No video
Behringer FCB1010 Simple Setup
If you're like me this was the biggest nightmare on the planet. I only wanted the most basic programming possible and couldn't find instructions anywhere. All I wanted was the 10 buttons to send MIDI CC messages and the expression pedals to work. No banks, no Program changes, etc..
Hope this helps someone who's ripping their hair out!
Пікірлер: 97
You sir are my hero. I was trying to get this controller to simply change channel on my lighting system and failed for so long. Doing what you said in your short video was the answer. THANK YOU! I honestly want to buy you a steak dinner gift certificate or something.
@MontyDeane
4 жыл бұрын
Send that steak dinner to me. Outback? Or Ruth Christs?
@originalfallinggirl
2 жыл бұрын
@@MontyDeane and I’m gonna be going to dinner with Monty so please add another steak to the list. Preciate it 👍
I've put many hours into this device to find out how it works. You have explained it briefly and clearly. Thank you very much!!!
1:03 if anyone was stuck on how to "Get rid of 1" like I was, just hold it down and it'll go off, to get 10 hold it down until the LED comes on and it'll work as well :)
Dude. You are my hero. If I ever get a poster of you, I'll hang it on my door.
I've had this for like 8 years wondering how to use the thing. You showed me all that I needed to know in just a few minutes. Thank you,!
Of all the videos i watched on this topic yours was the most helpful and quickest. Thank you! 😊 I'm using mine with Quantiloop app and Ableton live. Loving it.
You hero! I've searched for hours and read loads of forums and manuals and all that shit and THIS is EXACTLY what I needed to know! Thank you! You've accomplished your goal with this video!!
Thanks for your explanation, now I'm a lot further along using the FCB with VCV Rack, a software modular synthesis environment. I had a problem with Exp Pedal B, it didn't seem to be working no matter what I tried. Finally I put the unit through the pedals calibration procedure described in the User's Manual. That fixed the problem, now pedal A transmits CC7 values and pedal B transmits CC1 values, programmed as per your instructions.
That is so helpful. I was trying to figure it out from the manual and it is the most confusing thing ever! Thanks!!
This saved my Bacon! Needed it for running the iPad click track for Sunday mornings, and all my settings got washed Thursday night somehow. There were no pedals available to ship in before Sunday! But this fixed my problem, Thank you!
Yep, this was what I needed. After almost a week. THANK YOU!
Duuuuude thank you so much this helped me maaaaaany times more than you can know
Thanks for the help :-) quick and straight to the point. Cheers.
This is the kind of instructions that companies should include in the manual: a specific, quick guide to the simple things most people want to do first. Don't make us learn the entire system before we can do the simplest thing. Give a separate section on the basics, THEN go on and tell us how to do the fancy stuff.
THAANK YOU SIR!!! finally easy, kept short and all info i wanted. No tech nerding or terminology, that requires an english skill out of my league. Awesome dude Behringer should pay you XD
This was so helpful, thank you!!
What an absolute champ! Thank you.
Best information I have found so far, but I am still missing how to get Guitar Rig to recognize/assign the expression pedals or channels I would like the FCB to switch through. But this did help a bit.
@Mogford
3 жыл бұрын
Did you ever figure this out?
Dude... Thaaaaank !!! That exactly what I needed and it took 1:46 to understand
YOU ARE A LEGEND
Like your socks...
These things came out years ago and weren’t very well designed for Midi integration. They’re built like a tank and function well, but they are very limited and programming them is a nightmare. These probably work best with old rack units from the 90’s.
Hey can you tell me the steps to get to your initial setting? When I turn on, I only have reading of '4', not '04', and the expression pedal lights are off - thank you!
Okay. This now kind of works with my Fl Studio. Just trying to turn on and off some stomp boxes in it but it's still super strange with these steps even, gotta press the pedal multiple times and it doesn't always work. Thanks for the starting help though. This is the worst piece of gear I have ever bought in terms of ease of use, but seems powerful if I could just get it to work properly!!!!!!!!!!!!!!!!!Ah!!!!!!!!!!!!!!!
Help me please, whenever I'm in the preset select all 10 banks are lighting, when I hold down any one all 10 banks come off and I can't get them to work separately. I really need help.
My brain just exploded like a damn frag.
Thank you!
how do you get the expression pedals to be recognised by my nova system. ? i move the pedal up and down and the dot shows on the nova display but no value of delay changes? the nova is set to cc 16 no
You are amazing! Can anyone tell me how to assign a channel to the expression pedals? I messed up and programmed one of my switches to 27 and now I can't use the left (or right) expression pedal. Thank you so much!
Hola, que tal? Me gustaría saber se además de todas las configuraciones de cambios de efectos, volumen, etc. se podría también tener acceso a la sección de grabación como: PLAY, REC. ADELANTAR, RETROCEDER, MONITOR, BORRAR TRACKS ETC. Seria posible con el FCB 1010, para poder tener las manos totalmente libres para estar siempre en la guitarra? Esto para mi seria Super. Muchas gracias.
THANK YOU.
perfect! thx
Thanks, I agree, it is a nightmare. The foot pedal also seems to have multiple note commands so every time I hit the pedal I get a different midi message, how do you fix that?
This is awesome , I can easily change between presets on my amp (there are 25) I am still struggling to get it to control my analog pedals as well but Ill get there. Thanks for helping a rookie out :)
Hi! I have a question about fcb 1010. I read instruction, but I can't find a tip how to save a preset (from my synth) on my foot controller. Can you tell me what is the easiest way to save a sound on fcb bank? I just need to quickly choose the sounds that i am interested on.
Thanks , this is all working now with Cubase.
Thank you.
That you! You helped me. The manual made no fucking sense whatsoever.
Does anyone know if this can act like Taurus pedals and send midi note on/off to a synth? Thanks!
This still helps a lot but actually like this the FCB Is sending not CC but Notes :)
do you know why the dot next to the channel number to the left keeps flashing i cant turn it off
will this foot controller work with a Rocktron Prophesy II?
I have a question. I want to be able to create presets on a midi controller that can send multiple messages with one button/preset. Say I make preset 1 on bank 1 send a message in channel 1 to make my preamp go to #1 but it also sends another message in a different channel which tells that rack unit to #2. I was wondering if that’s possible with this midi controller?
Can this pedal be used with a Roland Fr4x digital accordion ?
Can you explain how to program the midi channel and then the cc numbers 118 and 119?
How is it hooked up to the computer. My Mac Studio isn’t recognizing mine
Best tutorial ever!!!!
Ok....what should I do if there are just 8 and 9 highlighted?
Hi Guys, I need help. I'm using FCB1010 with Amplitude 4 in a standalone fashion and thanks to syx files I get from online, it works perfectly. However when I open AT4 as a plug-in on Logic Pro X, it does not see FCB1010 and when I press buttons on FCB, nothing happens. (Btw I am new to Apple and Logic Pro) is there any way or settings on Logic to solve that issue, or do I need to do something else? Any help is much appreciated. Update: I've changed my FCB1010's midi channel as "2" by using on-board controllers (footswitches, no editor used) still, no joy 🙁 Cheers
Is it possible to use to boss Ve20 vocal processor? Or any recommendations?
Hi i need help!.... my fcb1010 not have eureka, my first questions is.... is this required for connect to biasFx mobile?...... if not, how to program my pedals toggle with this midi foot controller? i don't understand the midi number. I hope to you can help me...thnks
I don´t want to have programchange. Only snippets on our X32 mixer and this is midi channel 2 on the mixer. Can you make a simple film about this configuration. Snippets on the mixer is 00, 01, 02, 03, 04, 05, 06 and so on
"Hey you know what would be hilarious? Not putting a function manual in the box for this thing"
Thanks man although I'm using Amplitube...and while it can turn the pedals on, a subsequent press of the button assigned doesn't turn it off. LOL! So it can only turn it on...guess I have some more research to do. Why is this so difficult!?
@xigen
5 жыл бұрын
Yup. I am in the same boat. Plus - I am having trouble getting the looper to start/stop/play.
ableton shows it recieves the midi notes but mapping does not respond at all
Hi, I realy Need you,r advise :) I have 1010, I just do the basic, Like start stop, Expression etc. But i donno if the Firmware is newer than you,rs, Can you help me out pls
My pedal B gives no midi signal. I dont understand why.
Any idea how to program the FCB1010 to be able to use the expression pedals with the Behringer FX2000 effects controller. There is NOTHING written about using these two same mfg products together! Pulling what little hair I have left out of my head...
i just got the fcb1010 haven't figured it out yet, i just want to use it to control my overloud thu plug in. did you need to install software to get the fcb1010 working?
@samanthapanco9038
5 жыл бұрын
HEY! I just got this to do the same thing and FUUUUUUUDGE what a nightmare, did you get anywhere with it? Please if you did feel free to email me, xxxdougmastersxxx@gmail.com
What midi to PC unit are you using?
I'm sorry but 8 9 and 10 are never lit...do i have to reset the controler first ?
Okay, so now it has the preset I want, but how do I make it USE the preset? How do I leave bank editing mode and go to use the stupid controller mode?!?!?!
I'm trying to do exactly what you're doing, but failing. You start out with "04" on your screen. How did you get that? When I punch in "04" then hit any of the switches (e.g.: 8), the number just changes to 8 and is waiting for me to enter some other number. Could you please provide a list of steps starting from "Turn on the power switch"? Just a simple list of Step 1 - do this, Step 2 - do that..."? I just need the bloody expression pedals to work and I'm about to smash this thing to pieces. Thanks for any more detailed info you can provide. Save us all!!! ;-)
@moonshine7374
5 жыл бұрын
you just press up and down to select banks from 00 to 09
Can you send an Amazon link to your socks?
Is this for stock firmware, or uno chip eurekaprom? It should say such in description.
I bought this on the way now.. is upgrading the chip really necessary ?
@Kipp274
3 жыл бұрын
Nope, thought so too but it works just fine the way it comes.
so 1 is 22 then two should be 23 and then three should be 24? is that how??
If this is easy then you are Einstein
Following exactly, but 10 does not flash. Very frustrating.
@jeremybabin7435
2 жыл бұрын
Got it dude - double tab it quickly. 💪
@jeremybabin7435
2 жыл бұрын
Here I am coming back to this, still works
Can i use this on a Line 6 HX stomp??
@adityabali1939
3 жыл бұрын
Yes
Get The Eureka PROM 3 Chip . You WONT Be Sorry. Very Easy To Navigate. Very Easy !!
the procedure doesn't work for me
I have absolutely no idea why you have the number 22 set to 1, why can’t you have 1,2,3 etc
so its useless to lamen?😊
What why how!? Lol 1,8,9,10 what are the reasons for these numbers? Why do you have to punch in an arbitrary number like 22 on number 2 why is every German product so bastard complicated!?
@hectoreduardofuentealbapel7830
4 жыл бұрын
Chineese. The guy used 22 as an example
@PatrickStefan
3 жыл бұрын
22-31? are some of the standard blank midi channels that are left unassigned for custom operations exactly this. Using 22 or below will affect other operations
The arrows on your sock Are going the wrong way .... Yuk yuk yuk
Wait, what? What are you even doing? Or setting? So I am sup. to tune every single switch to get rid of 1 and light 8-9-10? Wtf? Why?
@Lespaulman987
Ай бұрын
Read the manual
@MrSocko-bh1jb
Ай бұрын
@@Lespaulman987 Stroke of genius. And there I was thinking this video was sup. to be informative, or even helpful. Silly me.. ik. Fyi, this pos has probably the most complicated and unintuitive controls I ever laid eyes on. And I built AND programmed everything from a PC to a 3d Printer. Not even mentioning the fact my comment was probably a year old at least when you "shared your wisdom", so your enlightening answer is perfectly irrelevant rn anyway, I was busy reading the Sextionaire to your mummy, so I was busy indeed. js. Greet her from me, will you?
@Lespaulman987
Ай бұрын
@@MrSocko-bh1jb Lmao epic response. I just got one of these as a cheaper alternative to my Xsonic Airstep. It's not as simple as the Airstep, but not rocket science. The switches you mention basically tell it to send PC, CC, or Note data. Note data is the simplest to deal with so that's basically what he's setting it up to send. The other two lights tell the expression pedals what to do. What made this thing make sense to me is learning that each pedal is actually a "preset" for an old school midi rig. So instead of each switch sending a single signal (kinda like the Airstep) it send a whole range of messages at once. Or can turn most of those messages off, as the vid basically shows you how to do.
@MrSocko-bh1jb
Ай бұрын
@@Lespaulman987 Oh wow. Thank you sir. I mean... I would have prolly appreciated that info 2 years ago, (minus the "read the manual" part that is) but like I already said, it`s not really relevant anymore atp. I found a cheaper, better and more user friendly alternative a long time ago. My point still stands: Unintuitive and needlessly complicated! They could have just paired that pedal with a nice software for example. Like any piece of whatever device you wanna name has these days. Wild idea, I know... I am not gonna lie, midi pedals are not exactly my forte. Plus I am not a native english speaker,... so there`s that too. But if you are mr.know it all, why don`t you make a video to show us peasants how it`s done? Maybe I am gonna find out where I put the damn thing 2 years ago, and give it another try.
Psh... whaaaaaaaat????😢
Thank you!