I like duke traps. I live 5.5 hrs from duke trap company. I made the trip yesterday. I went after duke #2 offset 4 coil dogless. And duke pro 850. I plaining on going to all Duke 2 dogless traps. I have mb and brigder traps also. I am fixing to laminate the duke dogless traps.

I love Duke's traps! I've used them all my 'career.'

I have modified duke’s # 3 traps and they are bad boys.

@CoyoteAcademy

Жыл бұрын

Absolutely

Any other Trap mod videos would be great!

@CoyoteAcademy

Жыл бұрын

Working on it

i like my Duke #2 square jaw traps. They hold great, nice video

I use Bridger #2 and #3 fully modified. I use the stock dog till it get bent and they do....then I put on the Bob Custer "Top Dog" Have not had a coyote bend one of them.

I just found your Channel, and subscribed, this is the information I've been looking for

@CoyoteAcademy

Жыл бұрын

Awesome, thank you!

Duke 550s are cheaper then these 2 modified and are coyote ready. I've not had a pull out or a popped jaw. I'm converting my entire line to 550s and 650s

@CoyoteAcademy

Жыл бұрын

I have nothing against the 550s, and agree they are ready to rock and roll. I’m converting my entire line to the NO BS Jrs

@davetoms63

Жыл бұрын

@@CoyoteAcademy I have 6 of them, very solid traps

Check those D rings on those Dukes mine were only crimped on...not welded.

@CoyoteAcademy

3 жыл бұрын

Duke will send you the replacement d rings for free. Just FYI

@John-ls6hz

3 жыл бұрын

@@CoyoteAcademy not to worry I fixed them ....wicked strong little trap.Just something that needs to be checked

Nice looking traps no matter which one you choose. Great vid bro! New sub here. 👍

@CoyoteAcademy

Жыл бұрын

Thanks for the sub!

Good video, I learned some stuff. Question, any advantage or disadvantage with lamination in regards to inside lam vs. outside lam?

@CoyoteAcademy

3 жыл бұрын

An advantage in regards to that would be if your state required a certain inside jaw spread and you needed to meet that requirement, then you could put inside lamination on your trap.That would give you a shorter distance and potentially help you meet that requirement. Another solution would be hooking the jaw tips. This also cuts down on jaw spread width.

As Sgt. Schultz said, "Very interesting, but stupid!"

@CoyoteAcademy

Жыл бұрын

Haha “stupid is as stupid does”

Why do you laminate the jaws ?

@CoyoteAcademy

10 ай бұрын

Increases surface area of the jaw.

@justme4172

10 ай бұрын

@@CoyoteAcademy So it’s easier on the predators leg/foot ?

Whats wrong with the dog that comes with the pan? Also what kind of dog was it you used

@CoyoteAcademy

9 ай бұрын

Rod style dog. I like them better because of the durability. That is my opinion

What's the length on the rod style dog

@CoyoteAcademy

2 жыл бұрын

Original rod style dog. 2 and 1/16”

I have some Duke 3s what paws I trip pan would suggest I get for those.

@CoyoteAcademy

Жыл бұрын

“PIT-13”

Thanks for sharing I mostly use Bridger #2 but I do have duke #3 and #4 what's really the difference between duke #2 and Bridger #2 I see they look almost the same but I'm pretty sure Bridger has stronger springs my #2 Bridger's 4 coil are harder to set them my duke #4

@CoyoteAcademy

Жыл бұрын

Good stuff

What is the benefit of the rod style dog versus a flat style?

@CoyoteAcademy

Жыл бұрын

The durability is better with the rod style

you are write why spend money that is not needed i dont see any problems do in it your way .I will do my duke that way good video

Will the 9C pan work or are they too big?

@CoyoteAcademy

Жыл бұрын

I can’t say for a #2 but I did put the oversized pit pan on my duke #4s and they have been fantastic

Dukes look good but there cheaply made. I get bridger now.

To many sharp edges