I like how you showed a poor fit, adjusted it, and then showed the results. Its such a key skill that no one ever seems to show unless a fit is atrocious. Impressive build. I saw Yeager at Oshkosh one year. He had his P51 there is a row with about 10 others. I'll never forget it. The guy was in his 70s, and still flying a P51. They don't make heroes like they used to.

I miei complimenti, modello STUPENDO E FANTASTICO 👍👍👍👍👍👍👍👍👍

Moc pěkná práce . Taky se pokoušíme napodobit tenhle model

Hello mr. Scale!nice little gem u have created.great job done.keep it up and keep the faith.with sticky greetings from Brandenburg/germany.your modellmate.christian

Beautiful work, but even better is seeing how you added so much detail! Thank you for sharing your techniques!

Very nice aircraft kit Bell X-1 Machbuster rocket powered aircraft. I like this plane so far.

I found very interesting the part of the building when you repair the mistake on the wing. Maybe more interesting then the rest because I learn a lot in this cases and personally I found the very mastery of your abilities 😮

I can only really speak for myself, but time management is a major issue for me when it comes to completing builds. This video is a great example of how decisive planning, and visualizing a deadline, can help some people utilize the time they might have to the fullest. I also really like how you illustrate here with your late repair on the wings how nothing aside from melting (but there may be a remedy for this someplace I have yet to hear about) is a dealbreaker on a build. Often, once my skills and knowledge catch up to my ambitions, I revisit old incomplete builds I might have abandoned due to a mistake or something I assumed was a permanent situation. Looking forward to more of these in the future.

One finishing point you missed out on…. Just a thin piece of plastic stretched spru to represent a cut off piece of broom handle and it will be complete. Otherwise a excellent piece of work.👍👍👍

Excellent build of such an iconic aircraft flown by a legend. You are an artist.

Good referance shots, wish you would have added Chuck with his broom stick handel he used to close the hatch with because of his broken ribs.

Ten pohled na to křídlo moc dobře znám :-d ... ne parádní stavba a postavím si ho přesně podle ní .. díky moc za inspiraci

Great job. I need to get this kit for my History of Aviation collection.

You have the best music of any model channel on KZread.

Congratulations!!!! Big Hug made in Brazil!!! 🍷🍷

😊All it needs now is a loading bay and a modified b29 with personel.

@c123bthunderpig

6 ай бұрын

That's going to be a BIG diorama :-)

Great build, loved it, really enjoy watching your work. Look forward to the next one. Jason 🇬🇧

Looks like pealing potatoes all weekend 😅 must have been to many smoking breaks and trying to wash clothes and bake a cake 😅😂 what a fantastic class lesson as always watching another surgeon win! 👏

Excellent!

Another great video and one showcasing a fantastic bit of history. I admire the fact you included your mistake as model builders and makers have all been there regardless of skill or attention to detail. In the end everything turned out amazingly good.

Terrific job

Impressive. Wonderful build of an iconic aircraft.

Lovely job and, if you makes you feel any better. Where it showed you noticing your minor mistake, I still had to go back twice in the video before I saw the problem. (And I even had my glasses on.) Very nice, thankyou.

Pěkná práce Pepo. Čekal jsem sice jiný model, ale tohle je rozhodně parádní překvapení. Za mě parec hore jak za výběr předlohy tak stavebnice. Ať to lepí.

@DetailsScaleModels

6 ай бұрын

Díky. Neboj, Hs 129 se již stříhá. Tohle byla jen taková "vsuvka"...

@TomasFaktor

6 ай бұрын

@@DetailsScaleModels Každopádně hodně povedená. Je to asi měsíc, co jsem tyhle fotky Glennis z muzea objevil na netu a řikal si: "To by bylo tak pěkný, kdyby to někdo postavil.." Mno, a ejhle..

Bravo. Absolutely outstanding.

Amazing work!

Beautiful work, as always, my good friend!!

Awesome, I know how it is to want to keep going because I love building, I know you had a video to get out, but I'm sure you still enjoy your skilled craft , very cool buddy from Ocala Florida

Great!

very very detail

Incredible build, one iconic model every modeler needs in their collection. I just checked Eduards and they say discounted, so I am on the hunt. Cheers

Fantastic video... 👍🏻👍🏻👍🏻

Fantastico!!!

I missed the broomstick. (Legend has it that Yeager had hurt his shoulder prior to the mach bustin' flight. He kept it a secret, as he desperately wanted to do this flight. The injury made it difficult for him to reach over and open the latch of the hatch. So he cut a piece of broomstick and took it with him in the cockpit to facilitate that...)

Excellent build, and good save on the wings!

Great concept for staying on pace to finish. Budgeting time is very important in this hobby as well. Thanks for sharing your excellent work and your philosophy on the topic of time as well.

super

Nice. Really enjoyed the video.

Greetings my friend, it was great to see another of your videos, and the quality of this build was exceptional, I hope it is not too long before we see another video from yoj bedt regards from Australia 👌👍👌👍👌👍

Craftsmanship. You inspired me to buy the Bell X-1 and have a go myself. 👏🏻👏🏻

Love it! Great execution of a great subject!

Wow, nice! Really gives you the detail of the interior. Well done!

Inspiring stuff! There's always more detail that can be added than what is included in the kit. I have a handful of 1/48 kits collected that I need to build, have done a couple before but i've never completed a kit in such a short amount of total time.

Great job! 😁

Amazing! Great craftsmanship! My X1 is still waiting to be built...love your work...

Nice work

Nice job 👍 Great kit,

Beautiful scratch building of cockpit and fuselage details. Your video was very helpful showing how you rescribe panel lines and add rivet lines etc. I am interested to try some of your methods

Very intersting brother

Great job 👍👌

Very nice clean work especially for such a short amount of time! Respect that you even went back to fix the wings, think I might have just left them as they were if I realised 😂

TOP👍👍👍

Lovely work and a good save with the wing detail.

very nice result, really well done!

Looks cool ✈

Hi there escellent build indeed, very good technique and skills :) Did you know the unfortunatly Mr Hobby has changed the H58 Interior green for greener color? Shame on them, it would of been much much better to add a zinchromate color instead. You still have the old one good for you :)

You made a good kit better. 👍🏻😊

Nice work 👍🏻👌🏻👏🏻

Very nice job. Makes want to go get one. Only problem is I will need twice that time frame to come close to replicating your gem. Cheers

Super práca Jozef.👍

Mistře, skvělá práce - smekám.

Did you remember to add the end of a broom handle inside the cockpit? On the famous flight, Yeager could not close the door panel due to an injury and had to use that handle to aid the closure of the door.

should have made a little broom handle to close the hatch when Check busted his ribs the night before the flight .

Perfect work 🔥🔥🔥

Niceeee!

Ahoj. Super video. Pokračuj prosím ve videích ❤

Jeden malý detail chybí. Klacek xD jinak moc hezký

凄い。完璧ですね。

Ahoj Pepo. Tohle videjko mě opravdu velice pobavilo. Měl by jsi být ve videích více vidět. Ty záběry při zjištění chyby nemají chybu Je to malinko zlomyslné, ale jsem rád že nedělám chyby jen já Jinak opět naprosto brilantní práce. Krásné éro a parádní model 🙂👌

SUPER SONIC 😮 ⭐⭐⭐⭐👍👍

Super video a super nápad na další kontent kanálu. Takhle jsem se dlouho nezasmál 🤣😂🤣! Jste borec, že si ze sebe dokážete udělat srandu a ukázat, že i mistr tesař se někdy utne. Jen tak dál a houšť. Díky za všechny videa co děláte i za skvělou práci pro komunitu modelářů.

@amess6790

6 ай бұрын

Beau travaille !!!!maestro

Courtesy of the miles 52 program.

❤❤❤🖖

What a lovely video, so relaxing and enjoyable to watch. Filled with great model making skills which you have so kindly shown the modelling community. Did you take the photos of the real machine or where they from a book?

@DetailsScaleModels

Ай бұрын

Thank you all for your feedback. Photos are from the website: airandspace.si.edu/stories/editorial/breaking-sound-barrier-75th

@weekendmodeller2740

Ай бұрын

@@DetailsScaleModels Many thanks sir.

Was that a part of some contest?

@DetailsScaleModels

6 ай бұрын

No, just a little rest...

Sem chance! 😅

What type of tools and materials were you using?

@DetailsScaleModels

6 ай бұрын

Thank you all for your feedback. I use plastic profiles from Plastruc ang Evegreen to create details

Is this Eduard plastic, or a rebox of another kit?

@DetailsScaleModels

6 ай бұрын

It is a reissue of an old Eduard model from 1997

16:09 I was wondering about that from 3:39

16:12 hahahahhahaaha!

Zdravim, nerozumim proc eduard nepise kolik gramu zavazi tam dst, a protoze vidim ze vam nepada na zadek, tak jsem se chtel zeptat kolik gramu tam mate? Diky

@DetailsScaleModels

14 күн бұрын

Závaží jsem dával odhadem. Nemám ponětí, kolik to bylo gramů. Nikdy to nevážím. Raději dám víc, než aby mi to přepadávalo...

@tomasvobruba9780

13 күн бұрын

@@DetailsScaleModels no jasne ale moc zase ohyba podvozek.. kazdopadne diky za odpoved

@DetailsScaleModels

12 күн бұрын

Tady u toho modelu je podvozek dost subtilní a z tvrdého plastu. Ten unese i cihlu...👍

The reason I don't make models like this is because I would break off those thin pointy bits in about 5 seconds.

🤦🏻‍♂️😂😆

Зважаючі на те, що літак не мав довгої експлуатації, а доглядали за ним, як за новонародженим, старіння кабіни, weathering трішки недоречне.

man all perfect but please improve your camera setup🙏🙏🙏

The prototype F-86 broke the sound barrier multiple times before the X - 1