Not many basketweave stamping videos out there but after this one no need for another. Thank you for sharing! I've learned a lot!

@garyipip

5 жыл бұрын

Thank you very much!!!

Nocturnes were the perfect choice for this kind of work. Well done.

@Eristhenes

3 жыл бұрын

At first I could not tell if it was jazz or classical, then I recognized Chopin :)

Thank you, Gary, for this useful video! Clear steps and beautiful result! Thanks for sharing!

@garyipip

8 жыл бұрын

+Andrei Gotia Thank you very much!!!

That is amazing working from the center. I am new at leather working and I am glad I am still in the study phase. thank you for this video.

@garyipip

6 жыл бұрын

Thank you very much!!!

I just love your videos you have inspired me to do leather work again thank you. :)

@garyipip

9 жыл бұрын

Leksuttaja149 Thank you, happy stitching!!!

This is AWESOME! Thank you!

Gary,огромное спасибо,буду постоянно учиться у Вас.

Such a calming video, perfect trade!!! I wish I have your talent and patience!!!

@garyipip

6 жыл бұрын

Thank you very much!!!

i was so surprised as to what the end result was going to be i clapped!!!...well done , very inspiring !

@garyipip

7 жыл бұрын

Thank you very much!!!

Very nice! Thanks for the demo.

Thank you so much. I'm new at this and had no idea on how to use this tool. You saved me a piece of leather for sure lol. Making my hubby a wallet for out 25th wedding anniversary💜✌

@Chad_Sandridge75

4 жыл бұрын

Well, how did the wallet turn out?

@mr.gulzar9506

3 жыл бұрын

I made a willet with carving to your aniwersry👍

@mistydawn2717

3 жыл бұрын

@@mr.gulzar9506 aww ♥️

@mistydawn2717

3 жыл бұрын

@@Chad_Sandridge75 nice I also made a large wallet to hold a check book he loved them.

@mr.gulzar9506

3 жыл бұрын

@@mistydawn2717 see my carving work

Very nice, turned out wonderfully. Love the sponge ;).

@garyipip

5 жыл бұрын

Thank you very much!!!

Absolutely awesome work my friend!!!!

@garyipip

9 жыл бұрын

Canuck Bear Thank you, best regards.

Nice that basket weave is much easier than it looks. Thanks!

@garyipip

6 жыл бұрын

Thank you very much!!!

Great tutorial, making a leather arm guard for archery.

In this video, I am going to show you how I do basketweave stamping on a key wallet I am working on. The key wallet is simple, two pieces of 1.5mm thick veg tan cow leather glued together, with a brass trigger snap, and a D-ring loop for the keys, and a snap for closure. However, this video is not about how the key wallet is made, but how the stamping is done instead. I hope I can show you how I do it by showing you step by step. Hope you enjoy!!!

@carlosalfonsogutierrez8643

5 жыл бұрын

garyipip hi thanks for the video i want yo know the number of the stamp you use !! Thanks

@mistydawn2717

5 жыл бұрын

I love it and I'm sure my hubby will too Ty so much for sharing this

@davehennon4146

5 жыл бұрын

Where can I get this template?

great results , well done

@garyipip

8 жыл бұрын

Thank you very much!!!

Great idea dude! I did the same with a shoe and a screwdriver :)

Gary, Thanks for sharing and another great video showing you're skill and craftsmanship! Cheers Rahul

@garyipip

9 жыл бұрын

chakda12 Hi Rahul, thank you! I am glad you like it. Best regards.

@chakda12

9 жыл бұрын

garyipip you're most welcome!

Nice way of presenting you have, and my compliments for the work. It looks very nice. There were some things, like where you put the outside line that were very helpful for me, so thanks for posting. The best is when you see the crafter be proud on how job at the end :-)

@garyipip

8 жыл бұрын

+Nicole Lampe Thank you very much!!! I am glad you found it helpful, best regards.

OhMy!! this is totally awesomeness!

@garyipip

9 жыл бұрын

jimli2000 Thank you very much!!!

Stunning !!!

@garyipip

9 жыл бұрын

Dutch Knives and tools Thank you!

even with a few mistakes, you can't even see them! Leather is forgiving! nice job

@garyipip

7 жыл бұрын

Thank you very much!!!

que belleza, me muero de ganas de hacerlo, super felicitaciones eres un artista, gracias por compartir.

@garyipip

8 жыл бұрын

+Lucy Montoya Thank you very much!!!

@lucymontoya5644

8 жыл бұрын

garyipip de donde eres?, las herramientas que usas no se consiguen aquí en Cali Colombia que lastima, pues con tus enseñanzas se aprende muy fácil

@bantamdude

6 жыл бұрын

Lucy Montoya Ala mejor Tandy Leather te lo puede embiar.

Very nice!

Thank you. That was well done, and very helpful.

@garyipip

6 жыл бұрын

Thank you very much!!!

@testpilot77

6 жыл бұрын

I finally tried it myself. This was a plain old archer's bracer. Just plain. And old. I dressed it up with the technique you showed here. Thanks again! c1.staticflickr.com/1/816/39333161670_0b06b9cef4_k.jpg

@testpilot77

6 жыл бұрын

This was my first time trying leather stamping.

@garyipip

6 жыл бұрын

This is fantastic!!! looks great!!! Thank you very much!!!

Very good. Thanks

Great.Thank you

Awesome video. Subscribed.

@garyipip

9 жыл бұрын

uk cats Thank you!!!

Gary Thank you for sharing this enlightening video. It make the process of Basket Weave Stamping a whole lot easier to understand? For a number of years, I have been doing it incorrectly, with poor results, and wondering why ??? Now, thanks to you, I know. Please do more tooling videos! Maybe a simple Scroll or Oak Leaf pattern? Best regards: Dave Pappy Dave's Knives Berwick, Pa.

@garyipip

9 жыл бұрын

Stoney327 Thank you very much!!! I am glad you found it helpful!!!

Bravo molto bello!

Гари Зур Рахмат.!

Nice video

Obrigado por compartilhar seu conhecimento . BRASIL

Hey Gary, Great video! You really illustrate the the basketweave stamping nicely. I have been practicing your technique and it is starting to come around. Question though, do you have a pattern for that excellent key case?

Perfeito seu trabalho. Parabéns!!

@garyipip

5 жыл бұрын

Thank you very much!!!

Wonderful

another very nice piece..............JRW

@garyipip

8 жыл бұрын

+unclejack123 Thank you very much!!!

THANK YOU :)

THANK YOU

good job brother

@garyipip

6 жыл бұрын

Thank you very much!!!

Nice video 👍

@garyipip

5 жыл бұрын

Thank you very much!!!

where do you buy your tools from? and are those toyo no.606 snaps anygood? Been looking for some decent snaps.

Thank You Good video

@garyipip

9 жыл бұрын

Thomas Wilson Thank you Tommy!!!

Nice nice nice! I'll try one for myself and see what'll happen

@garyipip

4 жыл бұрын

Thank you!!!

Very nice

@garyipip

4 жыл бұрын

Thanks

I agree with Stoney -I have been doing this all wrong and wondering why it looks so crappy. Thanks again

@garyipip

8 жыл бұрын

+John Boyd Thank you!!!

I have an essay due in three hours and I’m watching this.

@garyipip

6 жыл бұрын

Thank you very much!!! How's the essay???

Super! :-)

Woooooooooooow ❤

Parabéns!

Bravo!

Good video thank you garyipip

@garyipip

5 жыл бұрын

Thank you very much!!!

Wonderful job once again. Could you please give me the approx. size (height and width)? Thanks in advance. Roberto from Argentina

subscribed!

@garyipip

8 жыл бұрын

Thank you very much!!!

Hi Gary, thanks for sharing the video. I like to basket weave stamping too. However I am still trying to figure out how to darken the lines so than stamps stand out. Do you have any idea?

@garyipip

8 жыл бұрын

+Francis Lee Thank you!!! For the areas that you want to darken, try apply many coatings of neatsfoot oil with a small brush, carefully like painting... apply as many coatings as you needed, until you are satisfied. The other way is to use dye, but you will have to be very careful about dye, because it can't go back once messed up!!!

nice work. what kind of tread were you using on this project?

@garyipip

8 жыл бұрын

Thank you! The thread is 201D (approx. 2mm thick) waxed polyester…

you are good, friend

@garyipip

9 жыл бұрын

Pedro Crespo Thank you very much!!!

Can’t decide If the first two rows make the number 25 or 52.

+garyipip, Excellent work sir. I like the way you do your videos. Great camera management and lighting as well as concise content and educational. I've been trying to find something to do since forced early retirement due to a disabling accident. Your videos have inspired me to once again try my hand at leatherwork. I've dabbled in this craft in the past but now I have plenty of time to kill. For some reason your key wallet immediately reminds me of my grandfather. It looks like a challenging enough project for me and a great gift for my aging dad. Is the design yours or is the template available online somewhere. I'm sure there are many key wallet designs but this particular one brings back memories. I've subscribed and will try to learn from you. Thank you for taking the time to share your skills with the world.

@garyipip

9 жыл бұрын

Alex Vidal Thank you Alex!!! I am glad you found it helpful!!! I didn't make a pattern for this one, I measured the length and width I need and have the shape cut out in the approximate. I guess if you are going to make one, you may also measure the length of your keys along with the key ring attached to determine the total length you need; and how many keys you are going to have inside for the width. Always leave more space that you need for the snap, I have learnt it the hard way!!! I learn more after each and every time I made something new!!! Happy stitching...!!!

Nice

@garyipip

5 жыл бұрын

Thank you very much!!!

Nice video, what is the rotating ring called?

@garyipip

6 жыл бұрын

Thank you very much!!! I think it actually called brass rotating ring!!! but I am not sure!!!

Nice music choice

@garyipip

6 жыл бұрын

Thank you very much!!!

like your video

@garyipip

9 жыл бұрын

Chun Wai Ho Thank you, I am glad you like it!

You make it look so easy. Once my tools arrive, I will give it a try, but I'm pretty sure it's not that easy. Anyway.....great video. thanks

@garyipip

8 жыл бұрын

+chitimia ciprian Thank you very much!!!

where can we buy your stuff

Tá show 👍

Just received my first leather tool kit and have been working on some leather motorcycle grips to start. I'm curious about the stitching, was it because you had two peices of leather glued together for more strength or was it just for esthetic purposes? Thanks for the tutorial....

@garyipip

5 жыл бұрын

Thank you very much!!! I glued two pieces of leather together simple to make it thicker and stiffer. The thickness of the leather used on this thing was about 1.5mm, if I had a piece with about 3mm thick, I wouldn't have to do that!!!

@bodeine454

5 жыл бұрын

@@garyipip Thanks, if you'd have had a piece of leather the thickness that you wanted would you still have stitched it for looks or would you have left them out?

@garyipip

5 жыл бұрын

Jeff Stone Yes, I would have done the same, cause I think stitching does make it look better!!!

Elegant and simple. Hi , why you put the neatsfoot oil ?

@garyipip

9 жыл бұрын

ksasbr107 Thank you, Neatsfoot oil is a conditioner to the leather, besides, it darkens a little bit!!! Best regards.

@carlosalfonsogutierrez8643

5 жыл бұрын

ksasbr107 hi amazing video! I want to know the numbers of the tre stamps you use ! Thanks you so much

Hi Gary, did you use plain water to damp the leather? Thanks in advance.

@garyipip

7 жыл бұрын

Thanks, yes, that was plain water!!!

@shiennasanjaya6611

7 жыл бұрын

Thanks, Gary!

Could you tell me where you got those stamps and what the sizes were? I'd love to do this on a piece of armor I'm working on.

@garyipip

8 жыл бұрын

+Haylee Neal I got those stamp from a local store in Hong Hong, they sell them in package, around USD25 for 20 pieces with different shape!!!

@HayleeNeal91

8 жыл бұрын

+garyipip thanks :)

Claude Debussy is another great one ! Hey I'm thorough interested in more leather working..can you suggest tools , books or videos ? Besides tandy?

@garyipip

6 жыл бұрын

clair de lune is the best!!! I have a video about tools, and a Q&A vid, please check out my chanel!!! I am sorry that I don't have any suggestion for books because I rarely read books about leather crafting!!! happy stitching!!!

Hi, Where I can buy this tool. Thanks, Konny

@garyipip

8 жыл бұрын

Thanks, I got it from a local hardware store in Hong Kong.

it was a great work. Health in hands and labor. If you have permission, but we have the opportunity to measure.

@garyipip

5 жыл бұрын

Thank you very much!!!

not bad

doing borders is quite hard, I suggest alining the inner curve of the camouflage stamp with the marked line on the border to make it less visible, good work anyway

@garyipip

8 жыл бұрын

+Dany Raven Thank you very much!!!

would you have this template in PDF? I'm starting to work with leather and I would like to start with small jobs !!

Can i know the thickness of veg. Tan leather u use?

@DiversifiedMachinist

6 жыл бұрын

Mohd Razmi The description says two pieces of 1.5mm.

any specific type of that leather?

@seanc3362

5 жыл бұрын

Mohd Saiful Mohd Said veg tan. 5-8 oz

Case (dampen) the leather.

what is the name of the tool you use to set the borders?

@garyipip

6 жыл бұрын

That's a wing divider!!!

super like one of the heart pleasing videos

@garyipip

9 жыл бұрын

Joyscelon D'costa Thank you very much!!!

Are you listening to chopin's nocturnes ???

@garyipip

6 жыл бұрын

Yes, Chopin's nocturnes are my favorites!!!

🖒🖒🖒🖒🖒🖒👏👏👏👏

What’s the name of the stamp?

Is there a pattern for this anywhere?

@garyipip

3 жыл бұрын

I am sorry that I don't have a pattern!!!

Think I'd antique it in mahogany, but not dye just antique.

2525252525252525))))

I see 52 all over

Your maul is too light, each stamp should take one strike. You could've finished that basketweave in 1/3rd the time.

SARA SOUZA Eis má uso há os 0doa de uso Ando me pw dos ale oe0gep For ksl

Your lines are so crooked. D:

@garayworkshop74

5 жыл бұрын

perfection is overrrated

sophomoric at best