That’s so great - laughed so hard! You crack me up. I continue to admire your perseverance and your sense of humor. You are truly amazing. Keep the vids coming 👍

You did a great job at a low cost, excellent!

Great editing! Seats look good, I can't wait to take a ride haha

Ooohhh!!!! Electric stapler!!! I like that!

Currently working on my boat and this is one of my last things to do. Been following you for a while now. Perfect timing for you to do this

@martinschoorl5083

4 жыл бұрын

Have you taken apart your leg. I have to reset the shifter linkage inside of it and would love some pointers

Great series, watching your process and progress! In the process of going through the 3.0 in my 2003 Rinker and your videos gave me the inspiration that there isn't that much black-magic in pulling and going through its motor, really nice to see what I'm getting myself into. Now that this project has wound down, what I'd love to see is a lessons learned video, basically what mistakes you made, what you could have done to make it easier, and words of advice. Thanks again for the great video!

@ZachsGarage1

4 жыл бұрын

Really glad the videos helped inspire you! I think that's a great idea for a future video, probably multiple videos. So stay tuned!

Epoxy is AWESOME! Glad to see you using it! Just an FYI it's very tough and a complete pain in the ass to sand to make it smooth if you need to!

I’m making some boat cushions this week myself! Love the channel.

@ZachsGarage1

4 жыл бұрын

Thanks!

Zach, I stumbled across your video series when I took on my own project boat recently a 1971 Correct Craft. I have loved your enthusiasm, positivity and determination to finish this project. Thank you for providing so many helpful tips, many of which I will be using myself. Enjoy your boat!!

@ZachsGarage1

4 жыл бұрын

I appreciate your comment! Enjoy your boat too!

Great job on the seats

Great job! thanks

Alternate Title: "Zech's ASMR" PS: That quick cut sent me! Your editing has gotten way to good!

@ZachsGarage1

4 жыл бұрын

lol, I knew the first person shots were a good idea ;)

After the cleaning i strongly suggest wiping the vinyl down afterwards with 303 Aerospace vinyl protectant. Great stuff!

Hey Zack, when I was redoing my boat and upholstery I took off my handles and let them soak in a bowl of bleach and water and they came out perfect and stain free ! Keep up the great work, I enjoy watching your videos...Nick

@ZachsGarage1

4 жыл бұрын

Thanks Nick, great tip! I plan on trying that!

@nicholasschmidt7114

4 жыл бұрын

@@ZachsGarage1 I promise that it works lol. Keep up the great boat videos because people are watching..!

# Personally, I would not use the old foam as it will have fungus in it and could infect the new wood as the foam is cheap I would replace it for sure Don't be cheap you want your job to last and look good as that foam has dried out and probably will start to crumble very soon and you will have to redo all your hard work nice video and keep on trucking Zach.

Dude you inspired me to take on a project. 1991 Bayliner Capri 20’. I’ve almost got it down to the stringers but I’m working on the outboard motor now. I also have a little angle grinder hole on the bottom/side of the hull form the previous dude who attempting to remove the old seats. Smh. Any help you can send my way would be greatly appreciated

@ZachsGarage1

4 жыл бұрын

That's awesome! I'm happy to help with any questions you have along the way. Feel free to shoot me any pictures through Instagram or email

First view all the way from Holland

@ZachsGarage1

4 жыл бұрын

That was fast!

I picked up a 06 tahoe q4 with a 3.0 and found your channel. Thanks for the free knowledge :) btw if my Q4 window is hard to close does that mean there is floor damage and or repair needed or is it normal?

@ZachsGarage1

4 жыл бұрын

it's perfectly normal for it to be hard to close. The windows are notorious for not lining up on almost any model. Some of the newer models now don't even have that latching window in the middle.

One thing I don't know if you noticed is the holes in the original wood, I suppose these holes were for draining the water from the foam and also the air to come in. I am doing the same restoration on a Bayliner 2655. Thanks for the video!

@stinger4095

3 жыл бұрын

Is it necessary to use the black fabric on the bottom? What kind of epoxy do you use to seal the wood? I just pulled all of my seats out of my 2855 to replace wood on bottom of seats. I need to replace the clear film also. Anything special about that stuff or is it just thin standard plastic?

@josephwilliams349

2 жыл бұрын

The hole is to allow the foam to compress and retract without trapping air in and stressing the vinyl. The black fabric is called cambric and is used to make the underside look better.

Got to put your vent holes in the plywood or youvwill blow out the seams

Do you still have the stencil of the seats? I need to get seats made my boat doesn’t have the front bottom cushions.

Hi I am a upholster. I have patterns for those seat interior. Nice video

@otarv1

2 жыл бұрын

Teresa, do you have patters for the original back to back recliners for 98 capri 2050LS?

What are you using to clean the seats

@ZachsGarage1

4 жыл бұрын

SuperClean degreaser and water!

Hello Zach! We have a 1998 Bayliner that has the double (back to back) captain & co-captian seats. I noticed your swivel, single seats in this area. Did you replace the original seats with the swivel ones? Thank you!

@ZachsGarage1

4 ай бұрын

Yes, I did

@angelwenrich1850

4 ай бұрын

@@ZachsGarage1 Can you direct me to that video? Can you share where you purchased the swivel seats? Thank you.

@ZachsGarage1

4 ай бұрын

Certainly! kzread.info/dash/bejne/hpxokqd8cpSum6Q.html Links the video description to the seats and parts I ordered

@angelwenrich1850

4 ай бұрын

@@ZachsGarage1 Thank you!

I have a 1992 18 foot bayliner with a 4.3

@RattleTrapGarage

4 жыл бұрын

And I have a 1994 17 foot bayliner

@ZachsGarage1

4 жыл бұрын

Nice!

Was that a roach that came out of your cushion at 5:00?

@ZachsGarage1

4 жыл бұрын

lol I re-watched it a few times to double check, but no, I think it was just wood flakes ;)