I’m planning on getting one for drums and such.. your review helped confirm my decision. Thanks you!

@dadonaldd

2 жыл бұрын

Good luck - I hope yours lasts longer than mine did: 16 months. kzread.info/dash/bejne/d51pqsGnfLLNcZs.html

The channels on a sound desk are where you plug all of your mics/inputs into, the stereo out is the main output of the desk (it's in stereo, hence the name)

I’ve got one of these coming very soon. Your videos here are a critical resource already!! I plan on using this as kind of an instrument of its own for experimental music, and it was the most powerful board I could find for the price.

@TheodoreMiller

4 жыл бұрын

Good luck mate i hope you make some cool tunes

@vallyignat1781

4 жыл бұрын

nice video about behringer qx2442usb kzread.info/dash/bejne/hmWtmsWjmcqvZLw.html@@TheodoreMiller

@graxjpg

3 жыл бұрын

@@TheodoreMiller kzread.info/dash/bejne/f46ckqp7ma3Agrg.html here’s what I’ve come up with so far, watching your video again to see what I missed the first time.

@dadonaldd

2 жыл бұрын

Good luck - I hope yours lasts longer than mine did: 16 months.

Love this review. As an old guy, I am used to misleading descriptors, but you deserve a commission, because I bought this mixer on the strength of your video/s.

@TheodoreMiller

4 жыл бұрын

HENJAM48 glad you enjoyed man

Thanks for the review. I don't appreciate Behringer's deceptive naming scheme. 24 should denote the number of channel inputs and not a count of every input jack. I have the Mackie 1202 which has 4x mono, 4x stereo inputs, and 4x aux inputs, and Mackie correctly named it 1202 not 1602. I want to know how many instruments I can plug in without reading specs or zooming in on jpegs.

Behringer counts the return from aux and fx as a channel. I'm using this mixer for live broadcasts and podcasting.

This guys hilarious. Good review. I have this mixer and so far I'm liking it.

You made a mistake about the Insert I/O being only input - it's both. It's a 1/4" TRS jack. Tip is output, Ring is input, Shield is ground (if I'm not mistaken). Most of these outputs are pre-fader and return where they came out. This lets you directly monitor one single channel (by pushing the jack half way in), or tracks/channels can have their own effects loops. And remember everyone, with a tiny bit of knowledge about soldering, you can do amazing effects loops with inserts. Say your guitar is on channel 1. You make a patch panel with two TRS jacks, and wire them to just loop through. Then on that panel, have a TRS jack that splits out into a SEND and RECEIVE TS (mono) jack, and just by plugging and unplugging that main jack you can switch effects boxes. If that's too much work, you can even wire up relays to do the input switching for you, and at that point you could control that with Arduino or ESP8266s or which can then become a server for a cell phone or tablet app and you can switch effects at the tap of a screen. None of that is actually complicated, it just takes more time than someone wants to spend usually xP

@ArtGuitarLTX

Жыл бұрын

Sounds hard to me lol.

I still want to be able to have full control over my mic's and the incoming music with the mixer's sliders.

This mixer is a tank. The way you are using this mixer... I'm impressed that it's still functioning. C'mon why not use your feet to press those buttons?

@TheodoreMiller

3 жыл бұрын

When you’re used to pro equipment you get used to smacking it around, take my video from metaldays for example, I’m smacking the shit out of the tap tempo for the whole set, but it’s a pro2 so it doesn’t care

To be fair.... most mixers are a bit generous w their marketing of channels.

Thanks a lot for this review. Pls is it possible to get output from a channel directly through an assigned subgroup without also punching in the main mix on the said channel.

No, the usb only works with the main out, but the first seven channels have direct outs, so you could use it with an 8 channel interface

I have one of these, and stopped outputting sound on the headset in the main mix (only sound comes out on headphones when in pfl) when in main mix not. Any idea why this happens?

Don't know if you got it answered earlier, but the low-cut is at 75Hz.

well that depends on what interface you use with it

How do you turn on the volume when you plug in Mic. in line 1?

if i am using channel 5 on sub group 1-2 but also want channel 5 comming through the mains... do i depress the main button on channel 5 or just the 1-2 button? or both? i noticed the signal sent to mains is stronger/louder if i depress both, but another sound tech says i am doubling my sound and i wonder if this could be damaging to the board or creating a more distorted signal? (love your review btw thanx)

gota love that plastic breakable shroud around the headphone insert (Design flaw), using cheap parts, it will break off along with the nut with it.

@TheodoreMiller

3 жыл бұрын

That’s a quarter inch to eighth inch stereo adapter

Hello. Are the effects on the direct outputs on this desk or is it a dry output?

qual eveito que vc esta usando nessa mesa qual efeito que ficaria bom pra se usa

i'm wondering which stand you're using for the mixer! would be great if you could link me up! thank you!

Thanks. Very helpful info.

Is it possible for a channel to output to multiple sub groups (i.e. AND relationship as opposed to OR?)

Can you record for example 5 separated tracks at time with it? tom1, 2, 3, snare, kick

I'm looking for a desk to run 4 independent stereo in ear monitor mixes, is this desk able to do that?

Hey Friend i need you help i have mixer Behringer XENYX QX2442 where i can get Rack Mount same you have?

Would this mixer fit in a 10U rack unit?

You are very Lucky I love it Dj is my Passion

could I separate each channel in its own mixer track in FL Studio with the USB out? I want to do live recording with my band.

Just got the QX2442usb and im using it for karaoke. Does anyone know if I can assign the usb input onto a channel so i can balance the backing music and the vocals please

Very helpful thanks.

could i use this one with ableton and controlle all 16 channels?

Is it possible to monitor each channel using headphones?

What the trouble...if the colour of TAP ( green light ) is On- off-on-off-on....always. Thanks.

Can you link any of the ADAT's into it for more inputs?

E quando queima a metade da mesa,defeito crônico da fonte?

Is there only the possibility of using two stage monitor speakers through this mixer (from the AUX 1 and 2 sends)?

@TheodoreMiller

5 жыл бұрын

Yes bro

also what is the difference of using the aux sends on the channel to send signal for monitor mixes vs. using groups and sending out to monitors? i am currently running two monitors and sending different mixes by playing with the aux 1 and aux 2 directly on the channels. is this the correct way?

@TheodoreMiller

8 жыл бұрын

Yeah bro, use the aux's for monitors as they are pre fader

would this be compatible with logic pro x?

Thanks.How many built in fxs can I use simultaneously? How many channels of recording outputs can I use via usb simultaneously ?

@TheodoreMiller

3 жыл бұрын

It has 1 built in fx, and 2 channels of record out

Annoyingly no, it only has a stereo output on it, so the most things you could multi track are two, although you can record up too 24 different inputs at a time, you just have to get all the levels right in the mix

How can I download the drives for a Mac?!?

I have a question for 222222 usb Behringer for bass drum together with a subwoofer even when I don’t have the fader to 50% high the clip red light is always on and I have to turn down the fader plus the I think they call it gain control at very top then I get complaint from drummer and keyboardist. How to address this issue?

@TheodoreMiller

Жыл бұрын

The Clip light is on the mixer or on the subwoofer?

We are a new band and just want a cheap desk that we can use for live sound; is this the one?

Is mixer ki power supply heat hoti hai keya kare

What about the plug inputs on the back there lile six of them with two midi outs on back also?

@TheodoreMiller

7 жыл бұрын

Watch part three to see the back of the desk!

can the internal effects be sent to the monitors ?

I'll be using a line 6 ux2 with 2 mic input (L&R) and 2 line inputs (L&R)

it is 500 watt?

Does this have the ability to access two different FX? I see it has two FX 3&4 & it says it has a duel FX engine? Thanks

@TheodoreMiller

6 жыл бұрын

Watchman4u only one inbuilt but you can attach your own fx of choice

Bonjour, comment brancher un FEEDBACK DESTROYER PRO FBQ2496 sur un mixer X2442USB vers un compresseur SUPER-X PRO CX2310 BEHRINGER. Je suis en difficulté, j'ai un mixer X2442USB behringer, un FEEDBACK DESTROYER PRO FBQ2496, UN COMPRESSEUR SUPER-PRO CX2310 ET AMPLIFICATEUR

If you connected this to an interface could you mix each channel seperately in the software?

@malikmehouchi8418

2 жыл бұрын

The mixer has 8 outputs.....so it all depends how many inputs uour audio interface has! If it has 8 inputs you can multitrack 4 stereo channels or 8 mono channels

How many watts is it

not with the built in interface though

Looking at getting this mixer for recording my kit. Good to find this review. Wish the camera was held more still, though.

@jimnasium452

2 жыл бұрын

Had to nope out for all the camera swinging making me dizzy. A shame.

@dadonaldd

2 жыл бұрын

DON"T DO IT!!! They are notorious for breaking down! When they do, Behringer will NOT service them, even if they're under warranty. See kzread.info/dash/bejne/d51pqsGnfLLNcZs.html

Im a guitarist and want to start recording, could someone explain me what this is used for as short as possible? Just to get a feeling for it.

@jediah556

9 жыл бұрын

This is for putting a lot of different inputs into a single output.

Sorry for being a bit thick but do you still need to use this with an amp when playing live or does it have a buit in amp?

I'm using the Headphones A as my monitor out.

How many speakers you can connect? Can you use a monitor speaker?

@TheodoreMiller

5 жыл бұрын

That’s a very vague question, in theory, you can connect as many speakers as you want, it just depends how many separate feeds you need.

necesito estos videos en español

two channels max coming out you said ?

well you can record 10 Mono Channels ... SUB OUTS 1,2,3,4, + Main OUTS 1,2 + the 4 AUX OUTS could just be used for Outs .... or 5 stereo out ... even the extra headphone jack can be its own stereo out but i would recommend 3 stereo outs Max ... Subs and Mains ( i suggest you follow the pros for good info and think free ☻)

What is the difference between Behringer SX2442FX Eurodesk 24 Channel - 4 Bus Mixer $499.00Behringer XENYX X2442usb and which would you get. $319.00Thank for you time...

@gladtobeangry

8 жыл бұрын

+Shawnee845 For starters the SX2442FX has 16 mic inputs vs 10 on the X2442usb. The X2442 has a built in usb audio interface to connect to your pc for recording purposes. So it all depends on what you're going to do with it. If you're a home studio guy, recording electronic instruments into your daw, or recording jam sessions with your band in your mom's garage, the Xenyx could be the better choice. If you need more mic inputs, or you're more of a live performer than a recording engineer, go for the extra mic inputs.

I'm trying to figure out how to use this unit as a live function with both Main out and Monitor out. I figured that the Aux 1 and Aux 2 would suffice for monitor out. But All i got was Effects coming through the monitor and when I turned the effects down...nothing. Not sure what I am doing wrong. I connected the Aux send 1 to the Amp and then from the amp to the PA speaker. I will try again and see what happens tomorrow. But any ideas would be appreciated.

@TheodoreMiller

10 жыл бұрын

It sounds to me like you were using aux 3 and 4 instead of 1 and 2

@gamhazell

10 жыл бұрын

I got it fixed...the pre wasn't engaged. Thanks

@gamhazell

10 жыл бұрын

omendrummer How do I get effects in the aux send when I m using them as monitor mixes?

@TheodoreMiller

10 жыл бұрын

you can only run the effects out either the main, or aux one and two,the only other way to do it would be to rout the effects out of the mixer andback into one of the stereo channels

@gamhazell

10 жыл бұрын

Ok. How would I route the effects out of the mixer? What ins and outs do I connect the cables to? I don't have any external effects I'm using the onboard effects. I get the effects in the mains but no effects in the aux sends? I always use aux 1 for monitoring.

hello, please i have question. if i connect Trs to 1/4" Male TRS to 1/4" Female TS Insert Direct-Out Adapter ? can change insert to work a direct our ? or sec ,way if i connect TRS male to adapter Ts female to trs male. can change the insert to work a direct out ? i have the same mixer ?

@TheodoreMiller

Жыл бұрын

Doesn't it already have direct outs?

Hi thanks, does this mixer fit in standard 19" rack? regards

@TheodoreMiller

2 жыл бұрын

It does

Cool review.

@TheodoreMiller

9 жыл бұрын

Cheers man

oooohhh ☻ True , i dont use the built in , have you seen the new x32 Producer , and Compact ? . im thinking the Producer version or the echo audiofire 12 in out interface for 1100 cheaper lol and buying more of these , x2442's im not sure ☺

Hmmm.. I don't think you knew how to use one knob compression 😅 it's really useful if you knew how to use it. I've been using it for less than a year and i am not disappointed. Ps. We are only using basic setup for our church, this mixer, a basic amp and 4 500watts passive speakers.

Where can I get your rack mount ears for this mixer?

@TheodoreMiller

7 жыл бұрын

Frank Tomassini They come in the box when you buy it!

could i possibly get fx through my monitors AND mains by selecting effects to go out to group 1-2 (instead of mains)? i thought the signal i send to 1-2 goes out to mains after? maybe if i de-select the main buttons on all channels... (ex. channel 1,2,3,4,5,etc is sent to group 1-2 but not to mains)

Bonjour , je veux la version francaise s'il vous plait

Is it possible to turn off the effects for audio?

@TheodoreMiller

6 жыл бұрын

Yamael Gomez yes

@jesufrito9617

6 жыл бұрын

Theodore Milller How so?

i've never really understood, what is a subgroup?

@victorhannes8627

8 жыл бұрын

Thank you sooooooo much! it was very helpful!

Does it come with the rack mounts?

@TheodoreMiller

2 жыл бұрын

Mine did

why on earth do you think it has usb connection then?

Can you send audio from your daw to the mixer and mix the project on the mixer and when you're done send the final mix back to your daw?

@TheodoreMiller

5 жыл бұрын

No you can not

Hi, nice demo! Very basic question: can you actually record all those channels independently and simultaneously without latency via use to the computer? (Multi-track recording). How do you send daw sound back into the mixer to your monitors?

@TheodoreMiller

4 жыл бұрын

No you can not, the usb function of the desk is just acting as a 2 track recorder/interface

@malikmehouchi8418

2 жыл бұрын

Hey, as far as im aware this mixer has 8 seperate outputs so you can mutitrack recording into DAW though multi inputs on your audio interface. Obviously it all depends how many inputs the interface has. Having the 8 outs is the main reason people go for this mixer as it will allow seperate multi track recording

How many watts can it hold

@TheodoreMiller

3 жыл бұрын

Its an unpowered mixing desk, meaning you need separate amplifiers to run your speakers, or powered speakers

can you multi track record with it?

@TheodoreMiller

5 жыл бұрын

No, just stereo 2 track

Thanks-Good review it’s just camera is jerky. Makes me nausea 😂

Does this have the voice cancelator

@TheodoreMiller

8 жыл бұрын

+Jerry Hall Cancelator?

Is this an analog or powered mixer?

@TheodoreMiller

8 жыл бұрын

+lucasthebull Not quite sure you know what you're talking about. It's an analog mixer, although it does have a digital effects unit built in. If by powered you mean has an amp built in no it does not, you either need a separate amp if you're using passive speakers, or you need active speakers. I hope that helps clear things up, let me know if you have any other questions. Cheers

The USB on this desk is not good- seems like an afterthought. 1. You can't alter the volume of the audio coming in from USB and it's massively too loud. You have to lower the sound on the PC and hope to god you or an app never turns it back up or you will be deafened. 2. To hear the audio coming in from USB over the main outputs of the desk you have to press the "USB to main" button but doing that means the main mix is no longer sent from the desk over the USB out (to avoid feedback I suppose). This makes the seemingly simple scenario of playing a drum track on your DAW and jamming along to it on a keyboard plugged into the mixer and recording it over the desk's USB output impossible. The only way to do it is to listen on headphones on the desk, the main output of the desk will only be playing the synth you have plugged in (the main mix); the audio coming in over USB (your drum track playing in your DAW) will be muted. There are other issues I'm having but I've only had the desk I day so I could be doing something wrong.

IS THERE ANY HEADPHONE OUT PUT

@TheodoreMiller

8 жыл бұрын

+blacksteep vevo YES

do you recommend this for studio work ?

16bit... ? premium? 24bit fx..?

Can you record your drums in separte channels?

@TheodoreMiller

8 жыл бұрын

+Richard Suarez Nope, just the two with this

@TheodoreMiller

8 жыл бұрын

The inbuilt interface will only record the LR out, so two channels

Can this unit multi track record?

wele kanalen zijn stereo kun je dat uit leggen

it's not a midi desk, it's a sound desk

I have a general comment about all mixing board reviews. It would be best if the presenter spends a few months using these mixers before they instruct as to how to use them or review them. for example, this reviewer isn't sure but believes the low cut buttons cut low frequencies at 80Hz. In actuality, it cuts 18db per octave beginning at 75 Hz. See, I haven't quite received my mixer yet...(next week I will receive the QX2442 which is a step above this one. The latest). I did tons of research on this board b4 I even ordered it. Also I have not found a single COMPLETE tutorial on using I downloaded the manual a week ago so as to be able to hit the ground running. Just a word to the wise. Research and practice before you make a video!

@TheodoreMiller

8 жыл бұрын

Yeah good point bro, these mixers are so straight forward a newbie could get this running without a manual.

Well then you will get whatever you decide to plug into it :P

Ada yg Indonesian speak?

Je vais finir par apprendre l'anglais car il n'y a rien en français !!!

Sweepable Mids.

Je veux français stpl

The knobs on this mixer are NOT high quality! After a short period, they will become very scratchy and noisy.

enfoca la camara para la prox flaco

@TheodoreMiller

11 ай бұрын

You're 10 years late mate