How to Setup the Load on a Solar Charge Controller

Тәжірибелік нұсқаулар және стиль

All you need to know about the load section on a solar charge controller.
👍🏻 Please consider liking & subscribing 🙏🏻 :) Thanks for watching and have a good one! ✌🏻
Products mentioned in this video (affiliate links): ⚡️Solar Charge Controller: amzn.to/3GShBVx 🔗
Battery Monitor: amzn.to/3XCnw7o
How to Setup a Solar Charge Controller: kzread.info/dash/bejne/d3aez6Oefsiqmag.html
UPDATE: If you set the timer to 0H, It actually runs from dusk to dawn, not dawn to dusk like I said.
#️⃣SolarChargeController #️⃣Load #️⃣Setup
⏰ Time Stamps ⏱️
Introduction: 0:00
Overview: 0:36
My Setup: 2:02
Wiring: 2:31
Load Setup: 3:05
3 Options: 4:23
Ending: 5:37
🔋 POWER STATIONS I Recommend (affiliate links) 🔌
1) Bluetti AC180 - Fantastic mid range! ⚡️ amzn.to/47WwsKk 🔗
2) EcoFlow Delta 2 - Great all around! ⚡️ amzn.to/3gHwU9L 🔗
3) EcoFlow River 2 Max - A King of the mini’s! ⚡️ amzn.to/3THpOzL 🔗
☀️ SOLAR PANELS I Recommend (affiliate links) 😎
1) Newpowa 100-Watt Rigid Mono ⚡️ amzn.to/3Ei1cId 🔗
2) EcoFlow 110-Watt Folding Mono ⚡️ amzn.to/3nm4IbA 🔗
3) Bluetti 200-Watt Folding Mono ⚡️ amzn.to/3UNwYUr 🔗
🎥 MY CAMERA GEAR (affiliate links) 🎒
📱 iPhone 14 Pro Max
📸 DJI Action 3: ⚡️amzn.to/3kTlotZ 🔗
🤳🏻 Tripod: ⚡️ amzn.to/3BzEdYs 🔗
🎙 Microphone: ⚡️ amzn.to/38bSFYJ 🔗
👷🏻‍♂️ Scott’s Mini Campers: youtube.com/@ScottsMiniCampers 🛠️
🙋🏻‍♂️ Scott Russon: youtube.com/@ScottRusson 🏕️
🤔 Scott’s Fascination: www.youtube.com/@ScottsFascination 👂🏻
*Links in the video, description, comments or channel may contain affiliate links. Scott Russon is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. FTC Disclosure Statement: Links provided on this KZread channel may contain affiliate links. Scott Russon may get paid if you buy something or take an action after clicking them. By clicking on the links, it does not affect the price you pay for a product, but it can help support my channel, and I do appreciate it. :)
*Disclaimer: These videos are for educational and entertainment purposes only. Information is subject to change/update at any time. Any action or information taken from this video or description is done at your own risk. Scott Russon assumes no liability. Be smart, follow instruction manuals, and use common sense. :)

Пікірлер: 214

  • @memorywarrior8752
    @memorywarrior875210 ай бұрын

    Brilliant Scott, you answered the exact questions I needed to know. Thank you for taking the time to put together this video. Given that the timing control for the load is not very flexible on the unit itself, I think I'll switch the load to ON permanently and use a separate timer to control the power to the load. 🙂

  • @JustScottPaid
    @JustScottPaid3 ай бұрын

    GREAT job SCOTT!!! You've explained this better than anyone. We really appreciate the help and the time you take out of your busy schedule to teach us. Now I'm going to go watch another one of your videos and see what else I can learn from your excellent tutorials. Be safe

  • @sixoremenos
    @sixoremenos8 ай бұрын

    The clarification you gave about the USB ports was my question answered. Glad I stayed till the very end of your very helpfull video. Thank you vey much!

  • @chrisread6103
    @chrisread6103 Жыл бұрын

    Thank you for taking the time to tell me how to set the load settings. I also email your link to myself for quick review. Nice.

  • @Rupe51
    @Rupe51 Жыл бұрын

    Thanks Scott ... that really got me started well on this same controller.

  • @rodkirt9273
    @rodkirt9273 Жыл бұрын

    Thank you . I have one ordered and now I know how to set it up . Nicely demonstrated !!👍

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Thank you!

  • @francoisguyot9770
    @francoisguyot977010 ай бұрын

    Hi Scott, nice explanation on the built in output port. Since this output allows to schedule the time for either 12 VDC or 24 VDC devices, it can easily drive a relay coil at one Amp. Then the relay makes it possible to control the timing of the inverter that powers 120 VAC loads. The inverter consumes power at night unless it's turned off, unless the capacity of the battery allows to resume the charge the next morning. All that depends on how much Ah your battery is capable. As far as the USB is concerned, since it's enabled all the time, it can be used for a small LED motion sensor light whenever servicing the unit at night or to power a security camera. I got a newer version of this PWM controller from Temu for about $15, but I ordered the 24 VDC to give me 720 W max or 240W if I follow your derating. Anyways, that's plenty enough to drive all four air pumps and the two 200 GPH water pumps for my pump through a 300W PWM inverter from Temu that I paid only $25 and 2 200W used solar panels at $20 each! Great deal overall!

  • @Jester12036
    @Jester12036 Жыл бұрын

    Very informative. I learned something today.

  • @GoMandiMartin
    @GoMandiMartin4 ай бұрын

    You're amazing! Thank you so much for the help 😀 Mandi

  • @markirish7599
    @markirish7599 Жыл бұрын

    Brilliantly presented video 👍

  • @robertpaulis439
    @robertpaulis439 Жыл бұрын

    Good job explaining and hope you'll make more videos as you get farther into solar.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Thanks Robert! I appreciate that!

  • @Sandman755
    @Sandman755 Жыл бұрын

    Thanks! That was really helpful.

  • @danaelenei5573
    @danaelenei5573 Жыл бұрын

    Good job! Thanks!

  • @user-un3kq8dv2e
    @user-un3kq8dv2e Жыл бұрын

    Perfect just what I needed to know 👌

  • @mrgreat684
    @mrgreat68410 ай бұрын

    Many thanks for clear explanation.

  • @mosspinzo4523
    @mosspinzo45236 ай бұрын

    Thank you for your service. It's clear.

  • @phoenixrisingharley
    @phoenixrisingharley Жыл бұрын

    fantastic video, just what i needed. i have multiple charge controllers set up to all our vehicles, ride on mowers, tractor cars now im starting on solar/battery powered grow lights, all this time i had no idea what the load really does, the instructions are not very clear to me and i diddnt need the load anyway, but it was the dusk to dawn thing i was now looking at, for auto on off for grow lights, i just bought a system/kit panels, lifepo4 battery and 30amp charge controller (thank you for pointing out 30amp is prob not 30amp on a charge controller i would not have known this) and i also would have bought the dusk dawn snesors but now will buy a separate larger charge controller and use the load feature with timer. t start with i only have 18 x 9watt led baton lights, so around 200w all together. Im glad to find your channel Scott, i live remote and youtube/google is how i learn to do all the stuff i need to be self sufficient so this is GOLD thank you.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    You bet, thank you! Also, just know this controller doesn't work with LifePo4 batteries. Best of luck!

  • @Crozbyguy-rg1iu
    @Crozbyguy-rg1iu3 ай бұрын

    Best video on this controller, I know because I saw the others.

  • @hugocastellano1962
    @hugocastellano1962Ай бұрын

    Much appreciated Scott. I have this 30amp unit. Connected to my 110 amp leisure batterles with 1 2x100w solar panel with a 1000w invertor does this sound OK.can I add another solar panel to the set up

  • @Electronzap
    @Electronzap10 ай бұрын

    Good info.

  • @raymondignacio812
    @raymondignacio812Ай бұрын

    awesome! thanks for the info

  • @thedentons50
    @thedentons509 ай бұрын

    Spot on mate I’ve just bought this and it’s coming today lol

  • @lyndonadifaka617
    @lyndonadifaka61727 күн бұрын

    Thanks you so much. Your explanation is easy to follow and I've learnt a lot from this video.

  • @paulkelly1867
    @paulkelly186710 ай бұрын

    Hi. Can you explain the different types of batery setting? And what one is best for a conventional led acid wet battery. Thanks.

  • @mariuspitifie
    @mariuspitifie8 ай бұрын

    Thank you!

  • @markwest2936
    @markwest29366 ай бұрын

    Great video.

  • @goldprounlimited1750
    @goldprounlimited175011 ай бұрын

    Thanks for the vid ! i think i have the same controller, used it over the weekend and i don't think it was working. how can i tell if the solar panel is charging my battery?

  • @nursegilbey
    @nursegilbey11 ай бұрын

    Is there a good way to utilize this in an RV? Everything is already either powered by shore power or inverter (when turned on).

  • @arsbadmojo
    @arsbadmojo7 ай бұрын

    I'm going to use this to power a small LED light in my shed. Something like .3 amps. I put a switch by the door so I don't have to fumble in the dark to find the load on/off button on the controller. I'm hoping to use to load connection to prevent me from killing the battery if I forget to turn the light off. (My unit is a bit newer, will have to see if the discharge stop is still set to 11.3 as you explained in another video) but will that work? If the switch is "off" at the door, and the load is set for 24, will having no load on the load (because of the switch being off) cause any issues? And if I DID leave it on, would the light just keep cycling at the discharge reconnect/discharge stop? I'm thinking it would.

  • @kingtitan2051
    @kingtitan2051 Жыл бұрын

    What is the optically controlled voltage? Can't find anything on it. My set to 5v but goes to 10. Anything would help.

  • @dismaldunc
    @dismaldunc5 ай бұрын

    thank you , that was very helpful

  • @ScottsSolarProjects

    @ScottsSolarProjects

    5 ай бұрын

    You're welcome!

  • @odiliomartinez6811
    @odiliomartinez68112 ай бұрын

    Thank you, very clear explanation. I have a couple of questions if you are able to answer, much appreciated. i have a 120W water pump, can it be run via the load setting or would i have to run it from the battery. If i run trough the load it would enable me to use an irrigation controller and a small relay to control the circuit.

  • @LoverofChrist777
    @LoverofChrist7772 ай бұрын

    I ordered a two panel solar kit. And the solar panels already have a place for wires on the back of them. As they were part of the $50 kit. At your convenience if you could help me with this I would truly appreciate it. What I'm not understanding is how I'm going to hook it up the panels when they only have an extension for the little wires? Just wanting to know if it's too late for me to do anything about it. Thank you and God Bless you!

  • @benjamaya5199
    @benjamaya51992 ай бұрын

    I got an atempower controller that looks the same as yours. I can't get the 0H function to work to power a pond pump during the day only. When the bulb icon is on the pump works but it doesn't switch off at sunset? It just keeps going into the night and I have to switch it off manually. Any thoughts what I may have missed?

  • @DaryldelPrado-qx4uu
    @DaryldelPrado-qx4uu3 ай бұрын

    thats for the vid , since I am new to this I have a simple question I have a DC pump 12V 180W 80 ampere controller , can i just put the pump into the load terminal ? or shall i connect it to the battery directly ? So far i understood is the load terminal the regulated output from the Battery ? is that so far correct ?

  • @eduardosedotes7726
    @eduardosedotes77263 ай бұрын

    Thanks Bro!!!

  • @MyviMerah
    @MyviMerah3 ай бұрын

    Hi, i just curious 1 thing, how do u set the controller 12volt for the 18 volt solar panel, i'm really wanna know about that...

  • @robertp2552
    @robertp255210 ай бұрын

    I think I commented another of your videos but, would you know where I can find an adapter to connect a dv(18v) to the solar controller?

  • @mrainaandroid8208
    @mrainaandroid82085 ай бұрын

    Subscribed!

  • @seang2424
    @seang242411 ай бұрын

    BRILLANT 👌🏼👍

  • @MrLuckyLegs
    @MrLuckyLegs6 ай бұрын

    Thank you Scott, you have helped me greatly as I have the same controller (only 20amp version). The 'Chinglish' instruction sheet is confusing, so this helped me understand the functions way better, thanks again! ...I do have one problem however, my 'charge icon' (arrow from Solar icon) is suddenly not working (I have 2 x 80W slimline solar panels on top my teardrop camper trailer), but battery not receiving charge! Will look for other tutorials to help...

  • @wayneweisbecker7633
    @wayneweisbecker76335 ай бұрын

    Can I use the load output without connecting a battery? We are using the controller in a solar powered boat competition. Two of the races use only solar panels to power the boat. The third race, an endurance race, uses small batteries to power the motor.

  • @jamelletucker3694
    @jamelletucker36943 ай бұрын

    How do you set up the bulk charging parameters?....and in the beginning what are you multiplying the charger controller amps by to get the 120W of power?

  • @zayneabela2650
    @zayneabela26509 ай бұрын

    On the load side can you connect AC or DC appliance or bought

  • @robertdean3305
    @robertdean330518 күн бұрын

    How constant is the voltage output on the output side of the 60amp solar controller?

  • @vincentsgaming
    @vincentsgaming23 күн бұрын

    This is the kind of video i needed but only answered half my question. Where do you find things to run the load on? For indtance lights and small fans that have the red/ blk wire to connect in. Or do we have to cut/strip wires and manually do it? Ive trued searching amazon for dc load lights but havent really come across much besides like small van lights/ for music stuff.

  • @simonmeyerjorgensen
    @simonmeyerjorgensen11 ай бұрын

    Do you know if it possible to charge AGM batteries, with this controller? 😀

  • @claytonfarrugia9809
    @claytonfarrugia98097 ай бұрын

    Hi Scott, can you explain the functions marked on the manual as 2, 3 and 4 after the main display and before the timer function: 1) Floating charge: 13.7V (default, adjustable), 12.0-15.0V? : Can you explain what this is? 2) Discharge stop voltage: 10.7V (default, adjustable), 8.0-11.5V : This I managed, it's a limit set that when the battery voltage is below the set value ex. 10.7V, the controller cuts off the supply to the load. Unfortunately I couldn't set this below 8V, I guess it's to protect the battery from draining too much. 3) Discharge reconnection voltage: 12.5V (default, adjustable), 11.0-13.0V : Can you explain this function please? Thanks

  • @Fredlyfredlyfredly
    @Fredlyfredlyfredly Жыл бұрын

    Cool vid thanks, I'm trying to work out the simple math so i know what wattage the controller is effectively producing... When I switched the controlled on obviously all i could see is voltage.. So I'm i'm running 100w solar into a 12v battery can you please tell me the magic math so I know what its putting out in watts at any one time. Thanks!

  • @paGan124
    @paGan1248 ай бұрын

    Can i use 7Ah/12v battery if I want to light up chistmas lights on outside conditions?

  • @PatagluKadolle
    @PatagluKadolle8 ай бұрын

    I have a technical question: I am using this system for a water pump which I am as for now starting manually every day for about 30min at about mid-day. I would like to make this automatical but the options here do not seem to match with my request. The best ide that I came with is to set the discharge reconnect to it's max value and the work mode to stop at about mid-day. I didn't try this yet as I think that it would anyway work more than the 30 min what I need... The real question is : how can I set it to work only from 11h30 to 12h00 ? Maybe an external device ? Sorry for long text, I am an absolute beginner at electricity and still quite unsure of what I am doing...

  • @ChrisCorkPhotography
    @ChrisCorkPhotography Жыл бұрын

    Is there a scenario where this would switch from a leisure battery to a car battery when full? So that it charges both?

  • @dalehuhtala9285
    @dalehuhtala92853 ай бұрын

    OK, so what do you actually connect to the output load, practically? I'm using with an RV...I don't have anything that would plug two wires into a controller, so still no idea what you use for that output load...?

  • @peterk7377
    @peterk73772 ай бұрын

    So to run a 12v fridge 24hours connect the fridge to the load port and the solar will charge the battery and the charge controller will manage the charging of the battery and also running the fridge?

  • @PeterGObike
    @PeterGObike Жыл бұрын

    I have this same controller, it always gets hot and smells when the sun is high and display E12 or E16. I have 6 panels on two 12v batteries. What could be the issue.

  • @LuisAzcona
    @LuisAzcona6 ай бұрын

    so i have 21 hours selected, after sunset, it will say ON for 21h, regardless if it reaches sunrise. is this correct?

  • @stuartmenziesfarrant
    @stuartmenziesfarrant9 ай бұрын

    I'm running a 60 watt greenhouse heater through a 300 watt inverter overnight. It drains my 105 ah deep cycle battery to 10v after 2 nights? Should I be able to run this heater this way without draining the battery?

  • @user-tk9rwm2rm8c
    @user-tk9rwm2rm8c3 ай бұрын

    Hello, My controller doesn't see solar panel. I bought cheap setup from ebay... but I might have bought controller which is too strong for weak panel, am I correct? panel is 12v 60watts controller is 40amp, giant of the sun with extra 2x 12v dc sockets. I tested my panel with multimeter 11-12 volts during poor sunlight, daytime. controller see the battery, but cannot see the solar panel. any hints, or solutions ?

  • @hugocastellano1962
    @hugocastellano1962Ай бұрын

    Sorry Scott I made a mistake. I have 1x100w solar panel going to 2x110amp leisure batteries with 1000w inverter. Is this OK. Can I add another 100w panel to the set up.

  • @noahriding5780
    @noahriding57809 ай бұрын

    When people talk about a float charge for a solar charge controller, I have trouble understanding if the float charge is going to be the max charged voltage, and which would shut off the power going in? They talk about the idea of 'float charge' and bulk charge, and I'm worried if I have this at the wrong ranges for my batteries if its overcharging them. And do you want to limit the float charge for some types of batteries like lead acid and AGM battery types, and what kinds of ranges? Its also hard because on the sides of the batteries they quote cycle charges and standby charges but not float charges or bulk charges. So I'm not sure how to translate those figures to the float charge, etc?

  • @robertnoone4990
    @robertnoone49905 ай бұрын

    Great video, thanks. One further question on the load on/off. If i set for 3hrs (after dusk) and use the manual on to turn on the load when it's "off" when will it turn off automatically or will it stay on indefinitely?

  • @bho382
    @bho38210 ай бұрын

    Can you set it up with no load just to maintain the battery long term (like in a storage environment)?

  • @markoweggi5814
    @markoweggi58142 ай бұрын

    I'm using a drompower 60a mppt solar charge controller with 5 12V sealed batteries and 10 200W Solar panels. I'm unable to have electricity the whole night. Could you guide me through the load setup?

  • @user-nb9ov7qg5s
    @user-nb9ov7qg5s9 ай бұрын

    so is it ok to charge your batteries with a generator when the sun hasn't shown for a couple days. do you have to disconnect from charge controller to do this

  • @marciomaia4020
    @marciomaia4020Ай бұрын

    Great video. Can you connect an inverter to the load ports or directly to the battery?

  • @RLAIRGUNSUPPLY
    @RLAIRGUNSUPPLY Жыл бұрын

    Scott Nice job! The link you posted for the solar controller (that appears to be blue) comes up with a green one not like the demo you used and I would like to purchase the one you demoed. I am hooking it to a Pop up Truck camper and the camper has to have a maximum of 10 amps. can you provide me with a link on Amazon Please!

  • @Dupek715
    @Dupek7156 ай бұрын

    Does the charge module show how much you are currently drawing when the load is on?

  • @dinodifranco8573
    @dinodifranco8573Ай бұрын

    My controller doesn't display "0H"but does display "00". Unfortunately, when it is set to "00" I can't get the output to turn on. I am trying to power a small 12V, 6W fountain pump during the daytime only.

  • @crazycrab8578
    @crazycrab8578 Жыл бұрын

    I can run a 10" TV, Alpocool 9It fridge and a few LED lights, good vid

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Nice!

  • @caroleemoreno8086
    @caroleemoreno8086 Жыл бұрын

    Great Video! So, could I hardwire my Jackery to the load output using the provided 12volt car adapter that came with the jackery? That way I could charge the jackery during the day and have it stop charging at sunset. Since I can already charge the jackery using the 12volt car adapter by plugging it into the cigarette lighter, seems I should be able to just chop off the 12volt adapter part and use those wires to connect to the charge controller output. Other end of the adapter already has the 8mm plug on it. Am I wrong???

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Yes, that sounds like it would work. If you're wanting to tie into your existing system, then yeah, just hook up the Jackery to the load output and the Jackery should also manage charging on it's own.

  • @rebadog7
    @rebadog7 Жыл бұрын

    Your videos are to the point and that is why I decided to ask for your input. I am setting up a Solar Pond aeration with 2 100 watt panels same Controller, 100 aH 12v battery , a 225W(400W surge) inverter and a HiBlo Air pump1.6amp 120v. I need to know how to correctly connect the inverter. Should it be connected to the controller or directly to the battery leaving the load port empty. Also should all Positive 10awg wires be Fused?

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Thanks for the feedback. It depends on the rated output watts your controller load can handle. In the video, mine can only handle up to 120 watts, which wouldn’t work for your setup. So I would hook directly up to the battery. And when it comes to fuses, I’m not an expert, but I would say when in doubt, it never hurts to use one. I hope that helps!

  • @pauladams2112
    @pauladams21124 ай бұрын

    Will it work for my electric bike

  • @clocksfinle7
    @clocksfinle7 Жыл бұрын

    can those controllers run with just a usb battery bank and not connected to a lead acid battery? anybody tried that?

  • @Reman1975
    @Reman197510 ай бұрын

    Ah, fair enough. I was kind of assuming the "Load" connections were for something like a big resistor or an incandescent lightbulb or something similar, so if your batteries were fully charged, but the solar cells were still cranking out watts, there was somewhere for the excess power to go. Thanks for explaining this.

  • @kaydog890

    @kaydog890

    7 ай бұрын

    I thought the same thing. Can some please confirm? Does excess load need to be dumped? Thank you

  • @Reman1975

    @Reman1975

    7 ай бұрын

    @@kaydog890 I actually did a bit of research after writing that comment, and the answer is that there ISN'T any excess power to get rid of. Solar cells have a sort of resistance "Sweet spot" where they produce the most amps, and the charge controller plays with this resistance to modulate the panels output. That can go all the way up to pretty much disconnecting the panels so they produce a high "open circuit" voltage, but in that state they make next to no amps. This is why disconnected solar cells don't just build up energy until they start arcing all over the place and exploding. When disconnected they see a pretty much infinitely large resistance, so produce a miniscule amount of power.......... OK, this way of describing it isn't really 100% accurate, but it's close enough to how it works to be "True enough", and it's easier to get your head around this that to take a deep dive into the science behind how solar panels work. :D It helps to think of the solar cell like a kind of battery, but one that stores it's power about 90 million miles away in the sun. :D . When a charged normal battery isn't connected to anything it's still got POTENTIAL energy inside, but without any way for it to flow from one terminal to the other it's energy that's just sitting there....... twiddling it's thumbs and waiting for something to do. Solar panels have a similar sort of potential energy in the form of the light that's constantly hitting it, the difference is, if a solar cell can't do anything with this energy it's just wasted as a slight amount of heat. In most senses though, solar cells can just be thought of like batteries. To an extent you can run them in parallel to get a higher amperage, in series to up the voltage, or a mixture of both to try and keep the open circuit voltage and total amps produced below what your charge controller and wiring can handle.

  • @jebadaiah1228
    @jebadaiah122810 күн бұрын

    what else goes into the load??? besides a battery monitor?

  • @r.bouth.6457
    @r.bouth.6457 Жыл бұрын

    Hello.. I did buy this unit and id do not charge the battery at al. I hear about the cable must be G10 so what is wrong. I did change the cable to the battery to G10 and still not work. Must al the cables be thicker G10 cables ? I se that you do have a thicker cable that comes from the solar penal. How can i get a thinker cable to connect the solar penal to the controller ? Who can help me out of this so i can use it as soon as possible ?

  • @robertsavvidis8061
    @robertsavvidis8061 Жыл бұрын

    Hi Scott I have fitted a 300ah lithium battery into my caravan and had to update my MPT controller to a Mppt controller. I have a positive only load wire from the MPT. The new Victron mppt 100/50 doesn’t have a load terminal. My question is can I join my positive load and positive BATT wire together and connect to to BATT terminal on Mppt controller. I can’t get back to the battery to give the load wire power. Thanku for any feedback.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    I would say the best solution would be to hook the load right off the battery terminals. But if you can’t access the battery, that makes it hard. I’m not a professional and I’m not recommending anything, but, it would make sense to me that whether the load is connected on the battery terminal or at the end of the wire hooked into the controller, that there wouldn’t be a difference. But, again, that’s my unprofessional opinion and I don’t advise it, be careful with the wiring. You just wouldn’t want an electrical fire and ability to prevent them too. I hope that helps!

  • @brucemitchell4014
    @brucemitchell401410 ай бұрын

    Thank you for the information. You didn't mention if the controller remembers your settings once it is disconnected from the battery, or do you have to set up every time ??😢

  • @BlueThailand
    @BlueThailand Жыл бұрын

    Hello, Thank you for this informative video. Does the controller stop charging the battery automatically when it is full ? Thank you

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Sort of, it slows the charge down to a trickle charge, which is good for batteries. It regulates how much charge the battery needs based on what you set.

  • @MkatekoChestar
    @MkatekoChestar9 ай бұрын

    Hello Sir can you please help me out 😢 i have solar system at home which is troubling me.the problem is i can't watch a t.v at night but during day i can use solar system very well i have 3000w inverter, 440W solar panels and 50a Sun Solar controller charger and the time i bought all of this i used to operate it even at night so i have have but my problem is i don't know which one is should Change my batteries are 1 year old its 100ah your response will be appreciated 🙏.

  • @441rider
    @441rider4 ай бұрын

    Wow I thought it had a min batt voltage you can set to cut load to prevent battery drain. The internal timer is great will set that one.= for small 12v heater after sunset in greenhouse.

  • @hankreszka9319
    @hankreszka931917 күн бұрын

    You said 3rd option is load is on sunrise to sunset. The manual shows the opposite. On at dusk off at sunrise. Is this selectab?

  • @gfrylives
    @gfrylives Жыл бұрын

    Some people connect both appliance and mppt directly to the battery. How is this different from connecting the appliance to the load port. Thanks for sharing.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    By connecting the appliance to the load port, you can adjust the settings like when it powers on or off. But it doesn’t really work when you have a large load, in that case you need to connect to the battery directly.

  • @raluxia
    @raluxia5 күн бұрын

    For some reason the battery frame is flashing on the screen. Up and down arrows are not working. USB not working. What is the reason?

  • @aijukareagantall4676
    @aijukareagantall4676 Жыл бұрын

    i have 100ah battery and 120 w pannel (all new) during the day, it shows a fully charged battery signal (14.4v) but during the nyt after 1hr the controller displays a blinking low battery signal and lights are off . have i interfered with charge controller settings? is the battery a problem? am using lead acid battery (Incoe n100)

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Yeah, it could simply be a bad or weak battery.

  • @captaincosmo1
    @captaincosmo1 Жыл бұрын

    Hi I've just got into solar and I have bought one of these controllers. I have 8 low power LEDs which are on a 5H setting. I am using a 12v gel battery. The lights come on great at dusk but a couple of hours later the whole system starts flashing. Any ideas why?

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    The lights starts flashing? Or the controller screen? What’s your battery voltage at when they start flashing?

  • @davidevery8864
    @davidevery88644 ай бұрын

    Hi Scott, could you clarify the 00h setting? - when my device is set to that, is the load supposed to be switched on between sunset and sunrise, or between sunrise and sunset? I want the load to be on during the day while the sun is on the PV, but its not doing that - its not turning on the load in daylight when PV is coming in. Any help appreciated.

  • @sixoremenos

    @sixoremenos

    3 ай бұрын

    It is the opposite, from dusk till dawn. There is an update in the video description.

  • @ericcymbolin6854
    @ericcymbolin6854 Жыл бұрын

    Can you hook up to the load side without a battery? I’m trying to run a small water pump 2.7amps during the day only.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Unfortunately I don’t believe so. I have had success with a 12 volt fan and solar, but it would only spin maybe 10% when the sun would shine. So you could try, but you really need a battery to operate properly.

  • @Rupe51
    @Rupe51 Жыл бұрын

    Is the voltage readout accurate on your controller? Mine indicates 0.26 V higher than either the electric one I connected as a load OR my DVMeter across the main battery terminals. Not very good ... but hoping it's just a calibration thing and that the controller is otherwise good to go.

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Yes, I have seen a slightly different voltage reading off the controller, not sure by how much, I hope it works out for you!

  • @Rupe51

    @Rupe51

    Жыл бұрын

    Hey Scott ... update is that I can't alter the Float Voltage on either unit. It's stuck at 12.6. Simple solution is to return them. I'm ordering something by Renogy now. You get what you pay for. Thanks -

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Gotcha, interesting, thanks for the update!

  • @adventureswmikemarci9024
    @adventureswmikemarci9024 Жыл бұрын

    Thanks can you explain a 60 amp mppt charge controller??

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    You bet! It would be similar, an mppt controller is better and more efficient for harvesting more solar power. I don't have one to showcase, but maybe down the road!

  • @user-hm1tl8ck3o
    @user-hm1tl8ck3o Жыл бұрын

    Good job explaing. For some reason I can't get the OH settings to work and idea

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    In my video description I wrote this: UPDATE: If you set the timer to 0H, It actually runs from dusk to dawn, not dawn to dusk like I said in the video. Maybe that will do the trick!

  • @user-hm1tl8ck3o

    @user-hm1tl8ck3o

    Жыл бұрын

    OK thank you

  • @greginnes7552
    @greginnes7552 Жыл бұрын

    Hi, I've set up my controller, battery and solar panel. I was planning on running a USB heat mat from the controller. When I switch the mat on, the controller loses power, switches the blanket off then the controller comes back on. Do you know what the issue could be? Thanks

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Most likely it’s an issue with your battery. Either not large enough, bad, or the controller settings need to be adjusted so the load stays powered longer. Try lowering the load off voltage.

  • @Roundbeeman
    @Roundbeeman Жыл бұрын

    I order one of these controllers to add to my portable power box to just regulate charging my lithium battery during the day while out on the pier fishing . My question is do I have to run my lights and other thing from the load side or can I just run them off the battery like it now.?

  • @BazilOne

    @BazilOne

    Жыл бұрын

    Yes can run from battery, the load port can’t handle much load so connect directly

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    The load ports can handle up to 120 watts, if it's greater than that, just hook up to the battery. Also, this controller doesn't work with Lithium batteries, so be aware of that.

  • @bobprobert353
    @bobprobert353 Жыл бұрын

    What does the the two voltage meanings mean in the menu? You can increase and decrease.It's 12.6-14.4 volts

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    That might be the float voltage, you can set it to whatever you want, or just leave it to the default.

  • @miki_car
    @miki_car12 күн бұрын

    A 12v relay can be connected to the load. An inverter is connected to the relay so that the relay turns inverter on. Then, larger consumers and higher voltages than 12v can be used.

  • @TakkaFlakkaFlame
    @TakkaFlakkaFlame Жыл бұрын

    Great video man, going to check my settings out to see why my battery practically dies every night and can’t get it fully charged

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Haha, awesome, glad it helped!

  • @felixfabian6559

    @felixfabian6559

    Жыл бұрын

    I have the same issue kindly assist.when my battery dies after four hours I'm in darkness

  • @Cyberhacker3
    @Cyberhacker329 күн бұрын

    Ok , so i took a "cigarette plug adapter" and wired it into the load , so my load in now powering a cigarette socket , into the cigarette socket i plugged in a 75 watt power inverter which is so small that it doesnt have a cooling fan , and therefore doesnt waste much juice when its on. And it also has 1 USB socket and into that i plugged a USB powered light bulb , so when you turn on the load it also turns on its own work lights , so u can see the top of the battery and front of the charge controller and everything else one might want to check on at night. Thank you for explaining to me that i only had 120 watts to play with there ,,,,,, that could have gone badly otherwise lol . The 75 watt power inverter is also just enough to run my modem all night if i wanted to get my laptop running to find out why my power went out.

  • @foxtrot1787
    @foxtrot178711 ай бұрын

    Does the load take power from the battery or directly from the panel?

  • @PO-sz7qw

    @PO-sz7qw

    4 ай бұрын

    The battery lol

  • @ramudzulihumbulani5526

    @ramudzulihumbulani5526

    Ай бұрын

    If you Load side 12v on the charger controller

  • @caroleemoreno8086
    @caroleemoreno8086 Жыл бұрын

    So is the output still drawing from the battery, or is it only supplied by the power of the panel/charge controller?

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    I believe the output is drawing mainly from the battery source.

  • @AliuWusu-wg6ts
    @AliuWusu-wg6ts Жыл бұрын

    Can i use the load output for my 12V DC TV while the charging is on 14.4V. thanks

  • @ScottsSolarProjects

    @ScottsSolarProjects

    Жыл бұрын

    Yes, I believe so.

  • @AliuWusu-wg6ts

    @AliuWusu-wg6ts

    Жыл бұрын

    @@ScottsSolarProjects thanks sir, cos it's normal for the voltage to go high when there is enough sunlight

  • @AliuWusu-wg6ts

    @AliuWusu-wg6ts

    Жыл бұрын

    Thanks GOD bless