Thanks Tim, paused your video about 20 seconds in and zipped over to MT and picked one up! Absolutely beautiful rig you got there.

@Timcanniff311

2 ай бұрын

Thanks bud, I think I’ve bought everything thing that exists for it besides the CROM mount, it’s as tactical as it’s gonna get!

You have the A300 “ultimate” patrol!!! Literally daydreamed of that exact setup, but you beat me to the punch!

@Timcanniff311

3 ай бұрын

Sorry bud and now I got the pistol grip stock on it, I made a video yesterday with the Mesa tactical stock, but you’ll get there, I bought a part every paycheck, it’s been about 9 months since I bought it , but now it’s finally done

Just watched your previous A300 stock install, looks like you added over $1K (?) in goodies (GG&G) to make look awesome, congrats. Was this the only stock upgrade you considered?

@Timcanniff311

11 күн бұрын

@@donculver8671 this is the only aftermarket stock available for the a300 as of right now chisel machining is coming out with one soon, yes is this video I believe I had the Gg&g handguard and heatshield that was 300, the tube cover was 75, the Aridus follower which you can’t see was 60, the Holosun was 350, the stock was 130, charging handle was 40, handstop was 25, buttstock shell holder was 40, flashlight was 120, so ya over a 1000$, but obviously not everyone needs all these things, but the tube cover is a big upgrade, and the stock I like pistol grips so I chose this stock

@Timcanniff311

11 күн бұрын

Oh ya and the pro lifter that was 150$

exactly the video i was looking for! I couldn't find info anywhere. Have you fired it with the stock on yet?

@Timcanniff311

3 ай бұрын

I have not I just put it on yesterday and I knew there was not a video on KZread yet, guess I’m the first, I’m assuming it will perform just as well on the 300 as the 1301, this stock is just a 1301 stock with a different sling washer in it

@baowzer6430

3 ай бұрын

@@Timcanniff311 Let us know how it goes when you shoot it please

@Timcanniff311

3 ай бұрын

@@baowzer6430 might be awhile a guy at my job just quit I’ve been working 7 days a week and I got 4 kids so not much time to shoot but if I do I’ll send a message

Good lookn shottie u have there sir 👍🏿👍🏿

@Timcanniff311

2 ай бұрын

Thanks hero

It looks awesome

@Timcanniff311

2 ай бұрын

Thanks bud

Would you say this stock is worth it for the price? Does it change the felt recoil now that you have a pistol grip with stock combo vs the traditional stock? And if I do get this, should I get the riser? Can you do some range footage with this set up? I want to see if the recoil different is worth it

@Timcanniff311

2 ай бұрын

I think the pistol grip is better for heavier loads and easier with the push pull method for sure, I didn’t need the riser with the GG&G RMR mount and Holoson 507c, maybe if you put a red dot on the pic rail you would need the riser

Man we need an install video. Some people been complaining about the stock rotating after shooting it. Don’t know if is an error on the installer or the Mesa Stock just not meant for the a300. Still on the fence in getting one.

@Timcanniff311

2 ай бұрын

I haven’t shot it with the stock on it yet so I’ll have to wait and see but I tightened the hell out of it it feels sturdy enough but time will tell, I could record me putting it back on

@Timcanniff311

2 ай бұрын

Made an install video for ya

@jorgenoneya5382

2 ай бұрын

@@Timcanniff311Thank you I believe you are the first one to make one. Thank you.

@Timcanniff311

2 ай бұрын

@@jorgenoneya5382 it’s possible I haven’t even seen another video with the stock on it like mine

How much weight did this add

@Timcanniff311

2 ай бұрын

With the shells I’d say another pound, the shotgun is 7 pounds stock, so with all my modifications and fully loaded it’s probably in the 11-12 pound range

Wait for range test💪

@Timcanniff311

2 ай бұрын

Ya hopefully soon I got lots of kids and work a lot do t shoot too much

@user-wm6lc3nm8v

2 ай бұрын

@@Timcanniff311 Can you share pistol grip purchase links

@Timcanniff311

2 ай бұрын

@@user-wm6lc3nm8v I don’t know how to link stuff I’m not a computer guy, but it’s from Mesa tactical, it’s called the Urbino stock, and it can be found under the beretta 1301 stock link

How is the recoil on it now with the MT butt stock and limb saver? I just got one and debating if I should get the kick off system or this.

@Timcanniff311

2 ай бұрын

The kick off system is a spring loaded buttstock system if I’m not mistaken, I have not shot it with this stock on it yet, but I did have a limbsaver pad on the original beretta stock, it was very nice but slugs and heavy brass shells I could still feel, I do not have any experience with the kick off system so I can’t compare the two

Was it hard to install?

@Timcanniff311

3 ай бұрын

No super easy, took off buttpad off of beretta stock take off 1/2” nut, grab mess tactical stock, the a300 has about a 10” rod attached to receiver so you feed that through the sling mount if you want to use it, than tighten the original beretta nut back onto the urbino stock with the supplied washers it took me 5 minutes

@Ohyouknowbro

Ай бұрын

​@Timcanniff311 have you shot it with that stock on it yet? If so how was it in comparison? Thanks for the info on all this bro you're taking the journey with this shotgun and alot of us dudes are taking notes lol

@Timcanniff311

Ай бұрын

@@Ohyouknowbro yes I have a short video with shooting it, actually the video I have is where the Zhukov handguard broke, my stock didn’t rotate at all like others have mentioned

I just installed mine and was disappointed that there are no anti rotation pins.. i feel like if i dropped this the grip could potentially rotate. What are your thoights?

@Timcanniff311

2 ай бұрын

It does have the oval shaped washer towards the nut mounting in the back but I haven’t had any rotation issues yet

❤what is the difference between a300 ultima and rhe ultima parrol

@Timcanniff311

Ай бұрын

The patrol is a tactical version of the Ultima

Did you have to buy an adapter separately or did it come with the buttstock?

@Timcanniff311

3 ай бұрын

No adaptor needed the 1301 and the a300 receiver have the same profile on the back so it fits very nice, the stock comes with 2 sling plates for the middle of the stock if you choose to use them one with a big hole for the 300 and one for the 1301, the install was 5 minutes

@stacymiller2733

3 ай бұрын

Guess this will be my next purchase … good info thanks

@Timcanniff311

3 ай бұрын

@@stacymiller2733 no problem, I just installed it today haven’t shot it yet, it took almost 2 weeks to get to Minnesota from Nevada, so hopefully you’ll get yours faster, oh I forgot to mention in my video that with the Holoson optic there is no need to get the urbino stock with the riser unless you mount an optic on the pic rail , the way I have my setup with no riser and holoson with the low RMR mount works out well

I thought it wasn't possible to change the stock on the A300UP because of the recoil system that's contained within factory stock. Too bad you didn't take shots of the installation process.

@Timcanniff311

2 ай бұрын

The urbino stock is set up for the 300, the mossberg 930 has the same type of recoil system, so Mesa tactical just tweaked it a bit for the 300, it was extremely simple to install, remove buttpad off of the beretta stock remove bolt, reverse process with the urbino stock , it took me about 4 minutes, so if you do order it from Mesa tactical it’s under the 1301 beretta link

@f34dave

2 ай бұрын

I thought the same thing until I came across Tim's video just now. Absolutely bad ass!

@markn4526

2 ай бұрын

@@f34dave I recall watching a video with a representative from Beretta saying that because of the recoil system.

@markn4526

2 ай бұрын

One thing I noticed about this pistol grip stock and now even the pistol grip stock of the 1301/1301 Mod.2 is the pretty extreme angle of the pistol grip. It's way more extreme than that of the Glock pistols compared to the "standard 1911" grip angle and I think a little more angled than the pistol grip stock of the Benelli M's. Is it uncomfortable to shoot?

@Timcanniff311

2 ай бұрын

@@markn4526 the grip on this stock is modeled after the benelli grip they can actually interchange with each other, feels very good in the hand, doesn’t feel unnatural to hold with the angle of the grip, I have not shot the gun with this stock yet, but this stock is the only option besides the stock that came with the A300UP

It's tacticool for sure

@Timcanniff311

2 ай бұрын

I have a few traditional shotguns so I want to go all out tactical with this one, it’s as tactical as it’s gonna get!

I don't care for the pistol grip stock.

@Pavia1525

2 ай бұрын

The pistol grip stock doesn’t care for you, either.