Battle of the Bad A$$ AR10's - LMT vs HK
Ойын-сауық
Unfiltered MAC on Twitter: MAC_Arms
Check Out Our Specials: linktr.ee/militaryarmschannel
Join Patreon and support MAC! www.patreon.com/militaryarms
Follow and support us on Utreon!: utreon.com/c/militaryarmschannel
Follow us on Rumble: rumble.com/user/MilitaryArms
MAC T-Shirt Store: ballisticink.com/collections/military-arms-channel
Modern Gun School: www.mgs.edu
Challenge Targets Discount Code: MAC556 (www.challengetargets.com/SFNT.html)
The HK MR762 and the LMT L219A1 are two rifles competing for that high end gas gun AR dollar, but which do I like better and why? The AR10 is an iconic rifle in .308 that many Americans love. So we put these to titans against each other to see which comes out on top.
#ar10 #hk #lmt
Пікірлер: 373
I can't afford admission for this playground lol.
@hopewilliams6705
Жыл бұрын
Get a Diamondback DB10 or The Ruger SFAR if you want a smaller lighter rifle
@30rdmaga
Жыл бұрын
Me neither
@VCBird6
Жыл бұрын
Your wallet must be this fat to ride 😂
@BenBartlow
Жыл бұрын
I just bought a psa ar 10 that's the most my budget will allow and that under the condition my wife doesn't know. If only I had a youtube channel to justify stuff
@30rdmaga
Жыл бұрын
@@BenBartlow I love PSA but I can't pay cash so my wife knows exactly what I'm paying for everything. Otherwise I'd have a few more things from PSA stacked up by now. Lol
You can get LMT for 3.5k mloc You can have it in 13.5, 16, 18, 20, 24 barrel length. Literally 1min to swap. You can have it in piston as well. Best platform for lasers. Any stock you like. Widely available magazines. Fully ambi. No issues with support in US. It's like NO decision :)
@brighthought11
Жыл бұрын
this
@JohnRambo-zz6gy
Жыл бұрын
Not with LMT’s reign of QC issues. In the past yes. Until LMT start being more competent, hard pass
@willa1975
Жыл бұрын
I chose LMT for my pre-AWB panic buy for that very reason. It gives me a lot more convenient options, especially since I won’t be able to buy another rifle for the foreseeable future.
@swatbwana
Жыл бұрын
Agree 100% I love my MARS H, but my OBR outshoots it every time , except for 147 grain ball , the LMT LOVES it always hovers around 1 inch for good ammo..
@ceoelektronika8604
Жыл бұрын
I'd like to see some 30" barrel rifles that were in smaller-than-.50 caliber size. Cheap increased accuracy and muzzle velocity. Yet no one does it. How about 40"? Also reduced muzzle flash and blast.
I paid 2850 dollars for my LMT in September of 2012 with a 16-inch chrome lined barrel and its still a tack drive.
I'd take the lmt based solely on magazine type and availability. I always had good luck selling lmt rifles to people who do their research and have the money.
@rustys.1070
7 ай бұрын
yeah because magazines melt after a few minutes or uh erm something
I would be interested to see the comparison with the LWRCI REPR MKII
SR25 needs to be in there too!
@williamhedrick7983
Жыл бұрын
He never really reviews KAC stuff except for the suppressor
@LinearTactics
11 ай бұрын
Yeahhhhh KAC gets no love on this channel
Glad to see this video! Im a big Hk Mr762 fanboy and have been watching your older content as of late on the HK because I just bought one! In fact its sitting in my lap as I type this as im fooling around with slings atm. Its wearing a Minox Zp8 and theres a Vortex Razor 1-10 and a convex butpad in the mail for her later this week. Ill be taking a defensive rifle class on June 24th in which ill run 400 rounds through her in a single day. Itll be epic! Thanks to their gentle recoil, itll also be a piece of cake. Love the HK!
Both amazing rifles! Thanks for the video.
I like the quick change barrels of the LMT’s. I have a 13.5” 1:07 pin and welded 308 that I can change to a 20” 6.5 creedmoor in less than a minute. Definitely fun to go between the two. I have never shot the HK but hope to soon. Love the content!
@josephh.8075
Жыл бұрын
What muzzle device is pinned to it?
@bradweber4869
Жыл бұрын
@@josephh.8075SOLGW NOX
"Wow, what a showdown between two legendary AR10s! Both the LMT and HK put on an impressive performance, but in the end, it's clear that each rifle has its own strengths and weaknesses. The LMT's accuracy and reliability were truly impressive, while the HK's robust design and advanced features definitely stood out. It's amazing to see the innovation and craftsmanship that goes into these weapons, and I can't wait to see what the future holds for AR10s. Thanks for this amazing video, it was truly a battle of the bad a$$!"
Really enjoyed, good info, thanks
I use the HK with the Steiner 5-25 for almost 8 years now. It shoots precisely, be it on 50, 100, 300, or 1000 m. I prefer the 168gr rounds. For training purposes, I use the cheaper 145 gr rounds, which are not as precise as the 168, but good enough. I love the rifle for its perfect finish and usability. It shoots much cleaner than a direct impingement rifle, which, for my taste, must be cleaned to often. With cleaning cycles of 1000 - 2000 shots the HK is a reliable an precise partner.
LMT. I'm a sucker for monolithic rails.
@frozennorth3426
Жыл бұрын
yeah. it’s the way.
completely agree with the atmospheric conditions change accuracy. I've shot the same ammo out of my 6mm GT on one day that was quarter inch groups and on another day just under 1" I've had really good luck with the lmt though, i have the stainless barrel in mine and it's right up there in accuracy with my kac SR25. unfortunately i don't have the HK so i can't compare it to the those two or my lwrc repr's
Recently tried to buy a colt with a monolithic upper chambered in .308 Winchester but daaang that thing is heavy. Great video as always
My favorite content of yours… plus I’ve been super into .308 DMR/battle rifles lately.
I’d like to see how the Seekins SP10 that got the SOF contract stacks up against these? 🤔
I really appreciate your work and your research . Great reviews.
Great vid!
I've been watching your channel for a while now and I just noticed your "range rules" sign. Now I'm gonna order one for my range. 🤣
I'm saving up for the Ruger SFAR. I know it's getting a mix review but, I've loved Ruger since I was a kid and the SFAR really does seem to be the "magic rifle" and a solid foundation to build up. I'll work through any issues that pop up.
@aaronfarnsworth7653
Жыл бұрын
It has some unique ways to handle the 308 power in a nearly 556 size package. You've probably seen the other KZreadr having troubles with the bolt hold open. I've got to find that vid again to have him check something else on it. He seemed to retract the carrier as far as possible with the charging handle yet it wasn't far enough to lock back. I think the charging handle runs out of travel too soon. I think the carrier under recoil may travel far enough but not entirely reliably. It may be that it cycles just a bit too fast for the magazine to reliably lift the hold open into the way.
@dabears52501
Жыл бұрын
I got a 16". 165 rounds in & ZERO malfunctions. The things a pleasure to shoot & the trigger is phenomenal for a stock trigger. Hope you can find a SFAR in stock. Mine was 4 weeks backorder but worth the wait!
I'm doing my research into buying my first AR10 and every time I think i've settled onto something I always get my opinions swayed. First was a KAC SR-25 (i have no urgency for it so i figured whenever parts came around i'd bite). Then,I was set on the LWRCI REPR. Then i looked into the MR762, and now I'm looking into not only the LMT but also the Sig 716. Not to mention the plethora of cheaper options like the Ruger SFAR, The DDM5, the PSA 10 and more. The more research i do the more i get lost
The Daniel Defense .308 is no slouch either.
@charlesmullins3238
Жыл бұрын
My dd5v3 has absolutely blew me away. Been handloadin for 2yr for it and can put 5 175smk on a 20oz lid at 100.. made 1st rd hit at 1000 also
@JohnRambo-zz6gy
Жыл бұрын
@@charlesmullins3238 my DD5V4 is freaking amazing. Hasn’t missed a beat yet. Just put an ATACR FDE on it and it matches the Milspec brown finish almost perfectly.
@charlesmullins3238
Жыл бұрын
@@JohnRambo-zz6gy I run 3x15 pst sfp and 419 hellfire…I’d love to have the 20” version…mine likes the 178gr hornady match for factory loads but my 175smk over h4350 is baby bear soup..7rds in .75”..I bet that brown looks killer
@pilotincommand85
Жыл бұрын
Truth..few semi auto rifles can compete with the accuracy and precision of the DD5..especially with a chrome lined barrel
@joquin4618
Жыл бұрын
Yeah, I would love to afford a dd in 308… but I’ll have to run my PSA AR10 in 308 cuz I’m poor 😅
I have an IMT li29a1 it’s heavier than it needs to be, but i get consistently tighter groups than what was shown in this video
@jconcord6580
5 ай бұрын
everyone does. I get tighter groups with my ak.
Ive been more than happy with the 716i, which i barely afforded already.
@williamhedrick7983
Жыл бұрын
I’ve been hearing a lot of good things… The mid length gas system seems to be perfect on the 716i I have not heard of any major issues or horror stories with these rifles.
@michaelpereira808
Жыл бұрын
For what's it worth I've been running mine for two 🦌 seasons and love it. Granted I've swapped in Phase 5 charging handle and Triggertech 308 2-stage adjustable trigger.
@michaelpereira808
Жыл бұрын
@@williamhedrick7983I believe it's a rifle length.
@nataliedeyton6829
Жыл бұрын
Agree …. Only thing was the trigger…but that was more me than the trigger 😂
@scaldedape6213
Жыл бұрын
I have one too and like it a lot.
love my armalites and aero M5’s - but good lord - so heavy
Now HK vs SR25
@columbiawarmachine9795
Жыл бұрын
My hk m762 is awesome I did a video on it I love it
Im too poor for this so im using Aero M5 receivers, but an LMT heart (BCG) & Criterion barrel (once it comes back in stock... anytime now Criterion)!
Gen 3 psa 10 probably net same results but lighter and 1/7 the cost
@rustys.1070
7 ай бұрын
lmfao
@Washyourbellybutton
5 ай бұрын
@@rustys.1070He's technically right. Actually range results and testing between expensive and inexpensive firearms are often literally identical. You can do it for yourself actually. Go get yourself a PSA and a DD,LMT,HK or whatever expensive option you want. Then go to the range and compare results. Gotta love science.
@rustys.1070
5 ай бұрын
@@Washyourbellybutton lmfao
@locomoko3322
5 ай бұрын
lmfao
@justinmillerbb
2 ай бұрын
Similar results, not so similar reliability/durability🤷🏼♂️
I can't play in this game either. So yes, Ruger, my favorite company would get the nod. My only gas gun in this class was an M1 Garand. I had it zeroed at 300 yards open sights. I could ring the 25' gong at our range all day long. My option now is to assemble a DPMS pattern AR-10 piece meal and hope I can shoot it as well as I did the Garand. That's my standard.
Stumbled onto a H&K mr762a1 barely used for $2800...it was so bad ass I bought it. I am learning about it now, maybe my fav gun now
Hey Tim, how does Daniel Defense’s DD5V4 AR10 stack up against LMT and HK? Just rough opinion?
The HK is almost 50% cheaper in Europe due to import trades in US. Same thing with all the US made rifles that are 50% more expensive in Europe than in the US. So the HK for 3500 $ is worth to buy it but for 7 000 no way.
@damvah4045
Жыл бұрын
The exact reason I go for HK every time... I dont understand americans, why would they even bother with H&k. THey have so many different manufacturers to choose from (LMT, FN, DD, KAC...) , while we in EU only have H&K - high end rifles at "normal" prices .
MAC the HK MR762 LRP has a heavy profile G28 barrel in 1-11.25 twist vs a regular MR762 in 1-12 in a lighter profile. There is a difference in the LRP vs Regular MR762
Thanks for the great review Tim! been following you for many years and you never disappoint!!! .... that being said, I own both rifles, love them both and both are accurate, but I prefer the LMT. The ease of parts availability, SR25 magazines (which I have many from my KAC SR-25), change of barrel.....and to be honest I get slightly better grouping from my LMT at 100 yards. I love my HKs but I think that they are incredibly over priced.
@jconcord6580
5 ай бұрын
this is a bot comment.
Personally, I would love to see a comparison between a Ruger Scout Rifle compared to a semi auto .308. The bolt action is obviously slower , but accuracy wise, it may be entertaining. I have a synthetic stocked Ruger Gunsight Scout as my Doomsday rifle , and would love to know how it compares . I'll be willing to loan a rifle for this test with a Burris Scout scope for comparison, ad long ad you don't keep it for to long .
Idk... I'm still glad I traded my LMT for the POF. It shoots just as good groups and is much lighter.
@TehDFC
Жыл бұрын
Interesting-I did the exact opposite-it was a good shooter but my LMT is a hair better and many many hairs heavier.
@justanotherinternetexpert7743
Жыл бұрын
I love all my POF-USA rifles, i own 4 of them, a 16" P308 EDGE, A 12.5" Revolution in .308, a 10.5" P-415 in 5.56, and a 10.5" Renegade Plus in .300blk. I also own one LMT Mars 16" in 5.56, ...I bought it because of how much Chris at Small arms Solutions talked about how he thought it was the best rifle on the market, long story short...I was incredibly DISSAPOINTED in the LMT. My POF, LWRC rifles, and a couple others I own in the same price range all have way superior fit and finish compared to the LMT, the LMT is heavier with its monolithic upper, and the ambi mag release does not work on the lower I am on my 2nd lower and both had the same issue, and I have talked to a few other owns and found out it is a common problem with the design of LMTs ambi controls. I suppose if someone bought a LMT and never bought any other rifles they may thing the LMT was great but mine really made me lose respect for Chris at Small Arms Solutions. Which makes me sad, because I KNOW he is a knowledgeable dude when it comes to these weapons, but I have to think he let some sort of person bias in when recommending LMT as the best AR15 on the market. As for as D.I. gas guns go, My POF-USA RenegadePlus blows it out of the water. I would put the LMT on the same tier as say Aero Persicion, as far as fit and finish, now Aero makes some good decent guns, but they don't cost $2500(what my lmt cost). Don't get me wrong the LMT shoots fine, but so does my 3 Aero Persicion bulds I put together on my kitchen table.
@TehDFC
Жыл бұрын
@@justanotherinternetexpert7743I've not had any of those issues-or any issues at all-I run KAC light rigs and LMT heavy rigs and I've run them all. YMMV.
@justanotherinternetexpert7743
Жыл бұрын
@The DFC I am glad you got some good guns, I did not. I talked to a few people on the lwrc forum I belong to, and they had similar issues. One thing I will ask you, have you ever compared a LMT or KAC to a LWRC or POF-USA rifle?
I think it would be worth trying some 155 FGMM. The 155 inside of 1,000y makes more sense. Compare drop and drift charts and you see it shoots flatter with pretty much the same wind. Less time in the air as well.
Do you like the SFAR more than the M5E1 from aero? I know I like the M5E1 more than the tread.
I'm gonna refer back to your video on external piston guns, more specifically POF. They are all overgassed, except the $7000 guns. You poopooed on em, I tuned and love my short stroke piston.
I know us regular schmo's that buy budget stuff can aspire to these pinnacle style 308 gas guns. but my 16" S&W MP10 seems to do just fine for my capabilities. I spent a crap ton of money on ammo and mags and a good LPVO from Vortex. the thing is noticeably heavier too... put an aggressive brake on it to tame it some but now that it doesnt kick the shoulder as hard it kicks the ears even thru the ear pro!... geez that thing is loud!
I chose H&K mr762 with an NF atacr on top I just bought extra parts because of the proprietary thing.
You should try sierra matchking 150gr/155gr - they will shoot halv moa all day long, ive never got my HK rifle to shoot good with higher weight bullets.
I want the LMT only for the totally monolithic upper, if only other companies like Aero made them like that. I want it to be super strong, even if they could attach the buffer tube to the upper.
@rad_lad_2715
Жыл бұрын
The monolithic upper is patented, colt got sued by LMT when they made monolithic upper back in the mid 2000s
@albanfisher6857
4 ай бұрын
@rad_lad_2715 wow that's trash
Nice 💪 ! Didnt have to rub it in tho lol. Keep up the great content!
The lmt actually has ammo supplied in the British military that is specifically designed for the rifles twist rate and barrel length, 155 grain
Could you compare these to a scar 17, sig spear, and a Daniel defense 308?
@JohnRambo-zz6gy
Жыл бұрын
The DD5V4 is an amazing rifle. I love the SCAR17 also. I can’t trust Sig anything
I’ve got $4200 in a decked out dd5v3 with 3x15 viper..bipod..stock..light ..brake and i honestly say it’s a 3/4” gun with some tighter than that…I’m usually just a 1.5” shooter..I shoot at 20oz lids I fashioned into cardboard at 100yrds and put 5rds on one…hard to do that with a bolt gun…btw get that 110 kit from copper and at least show it off..
The Sig MCX Spear in .308 falls into the same price range. I would like to see how it compares to these two OG battle rifles.😊
@noncomplier5385
Жыл бұрын
Umm yeah, then theres the XM7, which costs around $7k and its a .308 and not even chambered for .277 Fury yet... I'll stick with the HK for that price.
Do you have a new POF AR10? How does it stack up to these and the Ruger SFAR?
LMT has recently been adopted by Swiss Special Operations (known as STGW 20).
I love my mars and MWS. In saying that LMT since they moved and ramped up contract development , their qc has been rough for the civilian market . Purchased a 20 inch barrel for my mars and finally got it working after it was sent to me brand new with a shifted gas tube that was causing hot black hills ammo to barely cycle. Gun felt like an airsoft gun until we fixed it
@SUPREMEKEYRON
Жыл бұрын
😟
"Drug the rifles out here to see" Even Rob Ski doesn't drag guns any more 😂
Wanted HK, but, due to mags and barrel options, I went with LMT. The only thing I don’t like about these ar 10 platforms, maybe it’s just lmt, I would like to shoot mostly m80, cheaper bullets, out of a chrome lined barrel. The 147-149 grains typically perform better with a slower twist rate. Lmt doesn’t make chrome lined barrels with slower twist rate. Only their SS options have the 1:11.25. Their chrome lined barrels are all 1:10.
Like HKs of course but have a couple of LMTs, and multiple barrels. 7.62, 260Rem, 6.5CR.
where would you list the SFAR compared to the rest of the AR10's? In the top 10 or top 5 ? the price is the driver and curious where it stands in your eyes ?
@jjgriffin3275
Жыл бұрын
you answered at end of video, thanks
do they have faster twist rate barrels that would do better?.. or at least longer barrels?
Looked at both of these but ended up with a DD5V4 for adjustable gas block and 18" bbl
@e7tegt503
Жыл бұрын
Same here. It’s the “cheapest” rifle I felt would be 100% reliable.
Money not being an issue I’d pick the HK. But in reality it is which is why I only have a PTR 91 A3S for my 308 rifle. Set up with the wide hand guard and HK bi pod. A crap ton of magazines for it and a couple thousand rounds of the MKE ZQi ammo 7.62x51 which I got all from local Walmart’s back in the day for .50 cents a round. My next rifle in this caliber with probably be the Ruger.
@noncomplier5385
Жыл бұрын
If money wasn't an issue, I'd pick a HK PSG-1 a semi-auto actually classified as a "sniper rifle".
Have a LMT in 308 & 6.5CM; love it but a hog in weight vs newer non AR-10 308’s
My ruger 762 shoots the fed premium 175 gr sub MOA at 100 yards. 5 shot group.
I would love the HK, with or without the long range package. At this point though I would just like to get an AR-10 so maybe the SFAR is what I will end up with.
Had to watch this in private so my DD5V3 didn’t catch me cheating.
I have an early MR762 and an LMT 556.
Hi Mac. May I ask you: Where did you get that "Range Rules" sign? It is great!
Are you still partial to the Tavor 308 bullpup for a battle rifle?
Although no longer made, how does the Colt Modular Carbine (308) stack up against these?
I'll choose the Type A MSR or PWS MK216
@tomharper8351
Жыл бұрын
Type-A is an awesome rifle
Hk just cause.... however I own the Ruger SFAR, that you broke in on your channel and it is awesome!!
$7000?? I thought $1000 for my DPMS LR-308 was too much when i got it a decade ago 😂
@wildmanjeff42
Жыл бұрын
DPMS have great rifles.
@brandonschwietzer8757
Жыл бұрын
The good thing about the LMT is you can build one for prolly half that. And the LMT requires a T30 bit and a torque wrench to install a barrel. Literally adult legos lol
@luft_964
Жыл бұрын
The standard mr762 without the scope and bipod and case drops down to 3500
@jasonlopez4855
Жыл бұрын
I got mine DPMS LR-308 in 2017 for $650 new and got ODIN'S work hands hard and brake 7 is all it needed. 👍
I built an LMT AR10 with all lmt parts, including a SS 16 inch barrel, the ambi lower, and the monolithic m-lok upper. The only thing different from a factory mws was that I went with the b5 SOPMOD stock instead of LMTs overpriced SOPMOD. All together, it cost me about $2500, saving me about 1k. It's been reliable and shoots about 1moa with match ammo, but is way too heavy, coming in at over 13 lb with a scope and bipod. The ruger definitely looks interesting by comparison. Even the DD, and Sig Tread seem like they would be lighter and a better value.
MAC, what do you think about the SA Saint Victor AR 10 .308?
I’ve shot the H&K and would not even fathom trading my Sig716i for it. Shoot MOA with XM80. Not only accurate but it’s a lightweight tank.
@rustys.1070
7 ай бұрын
why do all these fake cope comments read exactly the same lol
@ZMan0718
7 ай бұрын
Prolly one of those guys that buy the most expensive rifle thinking it’ll make them a solid shooter lol
@rustys.1070
7 ай бұрын
@ZMan0718 lmt and sig cap out at 600 yards. That's good for your lower tier type but I have to hit at least at 1000 yards
I’d go HK it looks the more up to date of the two
My MARS-H is my favorite rifle to shoot. Honestly, if it wasn't for ammo price, I'd pick it over my MARS-L almost every time, chonky weight and all. I have an NZ contract surplus barrel, 20" SS barrel, and accuracy is excellent compared to every other rifle I have but it's picky on what ammo it likes, in temrs of accuracy. But it cicles almost everything except for the hottest .308.
@joquin4618
Жыл бұрын
Nice 👍
To be honest, glad to see an American firearm company getting contracts since they've been largely snubbed by the U.S. military.
Should do a value comparison - low to high: * Value - PSA PA10 * Budget - Ruger SFAR * Main - Daniel Defense DD5v3 or v4 * Military - LMT or HK * Gucci - LWRC Or something similar. Compare weight, warranty, accuracy, reliability, etc.
Curious why you didn’t add a knight’s SR-25 to this Mac!!!
I have a gen 3 psa with a 20 inch Gorilla machining 308 barrel seems to work fine
Tbh I think I'll save my money and go with the POF revolution which I could get in either DI or piston so it could be set up either style for less than half the cost of the HK LRP and a solid 1.5-2k less than the LMT. Not only that but when mentioning the Ruger SFAR it competes in size and weight with the Ruger. That said I'd take the Ruger in a heartbeat too because I've had great luck with the 556 model being fairly accurate with a fixed FSB esp in the role of a patrol/combat carbine. Right now I'm saving for the POF and whem the my lgs can get an SFAR in again I'll def pick one up to play with. The Rev is gonna be my hog rifle for sure though. Got a can I'm waiting on final approval for that will be right at home on it.
LaRue PredatOBR
If i had to pick one, i'd definitely pick....my tavor 7. ever since i put a lpvo on it i've adored it.
It came down to these two rifle back in 2015 and I chose the LMT but I've always regretted it and wish I had got the HK instead. I think the HK is better looking, better built overall, and I made a big mistake in not choosing it. 😞 My LMT averages 1 1/4" groups at 100 but has grouped 3/4" in some cherry picked groups with 175 gr Gorilla ammo. Tim, I remember your 1st HK MR 762 with that Leupold scope. Damn, that rifle was incredibly accurate and would outshoot any AR-10 I've ever seen! 👍
@pilotincommand85
Жыл бұрын
Funny you say that..I also narrowed down to these two but I went with the HK and don’t get me wrong I’m extremely happy but there’s that constant nagging voice saying…what if..maybe I’ll have to buy the LMT to satisfy that feeling who knows lol
@Sagittariustoo
Жыл бұрын
@@pilotincommand85 Hell, I would still like to buy the HK too but I hear they're currently banned from the good ol' USA. 👎 I really love JP also and actually think they're the best looking ARs ever made but the one I want is $5,000.00 + for the rifle alone. 🤦♂
@pilotincommand85
Жыл бұрын
@@Sagittariustoo don’t quote me but I don’t think they are banned. I got my HK this past December in the Dallas area..I think they did try to restrict import of certain configurations but still plenty available. PSA is selling the LRP package now in stock
@Sagittariustoo
Жыл бұрын
@@pilotincommand85 Thanks for the information; I heard they were banned from a couple sources here on KZread and we know how reliable that can be, lol. I need to start checking things out better than automatically believing something here on KZread.
@JChavez12
Жыл бұрын
You chose right man! I own both rifles....both are great rifles, the HK has the cool "German" factor and now in days is harder to find but also at the same time, parts are harder to come by and SUPER over priced! both shoot really good, are accurate, but I prefer my made in the USA LMT !!! just the fact that you have the barrel change and conversion and SR25 mags....LMT all the way!
The MR762 is a work of art. It shoots good, but the engineering and overbuild of the HK is so badass all day long.
@patjoslin4087
Жыл бұрын
Im sorry but the LMT isn’t in HK’s league. Like you said, HK makes some bad ass rifles
@ShaggyPWN
Жыл бұрын
Yup! I have an MR556 and MY GOD it is just something else
@alexc6582
Жыл бұрын
@@patjoslin4087 isn't in its league my ass lmao
@rustys.1070
7 ай бұрын
@@alexc6582 yeah LMT has two contracts and HK has around 20.
I’d go LMT for the money especially if there were unsuppressed cycling issues with the hk.
LMT all the way. Never had an issue with my MWS.
With nearly identical accuracy, and better modularity from the LMT, and at nearly half the cost; LMT. I love HK stuff, but they are way too proud of their price tags for what you are getting.
@rustys.1070
7 ай бұрын
tim pulled most of his shots with the HK. he's partnered with LMT through his FFLs. not many people seem to know this.
why no sr25? out of all the rifles on your channel I can't recall anything knights?
You should throw the reeper and kac in that mix
barrel swap on the lmt... but who doesn't covet an HK? I have a first gen MWS so im biased, but I would really miss swapping barrels at a rang day. I also had an early ring issue and was treated VERY well by lmt.
In a perfect world I'd buy the Sig spear over these but given these choices I'd go for the LMT. Lighter and a monolithic upper.
@rustys.1070
7 ай бұрын
you're an airsofter aren't you
@kcv5716
7 ай бұрын
No. Never played. Played in the Open Afgani Division though. Different rules.
I'll stick with my Wilson Combat home build. Close to the Recon Ranger but with some upgrades.
I have the Larue version and it shoots better groups than both of these with many versions of top quality factory loads. It's heavy though.
LWRC REPR needs more screen time :P
Lmt all day. If u wanna convert to piston u can. But the barrel Swap alone was enough for me to get the lmt.
I’d rather go with the American made LMT. HK’s are HK’s, but I think they are overpriced.
@rustys.1070
7 ай бұрын
that's because you'vec never shot one
Where can I get a handguard like the one on the H&k
I’d pick the PWS MK216 Smooth as silk recoil and extremely accurate. Half the price and every bit as reliable doesn’t hurt either.
@jason200912
Жыл бұрын
Pws is known for 2 moa or higher accuracy. Garand thumb had the same results
@1AbominAble1
Жыл бұрын
I’ve owned 6 of them, still have 5. My 308 was well under MOS until I had a griffin suppressor mount pinned and welded on. I think that they over torqued the mount and it opened up to a 1.25-1.5 inch gun. All of the 5.56 guns have been excellent.
I prefer LMT bc easy barrel swap
Lmt but I wish LMT would incorporate steel QD slots like HK