Video starts 1:02

@phildeblanks

5 ай бұрын

The real MVP . One minute intros are annoying . Far too many times have I found another video to not have to filter out the intro to find the information .

@richardgray115

2 ай бұрын

I'm in 2.5 minutes and haven't seen any of the real video yet

Aloha from Hawaii! Love your videos and I'm looking forward to seeing the next video

@VehicleTribe

5 жыл бұрын

Thank you! More videos coming soon!

I'm in the market, this was very useful content. Thank you!

Just found your channel, great video and love the XJ, Thanks

Bout time man ive been waiting for another video 👍

@VehicleTribe

5 жыл бұрын

Beers nGearz thank you man! I was really busy last month 👍🏻

@beersngearz781

5 жыл бұрын

@@VehicleTribe I know man it's hard to keep up with making videos I've been slacking too

Do you work on it yourself of do you have a shop install the upgrades?

it took me almost 2 years to find a clean 2000 at a good deal. Honestly I wanted a 98/99 but I had to compromise and get a 2000. I couldn't find a 98/99 that wasn't dogged out. The 00/01 have a aluminum head that is prone to cracking, and a low pinion Dana 30. But I will be doing a motor swap and axles. But the body is clean😄

@VehicleTribe

5 жыл бұрын

Ole Roy I feel you, 99s are my favorite but they there are just a few for sale in a good condition. 👍🏻

@rrholm472

5 жыл бұрын

2000/2001 do not have and aluminum hesd. It is a cast iron head. The problem is these 0331 casting heads had poor quality control and are prone to cracking. Especially when there is a problem with over heating as stated in this video.

@oleroy4749

5 жыл бұрын

That's rite. I got the bad head tho😔

@longhorn8459

4 жыл бұрын

Ole Roy did you swap your motor yet? I just finished my TJ LS swap and I think I want to swap an XJ next.

omg that is a beautiful xj ........ i need one like that

2000/2001 the heads Crack from overheating. Perfect for LS swap lol

Un gran Saludo de México 💪💪💪

Welcome back

@VehicleTribe

5 жыл бұрын

Hunter Wuesthoff thank you 🙌🏻

what camera are you using ?

Vehicle Tribe hi guy it's been a while yes the caption is working fine thank you like you I like to get my car's stock no mods like you said you don't know how good there work is or the quality of the parts they used or you might like to mod. it differently for you're purpose of looks that says this is me you should all so look under the car to see if it has been wrecked and fixed to look good but not fixed right like under the bumpers etc well glad you're doing good I just got a 93 Ford F350 four door long bed pickup role along model with a 460 cid 7.5 liter runs great in good shape for only a thousand cheap price I bought it so I have something that will tow and haul anything I want like JEEPS car's truck's etc I'm not a house trailer type guy oh I wondered one thing Florida do you surf just wondered well you have very good night guy 👍👍👍from California C😎😎L

It wasnt the head gasket, it was the head. In late 99, Jeep changed the casting, to the notorious 0331 head. The casting is thin between cylinders 3 and 4, and tend to crack, causing overheating. However, this is easily solved, as heads are cheap, and any head will work on any 4.0 block. Also, you can pull a head in your driveway in just a couple of hours.

@davidtrevino5211

3 жыл бұрын

Yes , but will any head work on a 2000 - 2001 ?? Remember they have no distributor.... Are they not slightly different ?

@scottdoubleyou563

3 жыл бұрын

@@davidtrevino5211 Yes. The bolt pattern and locations for the intake, exhaust, and head bolts are identical throughout. As for the differences between distributor and coil packs, that's simply wiring, as the dizzy goes on the engine, and the coil pack is plugged into the engine harness. However, the 2000, 2001 heads have lugs cast into them for the 2 bolts that secure the coil pack to the head. But my 98 head is on my 2000 block, with the coilpack, and it's plenty secure with just the boots on the spark plugs. Hope this helps.

@davidtrevino5211

3 жыл бұрын

@@scottdoubleyou563 Yes, it really did. Thank you sooo much.. Much appreciated....

1997 Jeep Cherokee XJ 2.5TD with a little rust on the doorstep and on the mudguard for 3900€? It's a little bit expensive, or? What is the realistic price for it?

@davidtrevino5211

4 жыл бұрын

I'd say that's a little high. Unless they've added a good amount of aftermarket parts that you were going to buy yourself eventually.. $2500- $3000 is reasonable..

Oh my lord, I did THE SAME THING about the Mazda, now it’s sitting in my driveway dead and I can’t sell it

@malloy8824

2 жыл бұрын

The sad part is rotary’s in general even the rx8 aren’t actually that unreliable. It’s just the need VERY extensive maintenance very frequently. That’s what people just don’t know. With premixing, the right oil, frequent oil changes they will stay pretty reliable but nobody knows to premix and didn’t know to change the oil every couple thousand miles so they bought the rx8 back whenever didn’t maintenance it correctly and then it blows up at 50k miles and is labeled “unreliable”

I'm new at this and I found a 1988 Cherokee. Any thoughts on it ? Has a rebuilt engine and my friends cousin is asking 6k for it

What year is your Jeep

@kzpylj7729

4 жыл бұрын

If you watched the vid he says 2000 lol

Why is the screen not flush?

@VehicleTribe

4 жыл бұрын

Joe Kool it’s supposed to be like that. It won’t fit inside the plastic vessel.

Haha fell in love with the WORST Mazda ever made lol

By getting rid of rx8 means you ripped someone else off?

@VehicleTribe

4 жыл бұрын

Not really, it ended up in a junk yard lol it had some good parts tho but the engine and transmission were shot

Whew shaky video

No one cares bro…