beeman sportman rs2 disassembly of the trigger and reassembly
I had a viewer reach out to me and ask me to make this video because his air rifle will not catch when he cocks it so i hope this video helps all of my viewers.
I had a viewer reach out to me and ask me to make this video because his air rifle will not catch when he cocks it so i hope this video helps all of my viewers.
Пікірлер: 56
I thank you for taking the time to do this. and you do a great job of explaining it to those of us that struggle a bit. Real helpful to better understand one of my favorite guns. I like this one because it’s fun, quiet and I can shoot it anytime I want and not have to worry about noise. Great for getting rid of critters.
@goodolboyzoutdoors841
11 ай бұрын
Your vary welcome I am glad my video help you
Couldn't have done it without you. Thanks for fixing my beeman.
Your the man bro it was that spring and the video was perfect angles lighting haha it cocks now thanks bro I'm a subscriber for life.
@goodolboyzoutdoors841
5 жыл бұрын
Justin moore I am glad to hear that was the problem. And i am also glad the angles and lighting was good. I just want to thank you for subscribing also you have a good day buddy if you need anything else just let me know.
Thanks for your video!
That helped a lot on shockwave thanks 👍🤠👊
@goodolboyzoutdoors841
3 жыл бұрын
your welcome buddy i am happy it helped you
Good 👍🏻 job 🙏 Ps : take the scope off next time .
I have a differ set up no side spring but have to small springs besides the trigger adjustment
@Starkslws
3 ай бұрын
I got it to work seems like the extra spring was left in gun that jammed it 👏
hey ive watched your video multiple times. Ive takien mine apart and put it back together as you did . I cant figure out why mine still isnt cocking
I would like to see how to get the spring decompressed and out along with the piston so i can possibly mod the gun to a gas spring in the future.
Great video. Is there a way to adjust the travel distance on the trigger itself?
My E-Clip popped off the top pin and the trigger moved very little and so I fixed that, put the stock back on and now it won't cock and I just don't know what to do
I have a Beeman Crew Mag 25cal and Beeman RX2. Neither have been shot in several years. Got them out and neither will shot after cocked? To my knowledge neither have be taken apart. I watched your video but it indicated one of the part were put in incorrectly?? They were shooting well last I shot them several years ago. Been locked in a gun case. Is something maybe “stuck” from sitting up so long. I have not removed the stocks yet to examine.
inhave the same model. if you want make the second stage lighter i should thightening the back screw or loosen?
@goodolboyzoutdoors841
3 ай бұрын
I honestly can't remember I gave that air rifle away to my cousin who wanted it but if I am not mistaken I think turn it back out but whenever you do this use a paint marker and make a line on the screw and your rifle so you can count and keep track of how many times u back it out or turn it in I hope this helps you
When I purchased my RS2 it worked like a dream however after about six months it failed to cock. I set it aside because I couldn't find out what to do to fix it. I watched your video and followed it to the letter, My spring was already in the position you suggested but after looking at the trigger assy. I couldn't find anything that looked broken. Is there an adjustment that could cause the sear to latch when cocked? I looked at the two adjustment screws but I don't understand if they do anything other than lessen or tighten the trigger pull. It would be more cost effective to buy another gun than to send it to a gunsmith and I hate to just throw it away. please give me some suggestions.
How do you get to the piston on this model?
Donde puedo conceguir esa parte conpleta del gatillo beerman sporman rs2.
is there a second spring where does it go could you explain that?
Hello, I am writing to you from Peru. my name Alejandro, my query is that when I load the rifle, it shoots by itself when closing the barrel, then I disarm it and now I saw the video of how you release the trigger and now it doesn't lock to load. Do you have a page where I can buy the trigger or the accessories? Thanks a lot.
The arm looking piece what's the name of it
Can you explain how I put together the last part you didn’t take apart
I have this gun in the regulated version ,bullshit canadian laws , did some mods and its a great gun , i removed that trigger spring completly to get a lighter pull on trigger , i dont know why they even have this spring there , trigger works fine without it and way better pull . Thinking of polishing trigger parts next to make it even better , i did polish and relube the piston and a few mods i cant mention lol , if any of you guys are looking to get this gun i would recommend a better scope , other then that i really like this gun ....
If you were to leave that bracket thing on the side off would you end up with a manual safety?
@4486xxdawson
3 жыл бұрын
Yes
Дякую за роботу! Розкажіть, будь ласка, як налаштувати спусковий гачок, щоб він не хитався в сторони?🇺🇦
I did what he did in this video but my gun still won’t cock? What could be the problem?
Great Vid! I have beemen s1 is much different than yours when taking it apart?
@4486xxdawson
3 жыл бұрын
I think you mean R1 and yes different platform
could you make a video on the location of the spring for the lower sear that cocks the gun?
@chickennuggetinagutter.7864
3 жыл бұрын
Do you know if so tell me how
How do you take the piston spring out
@goodolboyzoutdoors841
3 жыл бұрын
At the back of the air rifle there is thos pins you have to use a punch that is the same size and hold the air rifle down its really hard and it can pop out and hurt you if your not careful I would make a video on it but I don't have that air rifle anymore hope this helps have a blessed day
Hey man, that pin you said don’t pull out, I did. How do I get it back together ??
@goodolboyzoutdoors841
3 жыл бұрын
Man buddy i gave that air rifle to a good friend of mine and i don't know i do know that i could fix it if i had it
i am having problems with my beeman sportsman rs2 .22 not cocking or not clicking at end of cocking. looking at your disassembly and reassembly video..my trigger assembly is somewhat different than yours in video. not sure about trying to take apart,.
@cnyjyk
3 жыл бұрын
Could be the piston where catch the top sear was worn off, sharpen to 90 degree angle can help. Or might be those two sears spring are getting weak.
What price did you get your rifle for at the pawn shop ?
@goodolboyzoutdoors841
4 жыл бұрын
For that one it was 50$
Can you get tiger parts
@goodolboyzoutdoors841
5 ай бұрын
Your best bet is to go to the air gun depo or pyramid air and see if they have parts or find an air rifle online for cheap and take the parts you need off of it
when i pull the trigger it dosent shoot and i took it off safety but the trigger goes back
@goodolboyzoutdoors841
11 ай бұрын
Did you make sure your spring is in and everything is lining up
@goodolboyzoutdoors841
11 ай бұрын
P.s if you can't figure it out maybe you could send me a video of what you did and we can figure it out together
After several hours of fussing with this I finally got it to cock. I realized that the problem is with that spring as shown here it seems to be a little short to reach the rolled pin. But the real problem is that this sear just barley catches the cocking sear after wiggling the trigger it will cock but it feels unsafe because it feels like it could jar loose before you pull the trigger.
@goodolboyzoutdoors841
11 ай бұрын
Maybe take the spring and pull it put and stretch it out a little bit
One of tho little black things snapped
I had a fucking seizure trying to understand wtf you are saying
@scotthsmith8635
2 жыл бұрын
Great! Now there’s one less of you in the world. Jaja. If you don’t understand common English, then of course you’re not going to understand a southern accent. Gimme a break you, Stinkin haters!
@tristenweems5734
2 жыл бұрын
I think this guys on dope honestly but pretty good with firearms
I’ve given up on trying to fix this fucking piece of junk. I’ve tried so many ways to put it back together non of them have worked.
Can you explain how I put together the last part you didn’t take apart