Behringer X32 - Internal RTA & Specrograph Overview
This video will cover the new internal RTA that is part of the Behringer X32 V2.02 firmware update. You can find the 100 band RTA on the Meter Page and as an overlay of the EQ and GEQ screens. You can select this as a Pre or Post EQ.
If you haven't already, make sure to check out my new website dbbaudio.com for the latest news and updates!
Пікірлер: 64
great videos Drew! just wanted to say thank you...you have helped an x32 newbie get around the board a lot quicker! Get ready for the next software update....were going to need some more help! :)
Thank you brother! i was waiting somebody to upload a video of the new and final version 2.xx. God bless you and your ministry
God bless you Drew.. Thank you for all of your videos you put out.
Excellent job on the v2 videos! I just installed Sunday after service after i backed up scenes. Thanks for taking time. I would love to have u make videos on the actual gate/compressor & eq settings u use per instrument on the x32! :) You have really good presentation skills.
Thank you so much, love you man. Appreciated so much you have no idea.
Drew, awesome videos! Love the help you are giving me and our Church. I do have a ton of questions and you seem to be the man who knows this board extremely well. How can I pick your brain and get a small moment of your time???
Thank you...my church just got the X32 behringer and this quick tutorial is the best from #Ghana
i love your videos! soo much help god bless you drew.
@ThaylorHarmor
5 жыл бұрын
God*
Great video, such a great tool!
Good representation!!
Very cool thanks, just starting to learn on the X32 from a Presonus 24..
Nice presentation.
I learned something!
Thanks Drew
Thanks for all that you do ...Drew... all the way from Hawaii. New Hope Leeward Christian Fellowship on Oahu.
hey drew , Can you used the RTA on the iPad ? and thanks for all your hard work.
Thnx drew
How to use both x32 for FOH and x32 compact for Monitor stage mixing? Also both Behringer boards has Dante cards. How to use ulxd4q with both boards as mentioned?
thank you brother
@DrewBrashler
8 жыл бұрын
Juan Olvir Fragozo You're welcome! Feel free to take a look at my new website www.dbbaudio.com where I have a forum for a quick way to ask me questions! I find KZread a bit clumsy to keep track of. Thanks so much for watching my videos!
Hi there. Is it possible to send pink noise to the main outputs of the X32, connect a measurement mic to one of the mic inputs and use the RTA on that input? Then use the graphic EQ on the master outs to do room correction etc?
@tonymtz1
7 жыл бұрын
I have the same question, please let me know if you figured it out, thanks!
Hello, thank you for this video. How could one get spectograph and bar graph on the IPAD app plz?
Drew, much thanks for your videos, we use them as tutorials for our church audio staff. We were wondering when you do get feedback, the best way to isolate where the feedback is coming from? We thought the RTA was the answer but, as I understand it, you have to be on the right channel already to see the offending frequency, which caused us to wonder about finding offending channels. Thanks much.
@gnicholas1970
7 жыл бұрын
I have the same question. Was Drew able to answer it for you?
@zstanman482
7 жыл бұрын
No, he never answered it. I'd still love to get an answer though.
@BobJones-bh9qz
2 жыл бұрын
You could look at the rta on the main stereo bus and look for any weird spikes
@CAMOAH1
Жыл бұрын
From my experience of 10 years using X32 @ church ...this tool has not been provided on all digiboards... But is something that would make life easy for newbies. From my experience .... 1st eliminate feedback by pulling back on main n all auxs n back to a level that does not produce feedback.... (Feedback are caused by wrongful handling of mics, so check if a singer is not directly pointing mics towards FOH or monitors .... ) If it's not d likely source then 2nd go to meters to guess the likely source / channels ...WHICH ARE USUALLY MICROPHONE & PROBABLY ACOUSTIC GUITAR PICK UP SOURCES .... 3. go to ur suspicious tracks/ channel n engage the spectrograph to find the offending freq - which are usually red in colour 4. Use unused parametric EQ to notch / reduce that red offending freq till it's no longer red 5. If u have used up all 4 channel parametric EQ ...look for the closest n adjust so that the curve comes closer to the the point or on d point where the offending frequency is NOTE....From the meters ...any channel who's preamp level goes beyond the green - to yellow n especially to red, is likely to contribute to the feedback ....so u press n study d meters on the right side of the screen ....then u guess those likely sources .... Having done all above to bring feedback under control ...check placement of FOH n monitors and proximity of naked mics to same ...e.g if a singer is standing in front of speakers or monitors....or if FOH are not placed/ angeled well u take steps to address dt. Finally, feedback may be as a result of poor ringing of channels n entire mixer ...so u check ur auxs ...also using spectrograph n remove red offending frequencies n do same on d overall LR EQ (Be careful with overall EQ - just slightly pls). But I agree ...this function will be an important resource on a digi board for newBs. Am sure the brand that adds this feedback detection functionality can get lion share of market. I know it's been experimented in QSC digiboards and it's a function on dbx drive racks
I'm trying to decide between the QU-24 and the Behringer X32, my main question is since I will be mainly using this for production studio purposes is that will the motorized faders react to the automations parameters in the DAW as it would if it were on the console - I haven't seen a video yet that demonstrates this.
@bisonrobinson
7 жыл бұрын
In the end, what you decided?
How do you access the analyzer on the BWING and how do yo add additional talk back mics for the musicians?My name is Martin Parker from Rhema Fellowship Church in Cleveland Ohio.
Can you access the RTA from the iPad/PC remote control apps?
Drew... is it posible to use the same libraries (ej. scenes) with this new version?
Awesome thank you Drew. Can you make a video on how you have reaper connected in to the board. I have it but cannot make it work.
@DrewBrashler
10 жыл бұрын
Hi Peter, look through my latest videos and you will find a video I made with setting up the X32 with Reaper.
@snoolee7950
9 жыл бұрын
Drew Brashler Great! Thank you.
Hi Drew ! How to turn this RTA/Specrograph off on the EQ channel ?
@zackzack0815
3 жыл бұрын
yeah, that'd be nice
Question. Why can’t I see nothing in the spectrograph? My mic doesn’t show at all. It only lights up under the channel and M/C SOLO but not graph
Hi, are the hold scenes compatible with the new firmware? Thx!
@billyghawaii
10 жыл бұрын
I believe that is correct... see the release notes for v2.2. Also they recommend updating from 1.5 incase you are on 2 beta
Is it possible to view the RTA for Master/All Tracks or only the 1 selected track
How do you overlay rta on the X32-Rack?
The display can also show feedbacks above 15 kHz
Does the x32 producer have this rta?
hey is behringer has a built in feedback suppressing?
@DrewBrashler
7 жыл бұрын
No, the X32 doesn't have an automatic feedback suppressor. Thanks!
@carlotheatheist
6 жыл бұрын
how can we eliminate feedback on it? can w just configure it on mixer?
Can I use an external rat microphone?
all mixer can be like this??
Does it have a de esser?
Can you get the RTA on the ipad app?
@snoolee7950
9 жыл бұрын
rdguitar I saw on the Apple store thing that there is a 3rd party X32 RTA type app for sale for $9. or somesuch, FYI. Btw, e'erybody says the Android X32 remote app is much better than the iPad app. I think some outside person from Europe wrote the Android app and contributed it to the world for free in the Free Open Source Software FOSS tradition. i.e. dump the iPad and use Android, the way it is supposed to be.
Q: Did the V 2.02 cause you to lose your scenes?
@DrewBrashler
10 жыл бұрын
Yes it does erase all the data on the console, so make sure you back it up.
@Webringthepartyllc
9 жыл бұрын
Drew Brashler How did you back it up? I heard that backed up scenes don't work with the new version. So I've been putting this off for a while now.
Is this update stable?
@DrewBrashler
10 жыл бұрын
It is an official release from Behringer, not a Beta. So as far as I have used it, yes it is stable. I don't think Behringer would release it if it wasn't stable.
@EldredMerricks
10 жыл бұрын
Thanks
@jber73
10 жыл бұрын
I just did a two week tour - 16 shows in 14 days - with the beta version and it worked flawlessly. I'm sure Behringer wouldn't have released the official version if it weren't fully tested, so I think you are safe to go ahead with it.
@EldredMerricks
10 жыл бұрын
Thanks J7C3B!! Now we patiently anticpating the IPAD and MAC update for this version..