*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

I went to advanced Auto this am. They could not change my battery for this model for it was a liability. They recommended professional that charged too much to install. This was simple. Thanks for the confidence.

@89jkondash

7 жыл бұрын

Gyspy Rose i installed it for someone today i work at advance.

Great one handed video, thanks for going all the way through the process

Making use of the kzread.infoUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

Thanks! I just changed the battery for my mom. It took me about 20 mins.

Always disconnect the negative (ground) terminal first and reconnect the ground last. If you're wrenching on the positive terminal with the ground still connected, you'll receive an unpleasant surprise if the wrench comes in contact with any other metal in the engine compartment.

Good advice EXCEPT DISCONNECTING & RECONNECTING THE BATTERYALWAYS DISCONNECT THE NEGATIVE FIRST! RECONNECT THE NEGATIVE LAST!ALWAYS...ALWAYS... ALWAYS DO IT IT THAT ORDER (At least for negative ground systems)

thank you so much I'm 6 hours away with my kids from home and I found this video thank you

Thank you so much for this video we tried for weeks to change ours and had no idea what we where doing.

I was able to see what walmart battery I needed to buy. It saved me an extra 60 mile round trip Thanks .

Thank you so much! I just changed my battery of my 2010 Equinox!!!

Thanks for sharing.. I was going to spend $250 at the dealer shop..luckily I found this video..

Thank You! It would have taken me a few to figure out I had to pop off the plastic clips ,and to push the computer forward. Great video!

Thank you so much for this. Those stupid plastic bits were insane.

Awesome!! Thanks man, I have a 2014 Equinox and it looks the same thing as yours.

Thank you sir, that was a big help!

Thnx i just changed mine today👍🏼

Excellent video thank you very much sir. 👍

Thank you for your great video!

Thanks so much. Great video!

Great video thank you good sir!

Thank you kind sir for this video, you really helped me. Wish we were neighbors, I'd buy you a beer. Thank you

Thanks. Very helpful.

best video I've seen so far (you didn't follow the correct order on disconnecting and connecting the battery but I also never do LOL)

OMG - Thank You Ronster KC - ALWAYS..as in ALWAYS...The Negative cable to the battery is ALWAYS as in ALWAYS ---Disconnect first and reconnect last. Video should be redone. Basically a good video EXCEPT for that incorrect procedure. Speaking from 50+ years of replacing batteries in vehicles.

@pritchups

3 жыл бұрын

Can you explain why

@michaelsandrarodriguez1932

3 жыл бұрын

@@pritchups If you have the wrench on the positive post and touch anything metal while the negative is still attached you will create a serious arc! It's the same as touching a piece of metal across the battery posts. Alternatively, if you take the negative off first you can touch to ground without any shorting. So, remove the negative cable first. Attach the positive cable first when reinstalling.

Excellent vid thanks

Thank You! Thank You! Thank You!

Ha ha what are the odds... you just uploaded this video and I just started looking for this info. I guess all the batteries are going bad at the same time he he... Thanks it did help

Great video question though what to do if you can't get the connecting piece off I saw you had to out the phone down ours seems to be seriously stuck

@420mariajuana420

6 жыл бұрын

Heather Faulk to be honest it was easy for me by just prying it out with a flat tip screwdriver. If you know 100% you are going to change the battery ( meaning you already bought a replacement ) then I guess you can go a bit midieval on it. Sorry for not been able to help , every connector will always have Murphy's law involved in it someway.

How did you get a 800cranking amp battery to go into the equinox? What group size is that? All the ones I'm finding for my equinox have low amp ratings, H5 group.

@cannabliz4988

6 жыл бұрын

Walmart had it...

my battery up and died on me just like that luckily at home , hide and seek battery thanks for the video it helped emencly Replacement over and done ? drove to San Francisco the next day and on the dash the battery saving mode lite lit up is that a good thing or a bad thing ? I never seen it before and it had me concerned didn't want to get stuck in the city

thanks a lot !

Thanks!!!

You always take off and put back the negative terminal first on negative ground cars. Otherwise you run the risk of shorting the positive to ground when taking the positive terminal off or putting it back on.

@jeffault6728

Жыл бұрын

Negative sir. Always negative first on removal. Then negative last on reinstallation on negative ground battery connections.

@BigDsRc517

Жыл бұрын

Always negative first!

I don't know if that socket was made in Canada,. but you sure sound like you were

What's the battery Amber (AH) that l must used to my equinox2011

Agree with Lee Cadillac. Always disconnect the negative terminal first and reconnect it last. This guy gave you the wrong advice about reconnecting the negative first and you could get a serious shock.

@jimr8198

4 жыл бұрын

Do it wrong and you could weld your wrench to the fender.

Bolt under cacing is stopping from removing battery

You forgot to show before you can slid the computer cover shield to the right..there's a retainer tab that has to be pushed down n away before the cover can slide off...you should show this in an updated video...thanks

What a bunch of crap just to get to the battery (no offense to you)..... Seems the manufacturer want's to keep us out from under the hood....lol Anyway....A fine video,...thanks...

@xVenom1976x

7 жыл бұрын

J.R. Zippie they can't charge for labor if you do it yourself

@jrzzrj

7 жыл бұрын

Like...how many people can "do it yourself"?.....

@xVenom1976x

7 жыл бұрын

J.R. Zippie more people than you would think. Most just rather have the dealer do it and don't realize what they're paying through the nose for labor. Granted, if it's a huge job that should be left to professional absolutely but a lot of work that people can do on their own cars is easy enough to do but nobody wants to do it.

@xVenom1976x

7 жыл бұрын

Not only that, but most mechanics make you feel like you can't do it or you'll do some damage they try to scare you. I had a mechanic tell me I shouldn't try to change my own wiper blades because I could shatter my windshield. Was he freaking serious?!?

Thanks bro

good job w that.

Removed NEGITIVE FIRST RIGHT---NEGITIVE finish LAST. Stops Positive tool shorts to anything metal that IS NEGITIVE. NEVER WORK ON POSITIVE WITH NEGITIVE CONNECTED, ONLY NEGITIVE DISCONNECTED OR RISK DAMAGE TO CAR AND BATTERY AND YOU!!

When I bought my battery they told me not to put it in concrete or it will decharge the battery.

@jimr8198

4 жыл бұрын

That's an old wives tale. Concrete is non conductive.

9,800 and you can't be

no biggie do the NEG first Then the POS , Then POS on then NEG last , This dude don't know krap

@aquelmarihuano

7 жыл бұрын

He did kind of explain the mistake connecting it at the end, overall the video helps in changing the battery. I guess he knows how to connect a battery as much as you know how to spell crap.. HE HE ( "This dude don't know shit = This dude don't know crap" ) unless you where talking about Japanese gonorrhea which then it would be good for him not to know it..... LOL!