Thanks for watching! For anyone new here my show has had quite a few upgrades since this video. Most of the mechanics have had a ton of rebuilding and adjusting (to keep things more reliable) and the show overall runs with very little issues. Some other cosmetic changes include some minor new clothes on the characters, some changes on the backdrop, and a few minor “polishing” to keep things looking a bit more finished. I have also redone Monty’s mouth mech (as you can see in this video: kzread.info01a8Y0Jo80Q?feature=share I have also furred carls snout so it doesn’t look all boxy anymore and you can see that here: kzread.infoYADtYHoFsPQ?feature=share And most importantly, I am now running my show automatically by using an Arduino, relays, and Vixen lights controlling software. If you’d be interested in seeing that in action here’s a link to that kzread.info5bjwDC7Jtzs?feature=share Anyhow, if you’ve made it to the end of this comment I thank you for your interest. And of course I appreciate everyone checking out this video :)

@drobotics2205

2 жыл бұрын

It's so cool that you went from RC cars to puematics within one year!

@adamkowalski1226

2 жыл бұрын

Looks like it is now more complex and pricey for me to do it for myself with custom characters But it is pretty cool

@adamkowalski1226

2 жыл бұрын

@@fnfplayer6723 his name is simon

@S.J.C._Entertainment

2 жыл бұрын

@@fnfplayer6723 Knex.

@fnfplayer6723

2 жыл бұрын

@@S.J.C._Entertainment thanks i remember i played with it before but did not remember the name so thanks!

I remember back in 2017 you were considered a genius if you used pneumatics in your homemade animatronics lol

@S.J.C._Entertainment

2 жыл бұрын

Cec stages was pretty popular and started the RC car method and everyone used that because it was so simple. Even my stuff used it till I finally re-did it everything.

@rock_afire_boi6211

2 жыл бұрын

@@S.J.C._Entertainment than cc animatronics used dc motor gear shafts

@creaturesaurus9926

Жыл бұрын

I use rc cars too lol

@360101

Жыл бұрын

I use RC cars for my big mouth Billy Bass

@Dogstersanimations

Жыл бұрын

I hate doing it manually but it’s easier than learning how to use pneumatic system

Looking smooth with those flow controls!

I didn’t know you used this! This is actually quite amazing for fan made animatronics!

Wow this is nice! They actually seem pretty complex!

@S.J.C._Entertainment

2 жыл бұрын

That means a lot coming from you!

You’re a genius. This is crazy impressive.

It's Amazing how animatronics work

Wow i love seeing the mechs of animatronics it's so cool

Thanks for doing the update on how your animatronics work

Thanks, I Always Wanted To See There Insides!

Hey man! It’s really cool to see your animatronics. You’ve actually inspired my show a little bit. Maybye sometime we could do a collab?

@S.J.C._Entertainment

Жыл бұрын

Possibly!

Oh WOWWW that’s amazing

I’ve been seeing a lot of your videos for a while and I wanna say you have inspired me a lot 😊

Thanks so much! Totally Amazing!

Oh yay you made it! pretty cool

Sorry I’m late but this is very cool because we get to see how your animatronics function! Have a good day!

Awesome!

Amazing!

wow that's awesome

Bro becoming William afton irl💀😵‍💫

U inspired me i will build animatronics too

ain’t no way bro uses knex that’s just awsome

Makes me wanna do my own homemade animatronics

Woah cool

Great job,:]

this is epic

I love that sound

cool

Could you possibly do a tutorial on how you made these or how you set up your shows?

@S.J.C._Entertainment

Жыл бұрын

Probably not. Although the setting up shows things a possibility.

Omg this is nice. btw ima use a rc car For my animatronic and buy all the stuff

Wow can you show me how to do that cool dude nice

Btw cool animatronics

@S.J.C._Entertainment

Жыл бұрын

Thank you.

Caraca Que animatronic lindo cara

yaaay i have requesting this

Wow that's how they work i think Carl and Simon use old rc car

what air coupler or what size air coupler do you have? the one that goes inside the solenoid through the air compressor.

@S.J.C._Entertainment

Жыл бұрын

I genuinely forgot

That's actually crazy how did you learn everything?

@S.J.C._Entertainment

Ай бұрын

Internet.

Do you think you could do a tutorial on how to hook the valves up to the cylinders?

@S.J.C._Entertainment

Жыл бұрын

It’s pretty self explanatory. But I’m sure you could find other videos online

I control mine like puppets

Interesting to which hose goes where. Also, do you have any tips for how I can up my channel's subscriber count, because it's been at 221 for awhile.

@S.J.C._Entertainment

2 жыл бұрын

I’m not really the person to ask that haha I’m sure you can find some videos on how to grow your audience tho

@MeccaFatz_and_Friends

2 жыл бұрын

@@S.J.C._Entertainment Ok, thanks

😮

3 months late bruh 💀 But i didn't actually noticed those New mechanisms!

Nice! are you still using the RC car method

@S.J.C._Entertainment

2 жыл бұрын

No lol

@Sea_of_Waves

2 жыл бұрын

Looks like someone didn’t watch 5 seconds into the video

I built my own mini robot hand unit

I watch the same video Everyday

Cool I like the flower you made of felt do you think you can tell me the name

@S.J.C._Entertainment

3 ай бұрын

Jubilee.

@Burrito23964

3 ай бұрын

Thanks

🥳🎊🎁✅️👍

How do you make the moons mouth move without it looking weird?

@S.J.C._Entertainment

Жыл бұрын

Idk

Can you send a link to everything you use?

@S.J.C._Entertainment

Жыл бұрын

TAILONZ PNEUMATIC 32mm Bore 200mm Stroke Air Cylinder Double Action with Y Connector and 2Pcs 8mm Fitting MAL32x200 TAILONZ PNEUMATIC Blue 6mm OD 4mm ID Polyurethane PU Air Hose Pipe Tube Kit 10 Meter 32.8ft Baomain Pneumatic 1/4" Solenoid Valve 4V210-08 DC 24V 2 Positions Base Quick Fittings with Base Muffler Set

You need to get the pico boo mp3 you can program and add audio on your computer and shows go on a as card but you’ll need a lot of those for each show there’s menu music and then when you hit play it plays the show

So cool! But do you think you could tell me the brand of the valve bank?

@S.J.C._Entertainment

Жыл бұрын

First result on Amazon

@bambooplushproductions6339

Жыл бұрын

@@S.J.C._Entertainment thx so much man.

@S.J.C._Entertainment

Жыл бұрын

@@bambooplushproductions6339 no problem

When's bones getting his glowup 🤪

And Scott says that kids can fit in there XD

@S.J.C._Entertainment

Жыл бұрын

Definitely not in mine haha

@swagdoge6428

Жыл бұрын

@@S.J.C._Entertainment lol

How do you make the endoskeletons?

@S.J.C._Entertainment

Ай бұрын

Wood.

Great job. I see you have the flow controls now. I sew you live show and I was going to tell you that you need to decree the airflow that was why you were having trouble. because your animatronics are made out of cardboard and thin plastic parts the hi parser was wearing them down.sorry I did not get back to you sooner on that. You are on the right track /your airflow on the mouths and stum arm needs to be a little lass /and then your moon will go up better and you won't get ware and tear on your animatronics parts. This way they won't break down as much. They will be going strong. good luck and I can not wait for your next show. RG Jubilee.

Hey i have a question: do you still work work with Misallanious Joe?

@S.J.C._Entertainment

8 ай бұрын

He’s my brother lol.

@raminshahlai829

7 ай бұрын

@@S.J.C._Entertainment O lol now I remember

Now how old is this dude bc hes a genius

@S.J.C._Entertainment

Жыл бұрын

Can’t give out my exact age, sorry.

@TheOriginalZeazin

Жыл бұрын

@@S.J.C._Entertainment thats alr dude

whats a good software to use to program then to audio

@S.J.C._Entertainment

Жыл бұрын

I use vixen lights. That works fine.

@DougCraftOfficial

Жыл бұрын

Found nothing about it on KZread

Where’d you get the Mac valves?

@S.J.C._Entertainment

2 жыл бұрын

Amazon.

@YBP23

2 жыл бұрын

They like 22 usd

What equiptment did you use

@S.J.C._Entertainment

Жыл бұрын

Pneumatics

@SonicShow2

Жыл бұрын

Thanks for letting me know

Btw I'm the one who called the oddballs group "sus"

@S.J.C._Entertainment

5 ай бұрын

Ok?

Quick question. Do you manually operate the shows? Or do you have anything that programs the shows? Also I would love to see an actual full animatronic of all of these guys!

@S.J.C._Entertainment

Жыл бұрын

I’m currently in the process of getting a programmer running. Also what do you mean “full animatronics”?

@heftyjerm2104

Жыл бұрын

@@S.J.C._Entertainment Kinda like the kinds of the rock afire explosion. Arm movements, rotations, neck movement, ect. I know you aren’t doing many upgrades currently, but this seems like a goal that you may be striving for

@S.J.C._Entertainment

Жыл бұрын

@@heftyjerm2104 as cool as that would be, that would be WAY out my my budget. While I do plan on adding some new movements sooner then later it’ll never be anywhere near Rockafire standards.

My dude using knex.

Do you have to control the animatronics with those buttons or can you program it? If you can program it please tell me how to set it up

@S.J.C._Entertainment

10 ай бұрын

Programed. I’d recommend looking up videos since it’s a bit hard to explain briefly lol.

@B0UND3D-Roblox

10 ай бұрын

@@S.J.C._Entertainment Can you link one that is helpful because I don't know what to do? sorry!

@S.J.C._Entertainment

10 ай бұрын

@@B0UND3D-Roblox kzread.info/dash/bejne/ha2dj6xsj9nJdrw.htmlsi=QhgNhVqvWt6RhfTk

What do you use for the mouth and arms

@S.J.C._Entertainment

Жыл бұрын

Pneumatics

@S.J.C._Entertainment The moon is less creepy than cec

Can you show how you wire the solenoid to your pc

@S.J.C._Entertainment

Жыл бұрын

It's not wired to a PC

@finthefnafgamer5433

Жыл бұрын

Oh the solenoids were lit up so I thought it was

@S.J.C._Entertainment

Жыл бұрын

@@finthefnafgamer5433 thats a reflection

how do you get the LEDs to work on the valve bank?

@S.J.C._Entertainment

Жыл бұрын

You need to hook the valve bank to the controller and power supply

@ElitechipEntertainment

Жыл бұрын

@@S.J.C._Entertainment and are you supposed to cut the air hoses to connect them to the valve bank to the cylinders?

@S.J.C._Entertainment

Жыл бұрын

@@ElitechipEntertainment yes.

@ElitechipEntertainment

Жыл бұрын

@@S.J.C._Entertainment i got a showbiz pizza place mac valve. used in a show it will be a good addition to the valve bank lol

@S.J.C._Entertainment

Жыл бұрын

@@ElitechipEntertainment ah nice

YOSSSSSSSSSSSS

What compressor did u use

@S.J.C._Entertainment

Жыл бұрын

Bostitch 6 gallon pancake compressor.

@08px.

Жыл бұрын

@@S.J.C._Entertainment thx

what are those colored servo thingamajigs called?

@S.J.C._Entertainment

Жыл бұрын

Time stamp of when they’re on screen? I’m not quite sure what your referring too.

@MrScottishManiacCat

Жыл бұрын

0:33 to 0:35

@ChuckChaos1

Ай бұрын

@@MrScottishManiacCatknex

So are these things strong enough to break bones?

@S.J.C._Entertainment

Жыл бұрын

No. Just like any other existing animatronic.

Do they have a controler yet????

@S.J.C._Entertainment

2 жыл бұрын

Not yet

make a tutorial plz

@S.J.C._Entertainment

Жыл бұрын

No. Multiple reasons why I can’t.

😂🎉поио это классный аниматроник ну Фредди похоже твоя но походит только забыл ещё доделать это😊 ну раз такой

at 0:04 , what is that thing called? i literally can’t remember the name whatsoever

@S.J.C._Entertainment

Жыл бұрын

Air compressor

@toonygamers8476

Жыл бұрын

@@S.J.C._Entertainment qual marca?

How Did You Get Monty’s Valve To Hook Up If Those Solenoids Are Separated?

@S.J.C._Entertainment

Жыл бұрын

I used another airline to connect the two.

@Brodie338

Жыл бұрын

@@S.J.C._Entertainment Ok

@Brodie338

Жыл бұрын

@@S.J.C._Entertainment ThNks

@Brodie338

Жыл бұрын

@@S.J.C._Entertainment Well What Was The Name Of The Piece?

@S.J.C._Entertainment

Жыл бұрын

@@Brodie338 An airline? Lol

Were did u get that controller thing the cylinders?

@S.J.C._Entertainment

2 жыл бұрын

Everything was bought from Amazon

@Wyattonigiri

2 жыл бұрын

@@S.J.C._Entertainment yeah but whats the controller thing called ?

@S.J.C._Entertainment

2 жыл бұрын

@@Wyattonigiri valve bank

@Wyattonigiri

2 жыл бұрын

@@S.J.C._Entertainment thanks

How much does it cost for one of them like to build?

@S.J.C._Entertainment

Жыл бұрын

It depends

They must break alot with the forse of the cylinders pushing on the knex

@S.J.C._Entertainment

Жыл бұрын

They don’t

@orangetheorange

Жыл бұрын

@@S.J.C._Entertainment quite surprising. You must have them built well!

@S.J.C._Entertainment

Жыл бұрын

@@orangetheorange thank you!

What controller did you use

@S.J.C._Entertainment

5 ай бұрын

Arduino and vixen lights.

@Unknown33367

5 ай бұрын

@@S.J.C._Entertainment thank you

What happened to your oddballs macerena video?

@BradStudiosBR

2 жыл бұрын

With shaggy and Carl wheezer on screen

@S.J.C._Entertainment

2 жыл бұрын

Uh nothing lol. It's still there

@BradStudiosBR

2 жыл бұрын

@@S.J.C._Entertainment not there for me

@S.J.C._Entertainment

2 жыл бұрын

@@BradStudiosBR well it's still there for everyone else so idk what's wrong

I have a pneumatic bird animatronic I want to program to the picoBoo FI-104 Can you hook up a valve bank to this? How many movements can you program? How long can you record sound with animation, I have a 4 min song that I need 4 mins of animation to? If this is not cable to program a pneumatic bird animatronic too, then can you give me other advice. resources?

@S.J.C._Entertainment

Жыл бұрын

I have no clue what a picoboo is.

@Enchantedmusicandmore

Жыл бұрын

@@S.J.C._Entertainment it is a prop controller that records audio and movements to program pneumatic animatronics. since you don't know what picaboo is, what do you use to program your animatronics?

@S.J.C._Entertainment

Жыл бұрын

@@Enchantedmusicandmore arduino and vixen lights software

@Enchantedmusicandmore

Жыл бұрын

​@@S.J.C._Entertainment I don't really know much about Arduino circuit board, and Vixen lights software. Do you have to solder wires to these boards, do you plug in air valves in the boards? Is the vixen light software free?

@S.J.C._Entertainment

Жыл бұрын

@@Enchantedmusicandmore no soldering, you need to connect the stuff obviously, and yes it’s free.

Hum so are going to use servo motors?

@S.J.C._Entertainment

Жыл бұрын

No… you can see in the video lol

@toonygamers8476

Жыл бұрын

@@S.J.C._Entertainment ok oand pnemutic air cylinders lol

im from 8 months agooo

@S.J.C._Entertainment

7 ай бұрын

?

If you have they are still available can I have the links to the pneumatics and stuff

@S.J.C._Entertainment

2 жыл бұрын

You should just be able to looks up pneumatic cylinders on Amazon and it should bring them up

@QuestionablyMJ

2 жыл бұрын

@@S.J.C._Entertainment Ok thanks Im upgrading my animatronic with pneumatics like you did

@S.J.C._Entertainment

2 жыл бұрын

@@QuestionablyMJ nice!

@QuestionablyMJ

2 жыл бұрын

@@S.J.C._Entertainment Also they look fantastic!

@S.J.C._Entertainment

2 жыл бұрын

@@QuestionablyMJ thanks!

Vou fazer o urso do major magics beatles hive

How do you get to ShowBiz Pizza Ria animatronic skeleton

@S.J.C._Entertainment

Жыл бұрын

What?

How do you program them

@S.J.C._Entertainment

6 ай бұрын

A program called vixen lights and an Arduino.

@--Dannyman--

6 ай бұрын

Thank you so much I'm making my own animatronic and I have everything I need and all I needed was to know how to program them

@--Dannyman--

6 ай бұрын

@@S.J.C._Entertainment you should make a video showing how you do the programming

@S.J.C._Entertainment

6 ай бұрын

@@--Dannyman-- no. Sorry.

@S.J.C._Entertainment

6 ай бұрын

@@--Dannyman-- You can find quite a few videos on how to do it though.

hey what are those buttons called that you use I wanna buy them

@S.J.C._Entertainment

Жыл бұрын

Solenoid valve banks. You need some other equipment to actually use them though lol.

@pmymgr1296

Жыл бұрын

@@S.J.C._Entertainment but do you need like air cylinders and air tank

@S.J.C._Entertainment

Жыл бұрын

@@pmymgr1296 yes. And air hosing.

@pmymgr1296

Жыл бұрын

@@S.J.C._Entertainment thank you

I Changed my content because my bots always broke so i quit robotics they are my displays now

@S.J.C._Entertainment

2 жыл бұрын

Ok

@jacktutorial2502

2 жыл бұрын

Should i break them or display them?

@S.J.C._Entertainment

2 жыл бұрын

Not sure why you'd destroy them, but do whatever you want

@jacktutorial2502

2 жыл бұрын

Ok so i'll display them

Did you only make this video cause my valves I got lol

@S.J.C._Entertainment

2 жыл бұрын

What? No lol. I’ve been planning to do this for weeks now

@Amdw119

2 жыл бұрын

@@S.J.C._Entertainment oh ok

So, hydraulic motors?

@S.J.C._Entertainment

Жыл бұрын

Air cylinders. So basically yeah

@MattIsTheCat

Жыл бұрын

@@S.J.C._Entertainment I guess it wouldn’t be hydraulic since you are using a Gas.

@S.J.C._Entertainment

Жыл бұрын

@@MattIsTheCat it’s actually compressed air

William afton from wish ☠️☠️☠️

@S.J.C._Entertainment

2 ай бұрын

It is I.

Qual e o nome desse controle que vc usa pros movimentos dele

@S.J.C._Entertainment

Жыл бұрын

Valve bank (sorry for late reply)

What did you do to the RC cars

@S.J.C._Entertainment

2 жыл бұрын

I’m using them for side projects

@The-South-Line

2 жыл бұрын

What side projects

@S.J.C._Entertainment

2 жыл бұрын

@@The-South-Line nothing yet but if I ever build another one I'll use the RC motors

Hello,my 16 year old son, who has autism, daw this and wants one. Do you have parts and instructions on how to build one of these, please. I am no Bob Villa or Norm Abrams, but I will try to build one for him. Thanks!

@S.J.C._Entertainment

11 ай бұрын

Hi! Would a list of specific parts help? This video pretty much shows how everything’s put together.

@b.w.vanalstyne7197

11 ай бұрын

That would be wonderful thank you @S.J.C._Entertainment I would love a list, please.

@S.J.C._Entertainment

11 ай бұрын

@@b.w.vanalstyne7197 I guess I should also ask if your planning on programming anything, do you plan on having this all be fully automatic or just where you press the valve buttons to make things move (like what I’m doing in the video) if you doing something simpler I’d recommend doing that since It’s a lot cheaper and easier

@b.w.vanalstyne7197

11 ай бұрын

@S.J.C._Entertainment I think I'd like to see both plans. Something that is fully automated sounds like sommat my son would like. Kind of like Chuck e Cheese.

@S.J.C._Entertainment

11 ай бұрын

@@b.w.vanalstyne7197 gotcha. you will need the following: (all of which will be available on Amazon lol) An air compressor, not sure which exact size/brand you’d need since it’s up to you how many movements it’ll have. Air cylinders, again, up to you about which size/quantity you’d need, but I’ve gotten a good variety of sizes and they all work great. Air hosing, most cylinders I’ve come across use 6mm hosing size but be sure to double check the size when you buy cylinders. Solenoid valve bank, this is the “button thing” you see in the video, it essentially just opens and closes a valve causing air to flow to the cylinders. Flow controls/restrictors These are little plastic knobs that you snap onto the air hosing, these will allow you to restrict airflow to the cylinders allowing a smoother motion without needing to turn the psi of the compressor down. These are technically optional but it’ll generally allow things to look better when operating and increase the longevity of the cylinders and mechanical parts. There may also be additional fittings you may need but a good majority will come with their assigned parts. But in case you do need more they will always be available on Amazon So that’s about it in terms of the mechanical stuff, If you have all this, your character should be in a perfectly working state. Now as you mentioned you’d like it to have it perform like a Chuck E. Cheese animatronic so this’ll be all the stuff you need to have it become fully automated. A computer, you could use pretty much any sort of laptop or Pc as long as it has a USB port. I’ve seen people run these with computers from 2003 so even if you don’t currently have one you could easily find an older one for a decent price. Along with the computer you’ll need a programming software, I personally use vixen lights since it’s free. I’ve been using it for nearly a year and I will admit that it is a bit tedious, but it’s generally pretty easy once you understand it. A Arduino uno board. There’s a few other types of arduinos that you can use but I personally use an uno so I can confirm that that particular one works great. A relay module. Be sure to find one with a subtable amount of channels for your character (I personally use an 8 channel one) Jumper wires. Simple, cheap, little wires that click together with no need for soldering. And finally a power cable with jumper wire attachment. MAKE SURE that you get one with the same voltage as your valve bank, if you have 24 volt valves with a 12 volt power supply it won’t work. So make sure all your valve banks use the same voltage. And then finally their the bare bones mechanical parts you’ll need. Now this is completely up to you, so if you want a wooden frame you’d need to buy parts subtable for a wood frame, same goes for metal, etc. I know this sounds like a lot, but I did this all at a pretty young age on a very limited budget. So as long as your willing to put a bit of time and money into it you should be able to make something cool. And of course if you need any pointers or extra info don’t hesitate to ask me, I would also recommend watching a few videos on how to set some specific parts up just to be safe, but some things will certainly be easier then others. Sorry for the very long comment lol Best of luck :)

MAKE A FLAG WAVER

@S.J.C._Entertainment

2 жыл бұрын

IN THE WORKS!

@victormanguy8156

2 жыл бұрын

@@S.J.C._Entertainment BOOYA

@victormanguy8156

2 жыл бұрын

@@S.J.C._Entertainment also, where do you get your pneumatic stuff and how much does it cost

@S.J.C._Entertainment

2 жыл бұрын

@@victormanguy8156 depends on how much you get.

@victormanguy8156

2 жыл бұрын

@@S.J.C._Entertainment could you tell me the price of just one alongside all the necessary equipment to make it work

Im back i always come back

@S.J.C._Entertainment

7 ай бұрын

Not sure who you are, but welcome back I guess.

i am sad

@S.J.C._Entertainment

2 жыл бұрын

Why's that?

@simonsays365

2 жыл бұрын

@@S.J.C._Entertainment because both of my locals are about to get 2.0 they are tallahassee fl and albany ga and the last blue pizza cam in luurel md is getting 2.0 now so life sucks but i am about to eat some pizza so yay