No video
Beechcroft Model Railway - #42. A Door…and AnyRail!?!?
#hornbyrailways , #modelrailways , #bachmann , #modeltrains , #oogauge
Time to finally fit the door and seal the room! I know Spring is here but it still gets chilly above the garage so I’m going to get this final piece of structural work done.
It’s taken a couple of days but I can really notice the difference already. I was supposed to then start work on the embankment while I can still reach it….. but we all know how easily distracted I am. Couldn’t resist extending the board for the goods yard and having another go on AnyRail!!
Really pleased with the door and also the new area for the goods yard…. However, I really must prioritise the embankment around the incline!
Thanks for watching.
/ @grandadstrainroom-pn3tt
andyjxf@yahoo.co.uk
Пікірлер: 52
You have to be comfortable. nice to be able to close the door on the world.
@Grandadstrainroom-pn3tt
5 ай бұрын
It is! 👍
You're quite a handy guy. Nice job on the door installation. I'm looking forward to the goods yard being built.😊
@Grandadstrainroom-pn3tt
5 ай бұрын
Ha. Thanks. Yes, can’t wait to get back on the layout! 👍
I tuned in for the layout update, but the door improvement was epic. Great job!
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you very much. Back on the layout next week! 👍
Awesome video
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you! 👍
It's good to see you keeping yourself warm and comfy for the winter. Isn't it just about over for this year? I would look at some perspex protection for that edge. As a Grandad it's hard to keep up with the grandkids. Having a 30cm, 6" clear wall of perspex over top of the edge featuring signage below the layout base will protect the trains stored in the area from accidental damage. No further distraction it's time to work on the embankment around the incline. Looking forward to seeing more stories about your trains along with your Train Room Adventure.
@Grandadstrainroom-pn3tt
5 ай бұрын
Hopefully Spring is here! Never thought of Perspex - that’s a good idea 👍. Definitely working on the incline this week!
Excellent work. Well done.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you 👍
I think you did a great job on your door fitting. Plus great layout too. Looking forward to seeing more of the layout.👍👍👍👍
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks very much. It took a bit longer than I hoped but got there in the end. Back to the layout now 👍
Looking good, more power to your elbow sir!
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks very much 👍
Great job as usual.
@Grandadstrainroom-pn3tt
4 ай бұрын
Thanks 👍
Good job fellow Grandad, very impressed with your handywork. 👍
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you Grandad! 👍
Great video and good idea extending the baseboard. Looking great pal.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks very much. Cheers, Andy
Door looks good. You could put a sign on the inside of the door to remind visitors of the low door header. Like a low bridge indicator sign.
@Grandadstrainroom-pn3tt
5 ай бұрын
Yes - I think I have some of that black and yellow hazard tape as well! 👍
@CharlesPruden
5 ай бұрын
@@Grandadstrainroom-pn3ttThe space between your TV and the door would look pretty good with a rail map style map of the layout once the tracks are finalized.
Wow Sir what a lovely job you have done and always do. You are very gifted and a perfectionist in whatever you do. Your Layout is looking great. Always enjoy your videos. Thank you for sharing. Best wishes Richard Canterbury.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you very much Richard. I sometimes think I’ve taken too much on but manage to get there in the end! Regards, Andy
You’re an engine! Always impressed by your productivity and build quality, room doors and baseboards included. I suspect you may say you tend to procrastinate a bit, but there’s nothing wrong with a steady thought process that includes pauses to allow ideas to percolate. Plus you adapt and develop your layout very well indeed. Quality work as always. Well done.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you! I sometimes think if I’d thought things through better I might have saved some time, but I guess part of the enjoyment for me is changing things if I don’t think they look right! 👍
Love it Andy, thx again for sharing. Wish I had the time to progress mine half as quick as you do. Looking forward to the next instalment from Beechcroft
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you. Now the weather is picking up I’m going to have start the garden jobs - before the wife loses patience! 👍
@briansewell7263
5 ай бұрын
@Grandadstrainroom-pn3tt already in that boat, spent my days off assembling a bench and tidying up the lawns. Putting off the flowers bed's as the fence is getting replaced in a few weeks so not worth the hassle to just have it all trampled on Will try get some done over the next couple weeks and then plan a shopping list for Model World Live next month
Nice bit of carpentry, I have never been able to fit doors, they always bind when opening and closing.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks. Think I just got lucky with it! 👍
You have vision, ambition, and ability. A great improvement. I'm wondering of you'll end up building a lift section across the door to give you a complete circuit or you might go the helix route. You have the skills for it.
@Grandadstrainroom-pn3tt
5 ай бұрын
Ha. Thank you very much. You never know… 👍
Hi Andy, from another Andy. The problem you are having with your static grass culd be because the mesh size is too small. I had this problem, the grass not coming out freely and it also looked a mess. Changing to a larger mesh has solved that.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks Andy. Never even thought of that. I will have a look 👍
Like the new track plan and where you have moved the double slip so all sidings can use the headshunt. Just wonder if you need to move the crossover on the entry roads back as perhaps all you need is to be able to detach your longest loco and run it around the train rather than where you have it at the moment which is half way along a siding. Remember, when you bring a train in the loco will be at the front and will need to get out so give yourself the most space for wagons and minimum to move the loco around!
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks. I took your advice on the headshunt. Much appreciated. I see what you mean about the crossover, it’s far too long just for a loco. You can tell I’m no designer. Love your advice! 👍
@johnstephens649
5 ай бұрын
@@Grandadstrainroom-pn3tt Glad my comments are helpful. Can’t claim my ideas are totally original as it is a line of thinking I have pinched from Charlie at Chadwick and his goods yard planning! Look forward to the next episode.
Excellent job, Grandad.
@Grandadstrainroom-pn3tt
5 ай бұрын
Thank you. Very kind. Andy 👍
@dinmorejunctionmodelrailway
5 ай бұрын
@Grandadstrainroom-pn3tt Keep up the good work. In truth Andy one the layout is done, I'll miss the build because, for me, that's the best bit when filmed correctly
@Grandadstrainroom-pn3tt
5 ай бұрын
@@dinmorejunctionmodelrailway Thanks. I do wonder what I’ll do when (if!) I ever finish the layout. 👍
Hi Andy, knowing your a fan of steamers should you use the extra space by the door to add a turntable? Good video as always and easy on the ear. Keep em coming...Brian
@Grandadstrainroom-pn3tt
5 ай бұрын
Thanks Brian. Don’t tempt me! If I didn’t already have one in the main area then I might have just considered that! 👍
Shouldn't the smoke alarm be at the top of the stairs to detect a fire below ? Not that I'm able to guess the layout of your home - obviously.... Door is a good idea, I'm thinking of pulling an inward opening door and rotating it to open outwards..... for a bit more room !! By the door you could make a vertical "traverser" full of rolling stock ?
@Grandadstrainroom-pn3tt
5 ай бұрын
Hi, not sure really. Could make sense though! I agree, an outward opening door does give more space. A traversed is an interesting idea… 👍
Have you a plan for which Goods Depot building you're going to use?
@Grandadstrainroom-pn3tt
5 ай бұрын
Not as yet. Had a quick look on eBay but not sure of the style I want yet. Don’t know whether to go resin or laser cut. I’ve never tried card buildings like Metcalfe? There’s so many to choose from!
@duncanholden7214
5 ай бұрын
I have the Superquick one in situ at present, but really like the look of the 'In The Greenwood' one (I have the room!!), but never done laser cut kits before@@Grandadstrainroom-pn3tt