TheRogueBanshee
Ай бұрын
You are welcome
Good video. Clear instructions. Is this a BLOWBACK operated pistol ?
Great camera work
@TheRogueBanshee
2 ай бұрын
Glad you liked it
Good!
Good vid. Great production. Crisp and clear. Cool editing too. He choice to slo-mo for some steps was Thanks! #withauthority
@TheRogueBanshee
3 жыл бұрын
Thanks for watching brother!
Thank you so much for this I have now Idea why but I feel like my beretta 85 is so frustrating to put back together compared to any other gun I own
@TheRogueBanshee
Жыл бұрын
The Cheetah is a challenging gun to work on. Glad you liked the video and thanks for watching.
Thanks a ton man!!I 👍 l just picked up the Beretta 84 f that I won on a GunBroker auction.
YOUR THE 👌 BEST 💯%
@TheRogueBanshee
Жыл бұрын
Thanks for the support!
Always wanted a Cheetah. Would be best friends with my 92 👍🤣
@TheRogueBanshee
3 жыл бұрын
Funny. I put a picture up on IG with the Cheetah and the 92. Thanks for watching!
we love our 84s enjoy the night
@TheRogueBanshee
Жыл бұрын
I got to play with the NEW 84 at SHOT Show. They are pretty cool and Beretta added a third position to the safety. You now have a cocked and locked position. The spring on the new ones are not quite as tight as on the older ones. Thanks for watching!
@mrsmel269
Жыл бұрын
nice np brother enjoy the rest of the day Rogue
@TheRogueBanshee
Жыл бұрын
@@mrsmel269 enjoy your day too. Stay warm in that storm
@mrsmel269
Жыл бұрын
thank you brother feeding the burner and loving that im not working ;-)
Does anyone have a hard time taking off the slide? I’ve recently bought a 85bb and the slide seems to be stuck it won’t go back into place or come off
Would the 84BB model be the same as this or are there significant internal differences?
@TheRogueBanshee
5 ай бұрын
There are some minor differences between the BB, F and FS versions.
Just got a 84 BB, man the re oil spring is hard? Tips, no jokes please. I am already unhappy as Palmetto’s idea of excellent condition is way off. Internally the police trade in was horribly carbon up, the barrel too, the slide intervals were full of carbon. Need advice on how to super clean it.
@TheRogueBanshee
Ай бұрын
Funny, I saw that PSA sale and was wondering how good they were. When I was an FFL, I used to but surplus Cheetah's and rehab them. They were in awful shape. I will say, police trades, be it Beretta, Glock, or any other firearm, were always full of carbon and took a lot of cleaning to make them decent. It is a lot of soaking and scrubbing. Ultimately, I sandblasted them since I was doing Cerakote jobs. Have you tried ultrasonic cleaning? I use Simple Green for a solution. But beware, you will still need to do a lot of scrubbing. Brake cleaner or Gun Scrubber is also good, but can be dangerous, make sure you do it outside with proper PPE.
What do you think about a larger frame .380? I would like to hear your thoughts down here in the comments.
Price Beretta 84.???
@TheRogueBanshee
2 жыл бұрын
They are WAY over priced. I am not sure why though. They are also not common to find either so people get what they ask for them.
@gilcastillo8591
Жыл бұрын
I paid 400 for mine .they can go for more Very good condition ,AT gun shop
@proudbirther1998
Жыл бұрын
@@gilcastillo8591 400??? No way! You must have bought the TAURAS 84.
Los letreros no dejan ver No sirve de nada este video
@TheRogueBanshee
9 ай бұрын
it might be blocked in your area by KZread