putting my HJR 4 mil together right now ! Cant wait for this season
@kappbygreezo18443 жыл бұрын
U make the best content 👌🏾🙏🏾
@josephmccaw78433 жыл бұрын
Man I'd like to have that in my RZ!!!
@jackkrinkov9273
3 жыл бұрын
120 HP might be a bit much for a RZ-350 chassis. But swapping it into an FZR-400 might be the ticket.
@josephmccaw78433 жыл бұрын
Love the rubber mallet lol
@shanebird90162 жыл бұрын
Thanks Kevin!
@joeyholthusen6495 Жыл бұрын
What's the biggest you've seen for a kit on pump gas pushed to the limits? Displacement....banshee...to keep it as a trail Quad, but kind of a sleeper.
@herrjugsracing7816
Жыл бұрын
I just did a 521 on pump gas.
@joeyholthusen6495
Жыл бұрын
@@herrjugsracing7816 thank for the reply. Hp? 80hp? On pump gas attainable for long-term reliability...
@dennisbrooks1863 жыл бұрын
Nice!!! I'm doing an identical build except port work. Same intake. Trans. Different lockout but basically the same. 39mm pwk non air striker quad vent I think their called. Dude said cylinders are drag ported by k&t racing but they look nothing like yours. I think their just mild mild cleanup port. Will port work affect where I should start on jetting? At 200ft where I'll be tuning, and riding no higher then 800 ft for a while.
@herrjugsracing7816
3 жыл бұрын
Porting and altitude does affect jet sizes.
@sethanderson99313 жыл бұрын
Do you think a 521cub could beat a turbo raptor?
@Derkiesmefpipe
2 жыл бұрын
Yessir
@bassparker85943 жыл бұрын
✌🏾💪🏾🤙🏿🤙🏿🤙🏿🤙🏿
@Mohammedbanshee3503 жыл бұрын
🙏🙏🙏👍👍👍👍👍👍👌👌👌👌👌
@gmsdnga2 ай бұрын
No adjustable timing plate or intake crossover?
@herrjugsracing7816
Ай бұрын
No need for the crossover tube but it does have an adjustable timing plate on it. Timing adjustment is always critical for fine tuning.
@julianmercado83543 жыл бұрын
How much will something like that be with labor done ✅
@herrjugsracing7816
3 жыл бұрын
It all depends on options and what it needs. It isn't cheap. When serious toss me an email or text.
@gg-sy4kf3 жыл бұрын
I want to get a 66mm bore on stock cylinders and a drag play port how fast and how much horse y’all think
@sethanderson9931
3 жыл бұрын
Probably 75/80 hp
@NetoBanshee Жыл бұрын
🏁🏁🏁🏁🏁🏁
@68-72mmALKYstyle2 жыл бұрын
Why don’t u port (make bigger) the windows on the pistons??
@herrjugsracing7816
2 жыл бұрын
Only when requested by the customer. I do cut them, but the life goes way down.
@bassparker85943 жыл бұрын
Video of that 521 machine
@herrjugsracing7816
3 жыл бұрын
coming right up.....
@angelalejandro97012 жыл бұрын
How does someone get ahold of you?
@herrjugsracing7816
2 жыл бұрын
herrjugsracing.com
@850bansheegame93 жыл бұрын
Hey how much do you charge to build a motor. Just your labor not parts. I have a 421 Athena 4mil right now, I’m running 50/50 race fuel
Пікірлер: 33
putting my HJR 4 mil together right now ! Cant wait for this season
U make the best content 👌🏾🙏🏾
Man I'd like to have that in my RZ!!!
@jackkrinkov9273
3 жыл бұрын
120 HP might be a bit much for a RZ-350 chassis. But swapping it into an FZR-400 might be the ticket.
Love the rubber mallet lol
Thanks Kevin!
What's the biggest you've seen for a kit on pump gas pushed to the limits? Displacement....banshee...to keep it as a trail Quad, but kind of a sleeper.
@herrjugsracing7816
Жыл бұрын
I just did a 521 on pump gas.
@joeyholthusen6495
Жыл бұрын
@@herrjugsracing7816 thank for the reply. Hp? 80hp? On pump gas attainable for long-term reliability...
Nice!!! I'm doing an identical build except port work. Same intake. Trans. Different lockout but basically the same. 39mm pwk non air striker quad vent I think their called. Dude said cylinders are drag ported by k&t racing but they look nothing like yours. I think their just mild mild cleanup port. Will port work affect where I should start on jetting? At 200ft where I'll be tuning, and riding no higher then 800 ft for a while.
@herrjugsracing7816
3 жыл бұрын
Porting and altitude does affect jet sizes.
Do you think a 521cub could beat a turbo raptor?
@Derkiesmefpipe
2 жыл бұрын
Yessir
✌🏾💪🏾🤙🏿🤙🏿🤙🏿🤙🏿
🙏🙏🙏👍👍👍👍👍👍👌👌👌👌👌
No adjustable timing plate or intake crossover?
@herrjugsracing7816
Ай бұрын
No need for the crossover tube but it does have an adjustable timing plate on it. Timing adjustment is always critical for fine tuning.
How much will something like that be with labor done ✅
@herrjugsracing7816
3 жыл бұрын
It all depends on options and what it needs. It isn't cheap. When serious toss me an email or text.
I want to get a 66mm bore on stock cylinders and a drag play port how fast and how much horse y’all think
@sethanderson9931
3 жыл бұрын
Probably 75/80 hp
🏁🏁🏁🏁🏁🏁
Why don’t u port (make bigger) the windows on the pistons??
@herrjugsracing7816
2 жыл бұрын
Only when requested by the customer. I do cut them, but the life goes way down.
Video of that 521 machine
@herrjugsracing7816
3 жыл бұрын
coming right up.....
How does someone get ahold of you?
@herrjugsracing7816
2 жыл бұрын
herrjugsracing.com
Hey how much do you charge to build a motor. Just your labor not parts. I have a 421 Athena 4mil right now, I’m running 50/50 race fuel
@herrjugsracing7816
3 жыл бұрын
Contact me, its not cheap.
@850bansheegame9
3 жыл бұрын
Ok cool