Beats Studio Pro Charge Port Replacement
Тәжірибелік нұсқаулар және стиль
Send your device in for repair 👉 www.joesge.com/pages/fix-beats-by-dre
Are you a repair ninja? Buy the parts here 👉 tinyurl.com/mtzd37pj
Steps to replace your ear pads:
1. Slide a pry tool between the right side ear pad and plastic speaker housing and pry it away from the headphones.
2. Remove the 5 black screws around the speaker. Be careful to not let them fall in the speaker.
3. Remove the 2 silver screws that hold the charge port in place.
4. Take a photo of the wiring on the charge port and speaker.
5. Desolder the two wires on the speaker driver and the 5 on the charge port.
6. carefully lift the microphone out of it's place.
7. Use a solder iron to heat the four points on the charge port that secure it in place while gently prying it up with a thin flat head screwdriver.
8. Scrape off the glue under the charge port.
9. Put some cold press glue into the slot and insert your new charge port.
10. Solder the wires back onto the port and speaker.
11. Fold all of the wires into the center of the speaker then put the speaker and housing back into the headphones. Make sure there are no gaps around the speaker housing edge.
12. Install the 7 screws back into their places.
13. Line up the divot in the ear pad with the charge port bump and press it in place.
14. Get back to jamming out 🎵
Hello repair ninjas 🥷 As a way to help out with the increasing demand for videos of specific repairs, we have created a membership for our channel that allows you to request 1 custom repair video per month. The video you request will be put at the top of our queue and will be uploaded as quickly as possible. The video can also be started with a shout-out if you would like that. As always, thanks for checking out our repair dojo 🥷
Join Here 👉 bit.ly/3rMJJkW
Follow us on our social media for more repair content:
Instagram 📸 - joesge
Facebook - JoesGE
Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
Пікірлер: 9
Please do the complete disassembly of the Beats Studio pro
@Joesge
3 ай бұрын
It's on its way! Subscribe so you know when it comes out.
do you know what the pinout is for the 5 wires?
@Joesge
2 ай бұрын
Hello, thanks for commenting. Please email us at support@joesge.com with your question. We will be able to better assist you there. - JoesGE
Is the repair the same for the Beats Solo pro?
@Joesge
Ай бұрын
No, very different hardware
Do you fix Beats Studio model#BO501? Thanks!
@Joesge
Ай бұрын
We sure do - www.joesge.com/pages/repair-service
@circleherk
Ай бұрын
@@Joesge I don't see that option when selecting the model. What set should I choose? Thanks.