That PP to Manscaped transition was disgusting 🔥

@Scrimsun

11 ай бұрын

wrd

@LoveNoThotss

8 ай бұрын

not me rewinding the video to watch the ad i missed LMAO

In the beginning when you put the intake on, the air still recirculates and kinda sounds like a centrifugal supercharger. That’s something I love about prochargers and stuff is that off throttle at high rpm, air just constantly whooshes out. Super dope

Bro as an old dude, I fully appreciated the Vader/Q-Bert reference. :D

@delspool

Жыл бұрын

Thank you

@barrios5430

Жыл бұрын

I got the reference and I'm 18... only reason is cus I've seen Q-bert in the adam sandler movie Pixels 😂

@mcdamn_it

Жыл бұрын

Haha! I feel ya Matt.

@carlitoway50

Жыл бұрын

Yes I understood exactly 💯

@user-cu2ix2cs5b

Жыл бұрын

너도 오랜이냐

Hey bro I've been watching your channel for a little over a month now I really love your style in the content you put out I'm surprised I didn't find you any I hate the KZread algorithm because it takes too long before you find a good channels like yours keep up the great work bro you're awesome

I've finally caught up again after not watching since the haitus. Glad to see you're back uploading and you seem just as happy. Really excited to see you uploading more and see the journey that you take these cars on and whatever other cars are to come in the future!

Hey, Robbie I just started watching you, like literally this is the first video I've watched, but I'm really enjoying your content and about to go down a rabbit hole in your Genesis content. Keep up the good work. Much love. -Bryton

Haven’t missed a video yet and I love to see Robbie back

One of my favorite videos in a while. So hyped you started uploading again I subbed when you posted the first civic video and have been hooked since

Videos valid asf your funny asl and y’all are definitely relatable in what you do keep it up 😂 love the bloopers at the end too

one of the best videos about turbo sounds, only missing difference with soft and hard spring in bov

Having done the same things, running no BOV will trigger DTC P2261 that will limit your boost to 5 psi until you clear it 😅

@zanderx7

Жыл бұрын

That’s neat lol

@ian.williamson

11 ай бұрын

You mean when they put on the block off plate? Do you know how someone would go around that psi limiter?

@julez5114

11 ай бұрын

@@ian.williamson aftermarket ecu or a good reflash from a skilled tuner. I just run a BOV for now, stock is blocked off.

@Louzahsol

9 ай бұрын

@@ian.williamsonwith a tactrix cable you can manually disable codes

@unfairbass3944

7 ай бұрын

Just bypass the bov solonoid

He Robbie sorry about crapping on the Z I was just giving a suggestion. Love the videos, you give me hope on working on cars with not everything I need or have. I appreciate what you do in this community!! Stay committed!!!! ❤

I used to watch this channel all the time everyday couple years ago but for some reason KZread stop stopping em now there back on my feed !!!!!!

I built a custom intake for my 2014 Jetta with the 1.8T and it sounds awesome ! Love building intakes lol

yo this is sick, I have a genesis and it’s pretty modded out! Can’t wait to see what y’all do to it

I run a super tight recirc valve on my Subaru. Also have a nice, fat, aluminum turbo inlet. I get a nice BOV sound on full boost, but get some sweet compressor surge noises otherwise.

Best video so far and the chart had me weak haha 😂😂

7:50 this is a very accurate representation of a rotary engine xDDD

This has become one of my fav channels

Awesome content love the shananigans 🔥

i promise you the second i put cold airs in i went from 24 mpg to 18 mpg average. its just so fun to hear. not too much not too quiet

My Mk8 Molf R makes hella noises with just a intake swap! Made me so happy!

this was me in my veloster today driving in the mountains. just a cone filter on the stock intake tube givin' that good SUCC and PSHHH

I was messing around with my 2.0 TDI and found that if I pinch off the BOV hose I get crazy turbo flutter. Then I tried driving with it like that, and got put into limp mode haha

Nice video really enjoyed watching it then other car video's

I own the two sweets 3.8 and 2.0 I enjoy your channel and your experiences, keep going

@ian.williamson

11 ай бұрын

If only the coupe got the 5.0 😩😩

Thank you for this, I want some sound outta my Jetta but don’t know which would be best

the cubert joke was class LOL

I love my genesis turbo noises I’m running a HKS blow off valve and cold air intake on on my bk2 pushing 24lbs of boost. Turbo noises for the win!

The janky intake like the first thing nice one❤️👍

so the OG 5 clyinder quattro cars have a reserc valve that redirects the air directly into the turbo inlet. its also very large, so from the factory they make a beautifully violent "PSSSHHHH", and if you pull the vaccum line to it and plug it with a bolt of the ignition cover it makes group B "stututututututu" sounds

I was told, the reason the put re-Direct valve.. I think it is.. is just what you said.. It aids the acceleration.. but it sounds much better to release into the atmosphere.. I have a 2016 Veloster Turbo, and the hose for re-circulation valve is blocked off.. so it vents out.

I love who you hung up the British Columbia license plate up! We miss you guys

The pipi part of the scale was killing me😂😂

Going from e90 n54 twin small turbo to an f30 n55 big turbo and now hearing the turbo uff i agree 100% turbo sound not good for fuel economy 🤣🤣 love hearing mine spool up!!

@xriot1752

5 ай бұрын

its also not good for the health of your turbo, I have an n54 and I would love to hear stutututu all the time but i am NOT trying to replace my turbos any sooner than needed lol

Nice one brother big like🔥💪🤝🙏👍

Sounds really good! Abby is seriously going places! Gotta get a bigger turbo on there next :)

They make it so cars don't make any intake or blow-off noise because especially here in the states people will take their car back to the dealership over any noise the car makes even if it's supposed to make the noise

The block off plate with no bov is causing pure turbo surge (nowhere for the pressure to go except load the surge line and escape through the compressor) Engine can handle the couple more psi more then the turbo seals/thrust bearing can handle the aggressive pressure escapes/increased temps. Cool thing to try, but wouldn't recommend sticking with.

The guy that says that’s a beautiful filter than the other guy says shut up! Lol that gets me every time. It’s so funny you guys are funny I followed you.😅

As a built big turbo genesis coupe owner it only gets better from here 🤣. If you want oem plus go stuffed turbo and alpha speed tune just keep in mind the bk1 rods are the weak link. Torque is no friend.

I am currently printing a siren howler trumpet for my GFB BOV. 🤣 🤣 I had this idea for years but never tried it.

13:50 I understood that lol

What was that pipe cutting tool? made it look so easy

that fucking segway into the manscape had my crying i laughed so hard

I have a intake for the wooshes, and a buddy said it sounds like it was sneezing when I let off the gas haha

My 2020 chevy trax 1.4l turbo has no turbo sounds but 60mph + punching it takes off surprisingly good just would like some sounds at some point

That is a perfect Darth Qbert

you're back!!

On mine I didn't need to put a plate. I just got two rubber chair leg fittings and clamped them on the fittings that suck and blow and got the same sound you get at 10:08

Hey man it may not be big but that's where the tongue game comes in LOL

Winter is coming ! Boost season is upon us 😊🙌

I've got the Pipercross Intake for my I30N Fastback Facelift and it makes stutututu :D

Omg robbie please get a rotary!! Bonus points if its an rx-7 with the pop ups

I'm running the gfb 50% recirc 50% atmosphere on my o2 wrx, not bad with just running cobb tune but peace of mind with a pro tune is the route i ended going. running hks intake, tomei intake pipe, mishimoto intercooler pipe, catless on my quest for sounds. still doesnt sound as good as your set up but its very fun. stock tdo4 duh

@GainsGoblin

6 ай бұрын

How much did it cost you to tune the car with the bov and what was so annoying with the cobb tune? really appreciate if you can give me some insight

It's not just for fuel economy. There are compounds that need to be recirculated back into the intake so it goes through a cat

2 step next. 😂

My TT makes that noise with its diverter valve but i do like making the pshhh noise 😂

Always recirc. Different manufacturers and spring rates change the noise enough to find something that you like. Never failed me yet. This was a good watch

@tracklizard4018

Ай бұрын

Use whatever is required. If the car uses a airflow sensor you have to recirc or it'll die on hard braking due to flooding the engine. It will also run rich in general even if it doesn't die.

I'm hoping the cold air intake makes a difference. A 🦌 removed the stock one and insurance paid for the cold air intake and filter with 5x the surface area.

the sound they make is what made 10 year old me fall in love with them

There's absolutely no damage being done to your engine using a block off plate. If anything, it would be your turbo being damaged, but even this isn't true at all. Multiple youtubers running no BOV/BPV and their turbos last well over 100k miles. Running a block off plate, which is known as "compressor surge", is commonly believed to cause harm to the turbo. However this is nothing but a myth, if you actually dig deep into the subject on google. Turbo's are built a lot better now then they were back in the day, and damage to the turbo is minimal, if any at all. Also I would highly suggest anyone who is trying to make their turbo spool louder, to look into the t51r mod by OCD works. It is a mod to your turbo that basically makes it to where any turbo will sound like a freaking jet engine while spooling, and make it super loud, with no alteration of the function of the turbo itself.

I just started the vid and the sutututu is the best already

i have the forge bov and i love it

“Baaaaaa awww” lol

You should polish to headlights of car.

Cool vid

No 50/50 diverter valve (half BOV/half recirc) test?

plate has balls. that last ain as tuff

That one dose come with bov and most stock turbo cars do but they are recerculated so you don't hear them 0:15

I used to have a ford 2013 ecoboost escape SE. I threw a K&N cone filter on it and suddenly it made all the turbo sounds. people sleep on their intakes.

Wait until you try the external wastegate-screamer pipe combo

Holy shit the block off plate made me buss

Genny gang! 🙏🏽😮‍💨

Greetings from SoCal brotha✊

I really need to try this on my fiesta 1.6tdci :D But unfortunately it's very hard (if not impossible) to make something like this legal in Germany...

@jaredpursey3791

Жыл бұрын

Only if u get caught✌️👌🏼

We ❤ u Robbie

On the bk2 the only way to listen to turbo sounds its actually getting on itt hard

My E46 would “pshhhhh” because of my intake setup and everyone would ask me if it was a turbo and get all excited and then disappointed when I told them it’s bone stock lmfao

My dad has a Hyundai veloster2017 and the base model stock

Honestly i bought that lawnmower 4.0 because of advertisements and honestly if you can find a discount cupon code its worth it

I wanted one of those before I got my 2010 n54

I didn’t quite catch what he said at the start about the blowoff valves and why don’t they came from the factory

Good content man, good fun and practical education with experimenting.. however id like to state this fact as i see too many 'car guys' say this like they know what theyre talking about exactly. Turbo surge, flutter, stututu, is NOT damaging to your turbo, at low boost levels. Low is generally anything under 1.5 Bar pressure - 21psi, with variance dependent on your engine and turbo size. Furthermore the only time it becomes damaging is when youre running high boost pressures, which in hand will also present the likely case that the high pressure air in the intake can force back through into the engine as well by lifting an intake valve when it should be closed: This is what causes damage - piston colliding with the valve, over revving and lean mixture due to air coming into the chamber when throttle is closed. The only reason i preach this knowledge is because this makes the difference between how sure and confident someone is on their modifications or current state of their car.

@DriftNick

2 ай бұрын

Even if the pressure somehow makes it past the throttle plate it's not going to cause a valve to open when it shouldn't.

I have a 2015 Mercedes gla 250 and it has a blow off valve from factory and I still get 23 to 30 mpg

Really wanna see you do a sou d system in a car

The janky intake like the first thing I did when I had my old mk4 1.8 turbo jetta 😹

See if they have a turbo muffler delete kit it might help sound.

i wish i could hear the turbo spool up

Content we need

the shcuuu sound is the best

Engine shmengine 😂 I’m forsure using that.

Was that an intake into the engine or was it into the turbo

i used to do that with mine all the time, just listening to it is worth having terrible gas mileage

Those man scape shavers are no joke. 😊

one of the vans at my work has a blow off valve and omg i drove like 3 miles and i was constantly making it go woooshhhh

the only good blowoff valve is the Type S Its legendary and just sounds cooler than anything else

17:23🤣🤣👍🏻

I have a factory bov built into my intercooler😂 it makes swooshy sounds

@MechEnthusiast2023

Жыл бұрын

And I still average 26mpg when I drive wild

What do you think of the hks bov ?? Do you like it ?