Beretta 1301 User Guide: How it works, Loading & Unloading (Part 2)
Спорт
In this, part 2 of my Beretta 1301 User Guide, I will discuss how it works, Loading & Unloading.
Firstly I will prove my gun clear and talk a bit about the Beretta 1301 Comp Pro. Then I will go through the mechanics of the shotgun. Finally I will run though loading, both conventional and ghost load, and unloading.
It helps the operator to manipulate and operate the shotgun if you know how the shotgun works.
This video should help beginners and seasoned shooters alike.
The Beretta 1301 Comp Pro is capable of firing a broad range of ammunition. The combination of the rotating head on the breech bolt, and the Blink gas system reduces felt recoil. The recoil force is dispersed directly in line with the shooter's shoulder and lends additional stability to the shotgun when firing subsequent rounds.
Before loading the firearm, it is a good idea to practice the following handling procedures without the use of ammunition.
I hope you found this video useful. Please share this video with your shooting buddies and subscribe to my channel so you don’t miss out.
Always leave a comment and a thumbs-up 👍🏼 on the video, it really helps me out a lot. Please share a video with a friend 🙏.
SUPPORT
If you like my content and want to help me create even better content, you can support my channel, and gain access to Patreon only content, / joncresswelluk . You can also support me through PAYPAL: paypal.me/joncresswelluk/
New videos are released every week! Click the following link to see my channel / @joncresswelluk
Chapters
00:00 Intro
00:30 Safety
01:54 About the Beretta 1301
03:19 Ammunition
04:11 Magazine Capacity
04:35 How the Beretta 1301 works
06:45 Loading
08:33 Ghost Load
09:07 Unloading
FOLLOW ME FOR EXTRA CONTENT
INSTAGRAM - / joncresswelluk
FACEBOOK - / joncresswelluk
KZread - / joncresswelluk
Find out more about Team Jackal at: www.jackalfirearms.co.uk/page...
Are you a KZread creator? Sign up to TubeBuddy Pro (www.tubebuddy.com/joncresswelluk) - TubeBuddy integrates directly into KZread on your laptop (and has a mobile app) to help you run your channel, add tags and health check your posts.
Пікірлер: 288
Many many thanks Jon! Short story- a family friend who is a competitive clays shooter needed to store his shotguns away from his home - I never did ask why (plausible deniability 😉) but if locking them up in my safe made a situation safer I was glad to be of help. That’s when it started … Now, I am a loyal and dedicated husband, but there’s very little a man can do to resist when left all alone with a sexy Italian lady. She was a 686 silver pigeon Vittoria, and I was smitten! Lol. Thats when the love affair started! The craftsmanship, the balance. Dare I say… the ease of which she was mounted was like nothing I experienced before! That’s when I made a promise to myself that one day I would have a Beretta of my own! Fast forward to yesterday afternoon. After 6 days, My NICS check cleared the NJSP and my 1301 tactical was all ready to come home with me from the FFL. Now she sits in that safe-the same spot as that silver pigeon - patiently waiting the first trip to the range! Unfortunately work and the US holiday weekend make getting to the range near impossible for the near future. That’s where you come in. Your videos really help scratch that itch until rangeday comes. I’ve been devouring any and all 1301 content on KZread and let me tell ya, yours it at the top of the list! Really well done. Beyond helpful and informative. Something I would expect Beretta would produce for themselves! So thank you kindly. You have a new sub!
@JonCresswellUk
2 жыл бұрын
Wow 🤩 thank you for sharing your story! I mean, who wouldn’t fall in love with a sexy Italian beretta 😍 I’m sure your 1301 won’t disappoint you. It’s a dream to shoot and being gas fed it soaks up the felt recoil so you can have a fun day shooting without having a sore shoulder afterwards 😎 Recently I feel I haven’t spent much time behind my shotgun, but it’s had a few outings to the local clay pigeon shooting ground 😏 Glad you are enjoying the videos and thanks for the sub 👍👍
@JonCresswellUk
2 жыл бұрын
Wow 🤩 thank you for sharing your story! I mean, who wouldn’t fall in love with a sexy Italian beretta 😍 I’m sure your 1301 won’t disappoint you. It’s a dream to shoot and being gas fed it soaks up the felt recoil so you can have a fun day shooting without having a sore shoulder afterwards 😎 Recently I feel I haven’t spent much time behind my shotgun, but it’s had a few outings to the local clay pigeon shooting ground 😏 Glad you are enjoying the videos and thanks for the sub 👍👍
I never thought I would be learning about guns from a limey in a million years, thank you sir.
@JonCresswellUk
Жыл бұрын
😂🇬🇧
Thanks for the video and explaining in detail the 1301 system and how it works
@JonCresswellUk
Ай бұрын
Glad to help
Very good, clear, no fuss, perfect presentation
@JonCresswellUk
4 ай бұрын
Thank you 🙏
Best general shotgun safety tutorial I've seen. Thank you!
@JonCresswellUk
2 жыл бұрын
Thanks Wade! 👍👍
You did an excellent job covering the 1301.
@JonCresswellUk
9 ай бұрын
Thank you!
This is exactly what I was looking for
@JonCresswellUk
3 ай бұрын
🤩 great! Glad you found it
Thanks for the tips - I never would have guessed to pull up on the bolt release button to unload. I just picked up my new Comp Pro 21" Barrel (no extension tube here in the US, and I had to remove the restrictor rod just to make it a 4+1). I haven't fired it yet, but I already love it.
@JonCresswellUk
2 жыл бұрын
Yes it’s a bit odd how you have to pull on the bolt release, but most of the time I empty it into targets 😉 It’s a great shotgun! The gas system and dampening stock make it something you can shoot all day and not get a sore shoulder 👍
Is there anything I haven’t covered in part 1 or part 2 that you would like me to include in the next Beretta 1301 video?
Thank you so much for you concise clear and step by step direction. I just recently picked up an A300, similar to the 1301 from what I've read. As this is my first semi-auto unloading and cycling was always odd to me, and a lot of videos show different ways to do it. I love how you bring the Range home in this video including comms with the RO and everything. Thanks a ton!
Jon, for many years I've lusted over the TX4, then the 1301 (I'm a PX4/CX4 kinda guy), but just couldn't quite pull the trigger, though the temptation was strong. Then came SHOT Show 2023 and the announcement of the A300 Ultima Patrol and I was totally smitten! I started the search and 9 days ago became the proud owner of the Patrol in gray (tiger stripe just didn't do it for me). I've cleaned it twice already and am familiar with the various functions of the gun, but unloading live shells was a mystery. The manual, in true Beretta style, was totally misleading and even wrong! Your video has cleared the air and I'm now able to safely unload the magazine without issue. THANKS for your most invaluable help! You've earned a new follower, even though the 1301 hasn't entered my safe. 😁
@JonCresswellUk
Жыл бұрын
Thanks for the story and feedback! Luckily most of the new Beretta semi auto shotguns use the same receiver and blink system (or similar), so the functionality is comparable. I think I’d have gone for tiger stripe if they had it when I went to the store 🤤. The A300 ultima patrol looks great 👍 and I hope you have fun shooting it. Glad the video helped with the unloading of the magazine, as it’s not very straightforward. Thanks for subscribing! I really appreciate it. That reminds me that I need to get behind my shotgun again and take out some steels 😎
Best tutorial for the Beretta 1301 i´ve seen so far !
@JonCresswellUk
2 жыл бұрын
Wow thanks 🤩. What did you find the most useful?
@JonCresswellUk
2 жыл бұрын
Did you also see the part 1 for this guide? Link here kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html 😊
Jon, this was a *fantastic* production - an immense help in understanding my new 1301 Tactical Gen 2.
@JonCresswellUk
2 жыл бұрын
Glad you found it useful. Did you see part 1 (kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html) too? It’s a great shotgun and so much fun to shoot.
Thank you for this. I got the 1301 quite recently and it's my first automatic shotgun and very different from other guns I own. I didn't find Beretta's manual particularly clear on unloading. But your video is clear, well filmed, succinct, and well lit.
@JonCresswellUk
2 жыл бұрын
Wow thanks for the feedback 🤩👍 You’ll enjoy your 1301 it’s a great shotgun and mine hasn’t skipped a beat! Yeah the unloading bit is a bit awkward but once you get the process it’s fine.
@thisolddude
2 жыл бұрын
Totally agree with you, this Video is very helpful. Berettas Manual is not good at all for people who are new into these kind of weapons.
@JonCresswellUk
2 жыл бұрын
@@thisolddude it always helps if someone can show you around the firearm to help you get familiar with it 👍. Hope this video did that.
@thisolddude
2 жыл бұрын
@@JonCresswellUk It absolutely did it. Thank you again for it.
@JonCresswellUk
2 жыл бұрын
@@thisolddude you’re welcome ☺️
Thank you Jon, this video was extremely helpful. Just got a 1301 Tactical (7+1), my first semi-auto shotgun and there was no manual included (you can send away for one though...). The PDF manual isn't great either. Manual of arms on this is a little complicated but now I feel better after watching your video. Still need to train / practice with some dummy rounds. Thanks again.
@JonCresswellUk
Жыл бұрын
Thanks 😊 yes, they don’t really come with manuals any more. Hopefully these user guides will help as I try to go through it all step by step. Did you see the maintenance video too kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
This is my first semi-auto shotgun and my first Beretta, I can only echo what some others have already said: The Beretta manual is not very helpful while your videos are clear and extremely well done. Though I have the 7 round LE version which is a bit different than the other models, this video really helped me to understand the components and what I need to do to keep the gun functioning. I plan to watch all your other videos in the series, Thank yo so much for doing these. They have helped me immensely. (And if there's a video specific to the LE version, please let me know and I'll watch that too).
@JonCresswellUk
2 жыл бұрын
Thanks Alan 🙏 I appreciate the feedback. As far as I know the LE and the A400 versions function in exactly the same way. It’s sometimes hard to translate from the manuals, so I’m glad you found this video useful. My routine maintenance video should also help kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
Thanks for this video ! You make the process clear and concise easy to follow instructions.
@JonCresswellUk
2 жыл бұрын
Glad you liked it 🙏😎
Thank you for that excellent video!
@JonCresswellUk
Жыл бұрын
Thank you 🙏
Thanks for such a great video. I have 1301 tactical and I have watched 2 other videos that were not as clear on the unloading process and the explanation of ghost loading. Great camera work!!!!! Thanks
@JonCresswellUk
2 жыл бұрын
Thanks 😊 glad you found it useful 👍
New 1301 owner…my first shotgun. Excellent video. Very clear and easy to follow.
@JonCresswellUk
7 ай бұрын
Enjoy your new shotgun! It’s great to shoot. Thanks for watching the video!
Exceptional demonstration, thanks for this well made video!
@JonCresswellUk
2 жыл бұрын
Thanks so much Pedro T 👍👍
Excellent. I have an M2 Benelli and your presentation helped me understand it better. Thank you, sir.
@JonCresswellUk
2 жыл бұрын
Glad it helped. Benelli made a video on how their inertia system works at kzread.info/dash/bejne/dHl1lNuLc5y3kpc.html
Great, in-depth video on safely loading and unloading, inserting flag, etc. Will apply your steps when I receive my 1301 Tactical. Subscribed.
@JonCresswellUk
Жыл бұрын
Thanks zman! I’m sure you’ll enjoy shooting your 1301 tactical when it arrives. Thank you for subscribing to my channel I appreciate it.
Great video! Really good job explaining the mechanics. I liked it for ya. Good luck!
@JonCresswellUk
2 жыл бұрын
Thanks Justin 👍
thanks for the video, now i feel confident enough to try it on the range for the 1st time with my 1301 tactical
@JonCresswellUk
2 жыл бұрын
Great George, you’ll love it. Did you see part 1 too?
@georgeyin3321
2 жыл бұрын
@@JonCresswellUk heading there now
Outstanding user guide, good job.
@JonCresswellUk
2 жыл бұрын
Thanks 😊. Did you see my Beretta 1301 User Guide: Routine Maintenance - Strip, Clean, Assemble kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
Great guides on one of the best looking shotgun on the market.
@JonCresswellUk
8 ай бұрын
Thanks. I love my beretta 💙
Great video Jon, so informative! Thank you very much!
@JonCresswellUk
7 ай бұрын
Thank you for watching! I hope it helps.
LOL at 8:30 or thereabouts you violin load with such finesse and a double stack it was so clean
@JonCresswellUk
3 ай бұрын
Thanks 😊 I think 😁
Excellent video! Thank you!!!
@JonCresswellUk
2 жыл бұрын
I’m glad you liked it, thanks for watching. I also made a part 1 that may be of use too kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
Jon, excellent video for both content and production quality. Also, your attention to safety is a good lesson for anyone. Wishing you the best of the new year from across the pond!
@JonCresswellUk
6 ай бұрын
Thanks ☺️ I appreciate the feedback. Do you shoot a 1301?
More Great Tips Cheers Jon
@JonCresswellUk
2 жыл бұрын
Thanks Andy 😊👍
I like those bolt releases, I picked mine up before the pro came out. (21"comp) Thanks for the great video take care.
@JonCresswellUk
2 жыл бұрын
Thanks 😊. Enjoy your new shotgun 😎
Nice and informative video. Well done.
@JonCresswellUk
2 жыл бұрын
Thank you 😊 Спасибо
cristal clear, thks, i am going to the range to try my new 1301 comp pro, liked and subscribed
@JonCresswellUk
2 жыл бұрын
Thanks 😊. Hope you enjoy your range day 😎
This answered All my questions .
@JonCresswellUk
Жыл бұрын
Amazing thanks ☺️. I hope you enjoy shooting your beretta 😎
This is the best instructional vidéo that I have ever seen.
@JonCresswellUk
Жыл бұрын
Thank you squideye!
Tremendous help, thanks for tips
@JonCresswellUk
Жыл бұрын
You’re welcome Scott 👍👍
the 1301 is my first semi-auto shotgun. thanks for helping me understand how to load/unload
@JonCresswellUk
8 ай бұрын
You made a great choice! It’s a fun gun to shoot
@KingAndrew5000
8 ай бұрын
@@JonCresswellUk took it out in the woods for break-in yesterday. It's awesome! What ammo do you recommend for home self defense?
@JonCresswellUk
8 ай бұрын
@KingAndrew5000 glad it’s working out for you. We can’t use firearms as self defence in the UK so it’s something I’ve not considered - sorry.
Great video a huge help thank you sir
@JonCresswellUk
Жыл бұрын
You’re welcome Pete, glad you found it helpful. Did you see the other 1301 video kzread.info/dash/bejne/anaelKOLc6vQfrw.html
Thank you for the knowledge
@JonCresswellUk
Жыл бұрын
Thank you for watching 🙏
@judodavid1
Жыл бұрын
My pleasure @@JonCresswellUk
Excellent user guide
@JonCresswellUk
2 жыл бұрын
Thank you Romeo 😎
Very good videos… thank you very much 🙏🏼🙇🏻♂️🙇🏻♂️🙇🏻♂️
@JonCresswellUk
Жыл бұрын
Thank you, I’m glad you enjoyed them
Very helpful video, thank you!
@JonCresswellUk
2 жыл бұрын
Thank you 😊 what did you find most useful?
@w.harrison7277
2 жыл бұрын
@@JonCresswellUk The explanations of the basic operation, which even though I've been shooting this for 2 years and own three 1301s I actually didn't know a lot of this, such as how to unload, ghost loading, etc. You seemed to cover everything. Thanks!
@JonCresswellUk
2 жыл бұрын
@@w.harrison7277 thanks 😊 that’s good to know the operation of the rifle is something people find useful. I’m glad it helped.
Excellent video
@JonCresswellUk
2 жыл бұрын
Thanks Chris
Thank you very much you have cleared a confused mind!
@JonCresswellUk
8 ай бұрын
Glad it helped!
Great video mate, very informative.
@JonCresswellUk
2 жыл бұрын
Glad you liked it Ollie 🙂. Did you see part 1 (kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html).
@Parfashrek
2 жыл бұрын
@@JonCresswellUk watching now buddy👌🏻
@JonCresswellUk
2 жыл бұрын
@@Parfashrek great stuff 👌👍
thank you!.. world class video 10 out of 10
@JonCresswellUk
3 ай бұрын
🤩 thank you
Great explanation!
@JonCresswellUk
Жыл бұрын
Thanks Jason hope you found it useful
Thanks 4 sharing.
@JonCresswellUk
2 жыл бұрын
Thanks for watching 😎👍
Thanks so much for the video
@JonCresswellUk
2 жыл бұрын
No worries 😌
Love your Vortex shirt. Vortex makes great scopes at reasonable prices. In the USA many top, long range shooters use Vortex.
@JonCresswellUk
2 жыл бұрын
Thanks Ray. I run vortex optics on all my rifles, always have done 😎. You get a lot of scope for your money with Vortex Optics.
I watch your disassembly video every damn time.
@JonCresswellUk
2 жыл бұрын
😊 I hope that’s a good thing. Did you see part 2 I published yesterday kzread.info/dash/bejne/anaelKOLc6vQfrw.html
@jpanokealii4502
2 жыл бұрын
@@JonCresswellUk Yes I have...every damn time as well lol
@JonCresswellUk
2 жыл бұрын
@@jpanokealii4502 🤣👍
Thanks a bunch, sir. Great video
@JonCresswellUk
Жыл бұрын
Thank you for watching. USMC 😊 thank you for your service 🤝. I served in the UK Royal Marines Commandos and worked with some of you guys over the years. Semper Fi
@usmc8816
Жыл бұрын
@@JonCresswellUk Semper Fi and thank you for your service as well. You guys are some true bad asses.
@JonCresswellUk
Жыл бұрын
Thanks brother
Great and very professionnal video ❤️🙏
@JonCresswellUk
2 жыл бұрын
Thank you Robert 🙏 it’s a learning curve making and editing the videos but I’m trying new things to up my game.
@robertmercure1740
2 жыл бұрын
@@JonCresswellUk 👍
Appreciate this tutorial! Just picked up a 1301 tactical and needed this!
@JonCresswellUk
Жыл бұрын
The 1301 tactical is a lovely shotgun! Enjoy
@soldier09r
Жыл бұрын
@@JonCresswellUk you've helped me more than you know, brother!! Watched this again for clarification and you explain things so clear and concise!!!
@JonCresswellUk
Жыл бұрын
@@soldier09r glad you’re finding the video helpful. Have you seen the maintenance video too? Beretta 1301 User Guide: Routine Maintenance - Strip, Clean, Assemble kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
@soldier09r
Жыл бұрын
@@JonCresswellUk I have not but definitely need it! I've been practicing what you showed here with reloading. This one you recommended will definitely be needed after this weekend! I need to sling some rounds down range before I upgrade it to see the difference. Appreciate the link to that!!!
@JonCresswellUk
Жыл бұрын
That’s great! Always worth practicing before you get to the range for the first time with it. Being ex-military I’m obsessed with putting it away clean (kind of drilled into me…). Give the barrel a quick clean and lightly oil on the working parts (never oil the gas parts) before you hit the range.
Thank you so much! This is my first shotgun and I Was Just looking for all those instructions! Have a great shooting season!
@JonCresswellUk
2 жыл бұрын
Congratulations on getting an awesome shotgun 👍. Did you see my other video “Beretta 1301 User Guide: Routine Maintenance - Strip, Clean, Assemble” kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
Good video, bro!
@JonCresswellUk
Жыл бұрын
Thanks so much 👍 what was your number 1 take away from the video?
Hi Jon, just a little extra info...to ghost load is to add an extra round to your load out. The fastest way you do that and put one in the chamber with the newer 1301 comp is you load the tube .... rack one into the chamber then load another in the tube....after that take another round and pull back a little on the bolt then push that round down onto the lifter while pressing the latch in to allow the lifter to move down....then place another round in the chamber.
@JonCresswellUk
2 жыл бұрын
Ah nice 👍 thanks 😊. Always good to have an extra shot if you can squeeze one in 😃
@maximusmock
2 жыл бұрын
I have found you can ghost load with one in the chamber. Is this safe?
@JonCresswellUk
2 жыл бұрын
@@maximusmock it’s as safe as a loaded shotgun could be…always have the safety applied and keep pointing in a safe direction. I wouldn’t leave one in the chamber myself. Ghost loading an extra cartridge puts one in the chamber whilst you load another onto the lifter. I know this can be done, but it is a bit awkward to do and I know on some shotguns it may cause the second cartridge to jam. There may be questions about legality if you are in the uk and only have a shotgun licence, as the licence limits you to 2 in the mag and one in the chamber. There may also be some hunting conditions in the US where this is also either illegal or frowned upon. We can’t use shotguns for home defence in the uk, however, if your country allows it I would just get a mag extension instead of ghost loading. My reason is that the gun is not set up to operate with an extra cartridge on the lifter and you may cause a stoppage when you need it the most. Hope that helps
Thank you. I couldn’t figure out how to clear the shells from the mag tube.
@JonCresswellUk
2 жыл бұрын
☺️👍 glad it helped.
Amazing video, thanks a lot :)
@JonCresswellUk
Жыл бұрын
You’re welcome! What did you like the most?
@125varma
Жыл бұрын
@@JonCresswellUk I'm about to purchase this gun and the amount of information you provided was very useful and accurate. I also enjoyed watching the gun being shot by a man who has been shooting for a long time and knows how to use a gun. Sorry for my bad English, but anyways, awesome video and information!
@JonCresswellUk
Жыл бұрын
@@125varma enjoy! It’s a great shotgun. I hope you enjoy it as much as I do. Thank you for your support 👍
Nice video dude. I’m an m4 guy myself; but this shotgun is legit and fun to learn about. Thank you.
@JonCresswellUk
2 жыл бұрын
Thanks 😊. Now I do like an M4 too but we can only have straight pull in the uk ( no semi auto over .22 😢). I do like the beretta, it’s a decent shotgun 👍
@FreedomsLife1776
2 жыл бұрын
@@JonCresswellUk so are you not in the UK?? Are you an intrepid American???
@JonCresswellUk
2 жыл бұрын
@@FreedomsLife1776 I’m in the uk 🇬🇧
@FreedomsLife1776
2 жыл бұрын
@@JonCresswellUk so how did you get your hands on a self loading 12ga?? Is all of this outside of country or are you active duty?? Really appreciate the communication BTW; I love talking to folks across the pond.
@JonCresswellUk
2 жыл бұрын
@@FreedomsLife1776 we’re allowed semi auto shotguns. You can legally have a 3 shot semi auto on a SGC (shotgun certificate), but if you want a larger mag capacity like the beretta for comps then they have to go on our FAC (firearms certificate). Our licensing laws are pretty different from the US. We have to request the calibre during the FAC application process, write a letter about firearms experience, be a full member of a Home Office approved club, have an interview and home inspection, get approval from our doctors. It took me 7 months to get mine!
This is a great video, thanks for doing it. I don't mean any disrespect when I say that honestly I didn't know your overlords over there allowed you guys to have any weapons at all so I was surprised to hear your English accent and see you were there. Anyway thanks again.
@JonCresswellUk
Жыл бұрын
We do have strict licensing laws here, but we can use firearms for sports
@Chris.Plunkett
Жыл бұрын
@@JonCresswellUk too bad. I hope things get better for you guys there.
@JonCresswellUk
Жыл бұрын
It’s all good 👍 I have a nice selection 😁
Well done. good illustrations. Good content. Sub'd
@JonCresswellUk
10 ай бұрын
Thank you for your kind words and for subbing 👍
👍🏼🇺🇸 well done
@JonCresswellUk
2 жыл бұрын
Thank you sir
Excellent guide sir thank you. Could have show how to quickly field clean tho
@JonCresswellUk
Жыл бұрын
A quick pull through with an oily bore snake 😉. I generally just clean when I get home 😊
Thank you! Knowledge of unloading this gun eluded me. You might have saved a life... my dignity for sure!
@JonCresswellUk
2 жыл бұрын
I’m glad you found that useful, as it’s really not clear how you unload it otherwise. Always worth getting some dummy cartridges and making sure you are comfortable with loading, quad/hand loading, and unloading before you hit the range. I found it really helps.
@redneckzen
2 жыл бұрын
@@JonCresswellUk @Jon Cresswell agreed on all points. I'm used to pressing in on the cartridge retention catch from the inside -- which is always a literal pain 😳-- but you are the first to show that pulling up on the bolt release catch does the same thing with greater safety and grace. Brilliant! This should be shouted from the highest peaks ... or at the very least included in the instruction manual. Thanks from a Yank. 👍
@JonCresswellUk
2 жыл бұрын
@@redneckzen thanks 😊🤜🇺🇸🇬🇧🤛
Berett❤
@JonCresswellUk
Жыл бұрын
Beretta are awesome 🤩
güzel anlatım
@JonCresswellUk
2 жыл бұрын
Teşekkürler
Hi Jon, i have the problem that while ghost loading the loading ramp sometimes don't hold the up position. When i load a cartridge sometimes i hit a little bit the ramp mechanism and the ramp slides down. Then one cartridge is lifted in the chamber and it is not possible to load more rounds in the tube... Is there a trick / tip how i can manage this?
Just another kudo to you for this instructional video from another new 1301 Comp Pro owner. Beretta should pretty much be ashamed at how they've done their manual, which makes it very hard to understand how to unload the gun safely. In terms of complexity the 1301 reminds me a bit of the old Franchi Spas 12, which had some sort of similar magazine lock mechanism.
@JonCresswellUk
Жыл бұрын
Thanks 🙏. Yes, it could be clearer about how to unload safely. Hopefully my demo was ok. I’ve not used the spas 12, but that’s an iconic shotgun 👍
great video, wel presented, Nice one Jon, just a thorght it you changed the title to include “A400 action” you might pick up some more views, as I stumbled on it but found it very helpful in how to load and unload my new A400 xcel 3 shot that i have for sporting clays & skeet. Cheers
@JonCresswellUk
2 жыл бұрын
Ah thanks👍 I did a part 1 video too that you may be interested in - Beretta 1301 User Guide: Routine Maintenance - Strip, Clean, Assemble kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
@JonCresswellUk
2 жыл бұрын
I’ll leave the title as it is for now, but will add the A400 tag to my next Beretta video 🤝👍
You sound ex police/army, never heard "working parts" outside of work in my outside shooting lol
@JonCresswellUk
8 ай бұрын
Lol, whoops…yes…I was in the Royal Marines for 17 years
hi, thks for the clear explanations, a stupid question, when aiming you have both eyes opened and you always try to allign both sights or use just the front (green) one for fast shoots?!? thks
@JonCresswellUk
2 жыл бұрын
Not a stupid question at all 😊, I shoot with both eyes open, look over the top of the barrel and use the fore sight (green dot) for most targets. If it’s a long shot I will use the mid bead too, but generally I go off the front sight and shoot instinctively.
@lucianomicale1099
2 жыл бұрын
when using the mid sight for long shots do you close one eye(last question i promise)?!?
@JonCresswellUk
2 жыл бұрын
@@lucianomicale1099 not normally no. I am right eye dominant so it seems to work ok. Everyone has their own techniques so if you close one eye that’s not wrong at all. I just prefer to shoot both eyes open so you have better peripheral vision. Don’t worry about asking questions ☺️ it’s good to chat
Great video sir. But sorry that was not a proper ghost load and you are now one round less capacity because of that flaw
@JonCresswellUk
Жыл бұрын
Thanks Connor. Do you have a 1301? If so how would I do I proper ghost load please?
Thank you for passing the knowledge 🙏
@JonCresswellUk
Жыл бұрын
You’re welcome ☺️. Did you see both the beretta videos?
What are choke’s for ? Could you do a video on that subject please
@JonCresswellUk
8 ай бұрын
Yes, I'll do a video on this - good idea. Shotgun chokes are used to control the spread of shot pellets as they leave the barrel. They come in various types, such as cylinder, improved cylinder, modified, and full choke, each affecting the shot pattern differently. Chokes allow shooters to adapt to different shooting scenarios, from close-range targets to those at a distance.
Hi! The new 1301 comp pro that I gave to my son for his birthday, has the curious habit, with 35 grams, of expelling one every two or three shots downwards. So, after the session, you have to go and look for the non-fired cartridges on the ground ... For this reason we are sending the 1301 comp pro to Beretta to have it checked. Do you have an idea why? It has a 10 round magazine and a 50 barrel
@JonCresswellUk
2 жыл бұрын
Wow 😮 not sure that’s right! I haven’t had that happen to me. Sounds like the loading gate is not working correctly or there’s an issue with the cartridge latch that holds the cartridges in the mag 🤔 Definitely send it to beretta to get it checked out. I hope they fix the issue for you, don’t let this put you off the shotgun, it’s a great bit of kit normally.
@motoacquatico1967
2 жыл бұрын
Jon, rest assured, my son loves his birthday present! 👍💪... and then, he must prove to me that he is better in everything than my Derya MK 12 ipsc, that in the challenge we made on 100 shots with mixed ammunition 28 and 35, my “KTM” (😁) never jammed, while his Beretta ... cheated😜
@JonCresswellUk
2 жыл бұрын
@@motoacquatico1967 🤣 kids have a great habit of beating parents at challenges - watch your six 🤣👍
hi, is it possible to install a A400 barrel? i asked Beretta and strangely their answer is not clear at all. Many thanks from a beginner.
@JonCresswellUk
8 ай бұрын
Hi, I’m sorry, but I don’t know the answer. It looks like the A400 uses the same receiver, so it's feasible, but I’m no expert.
Can I ask where did you get the stickers with your name on them from?
@JonCresswellUk
2 жыл бұрын
😁 I think it was Amazon amzn.to/3yC3nog
Cool! Will the A300 Ultima Patrol empty the same way?
@JonCresswellUk
Жыл бұрын
I think so yes 👍 it’s the same receiver as the 1301. The manual just says to push the cartridge into the mag tube and press the shell catch lever. Give it a go with dummy cartridges and let me know how you get on
@bangsnap2651
Жыл бұрын
@@JonCresswellUk awesome thank you. I’m planning on heading to the range tonight to give it a try!
@JonCresswellUk
Жыл бұрын
Hope you had a great day at the range
Can you ghost load with 1 in the chamber?
@JonCresswellUk
2 жыл бұрын
I haven’t needed to, but I’m sure there’s a way of doing it 🤔. I’ll have a play and work it out.
I must be missing something; why don't we flag-in at 10:24? I'm not sure I follow why we have to fire off the action again after we proved clear. I reckon it's a double-safety-good-habit?
@JonCresswellUk
Жыл бұрын
Yes, it’s a good safety habit to get into. I always prove the gun clear then flag, that way anyone else knows the state of the gun (well, at least that there is nothing in the chamber).
What shot shell caddy are you usen?
@JonCresswellUk
2 жыл бұрын
It’s the Magload Nexus 28 magload.co.uk
Great video. Beretta does not include the owner's manual with their shotguns, expecting you to download from their web page or request a hard copy. While they claim environmental responsibility and reduction in paper waste, safety is compromised by not including a manual with this firearm.
@JonCresswellUk
8 ай бұрын
Hopefully the video helped explain a few bits. Did you watch part 1 too?
@nickprague1481
8 ай бұрын
not yet@@JonCresswellUk
What she’ll carrier are you wearing?
@JonCresswellUk
3 ай бұрын
Magload Nexus 👍
Why is my bolt release button so hard to push? @8:12
@JonCresswellUk
20 күн бұрын
It shouldn’t be…mines like a hair trigger! Maybe strip the shotgun, and use some spray oil to clean the mechanism and button, there maybe some grit/debris in it.
Why dry fire after unloading before racking the action again?
@JonCresswellUk
Жыл бұрын
When did I do that? Was it part of clearing the gun?
@JoernR
Жыл бұрын
@@JonCresswellUk - 10:45, part of clearing/unloading/preparing for transport or storage. You dry fire the gun for uncocking, then you cock it again. :) Did I overlook anything? I don't own a semi-auto, yet, so I don't wish to go out on the limb too far. I am presently trying to decide between a Beretta 1301 and Mossberg's 940 JM Pro /Tactical, which turned out to be quite difficult: I like the regular 1301 and JM Pro , but already got a shotgun with a long barrel - and I just cannot stand the looks of the tactical 1301. :D
Man, thank you for these videos. I commented on a previous video you had about the cleaning. Once input that O ring back where it should. Hot damn. This bitch likes to eat. I'm trying to figure out how to hold the bolt back, to change a different load. Example: I'm shooting slugs, need to change up to 00 Buck. I need to not have the shotgun cycle the next round, so I can load the different round. I also just noticed that the comp pro, has the same bolt release as the tactical. I have the comp and it's now my fave firearm in my collection to shoot. Thanks from 🇨🇦
@JonCresswellUk
Жыл бұрын
Hi 👋 thanks for reaching out again! Great to hear your enjoying shooting your Beretta! I am about to upload a shirt to demonstrate how to hold the bolt open to the rear - I hope that’s what you mean? Let me know if I haven’t answered your question and I’ll try to work it out 👍
@JonCresswellUk
Жыл бұрын
See kzread.infoJnJZcG-Zxp0
@chocol8thunda
Жыл бұрын
@@JonCresswellUk yes. So I can switch a load with our having to load the magizine.
@JonCresswellUk
Жыл бұрын
Have a try with dummy cartridges and see if that works. Thinking about it, it may bring one of your slugs up on the lifter…I’ll have a play with some dummy cartridges and see too. If you are shooting a stage with slugs and buck you could only load the amount of slugs you need and then quad load in the buck? I’d be cautious mixing your load in the mag.
@chocol8thunda
Жыл бұрын
@@JonCresswellUk I don't shoot competition. At least not yet. Just more of when I'm out in the bush hunting and need to change to a bear bang for instance. I have dummy rounds. I'll try it out. Going to the range in Monday too.
Why do you pull up at the front of the bolt release to eject cartridges? Can’t you just press at the rear end of the button?
@JonCresswellUk
2 жыл бұрын
Weirdly not on the comp pro 😞. I’m sure that’s what you can do on the 1301 and 1301 tactical, but when I tried it it didn’t work on mine 🤷♂️.
@chris8424
2 жыл бұрын
@@JonCresswellUk thanks for the tip and quick reply. Def learned something new from your vid. Subscribed!
@chris8424
2 жыл бұрын
@@JonCresswellUk I think I saw somewhere that people were accidentally ejecting cartridges on older models. So perhaps beretta changed the mechanism here to prevent that. I’ve even seen aftermarket parts that prevent accidental ejections.
@JonCresswellUk
2 жыл бұрын
@@chris8424 no worries, great to chat 😊 thanks for subscribing I appreciate it 👍
@JonCresswellUk
2 жыл бұрын
@@chris8424 probably. The button literally only operates the bolt release of you push it. I drop enough when I’m quad loading 😅 so probably best they fixed it
You did that on after finishing a stage... You are very close to breaking your 90...
@JonCresswellUk
29 күн бұрын
Thanks Rob, I’ll bear that in mind 👍
Ok, soooooo, where is "Beretta 1301 User Guide: How it works, Loading & Unloading (Part 1)"?
@JonCresswellUk
5 ай бұрын
Part 1 is here kzread.info/dash/bejne/aJ2rmpmdfZXTgps.htmlsi=jYz-U5mXV9kcR7kV
Interesting, I can only fit 9 shells of 67mm in mine...
@JonCresswellUk
9 ай бұрын
It must depend on the cartridge manufacturer I guess. If a cartridge or two are slightly taller then that would reduce the capacity
@pierreb7878
9 ай бұрын
What is the actual measured size of yours when you feed 10. The one I have been trying are less than 61 mm tall.
What happened to Part 1?
@JonCresswellUk
Жыл бұрын
It’s here kzread.info/dash/bejne/aJ2rmpmdfZXTgps.html
@kents7260
Жыл бұрын
@@JonCresswellUk Thank you! I think I missed it because I was looking for something with "part 1" in the title. Thank you again!
@JonCresswellUk
Жыл бұрын
Sorry, my bad 😞 glad you found it in the end
Which kind of ammo you shouldn't use?
@JonCresswellUk
2 жыл бұрын
The Beretta 1301 can shoot cartridges from 70mm(23/4 in)/24g(7/8 oz), to 76mm(3in)/57g(2oz) cartridges. It can use birdshot (lead and steel), buckshot, and slug 👍
@TheDzugasvili
2 жыл бұрын
@@JonCresswellUk thank you, in order to shoot slugs, which stroke should I use? And also, there are some limitations about case back? Like F2 or F3 type
@JonCresswellUk
2 жыл бұрын
@@TheDzugasvili I would recommend using the Cylinder choke. Do not go tighter than IC choke. DO NOT shoot without a choke in your gun you will destroy your threads. I’m not sure about the limitations of F2 or F3 - hopefully someone in the chat can help?
@TheDzugasvili
2 жыл бұрын
@@JonCresswellUk so shooting slugs with 4 star choke Is possible?
@JonCresswellUk
2 жыл бұрын
@@TheDzugasvili I recommend using 5 star chokes but I have seen people use 4 star chokes. If in doubt use 5 star or seek guidance from the manufacturer.
1301 vs m2 speed
@JonCresswellUk
2 жыл бұрын
I’d love to do that video comparison- both great guns 💪. Biggest difference is the action, the Beretta is gas operated and the M2 is inertia operated. I think this one goes down to personal choice - I’d happy have either!
@aanaan2187
2 жыл бұрын
@@JonCresswellUk i am an athlete ipsc shot gun bangkok thailand
@JonCresswellUk
2 жыл бұрын
@@aanaan2187 excellent 👍 which do you prefer?
@aanaan2187
2 жыл бұрын
@@JonCresswellUk Beretta 1301
@aanaan2187
2 жыл бұрын
Mossberg 940 jm pro Benelli m2 speed
That isn't ghost loading.
@JonCresswellUk
Жыл бұрын
How would you ghost load?
@Brrr410lbc
Ай бұрын
With full magazine, pull bolt back, place one in chamber, and then place another round directly on top of the lifter and keep round pushed down until slowly releasing bolt forward OVER lifter round.
@JonCresswellUk
Ай бұрын
Top tip
I have beretta 1301 comp but i can fill 4 cartridges.What am I doing wrong...the label is written 4+1
@JonCresswellUk
11 ай бұрын
It maybe you have the standard beretta 1301 without the magazine extension?
I wish the unloading worked on the a300 ultima patrol
@JonCresswellUk
Жыл бұрын
How does it work on the A300?
@lumpiamasterfucker
Жыл бұрын
@Jon Cresswell you can't push down on the loading ramp and lift the bolt release to eject a shell. You basically have to just cycle through. They made it so when you push down on the loading ramp, it blocks the bolt release from being able to be function.
@JonCresswellUk
Жыл бұрын
Oh 🙁