Showing you the parts it takes to build a 4mil. Cylinders, Billet Basket, Cool Head, ProMod trans, Reed Cages, Modify intakes and tearing it down.
Жүктеу.....
Пікірлер: 19
@rgill450 Жыл бұрын
Another awesome video, I appreciate all the attention to detail.
@_Shane01 Жыл бұрын
Love the vids man I can watch them all day,and very detailed and informative as well,keep it up!!
@timjohnston21912 ай бұрын
Are the Athena cylinders any good? And if there is too much side to side play in the rod Will that knock out the wrist pin bearing there is no up and down play?
@herrjugsracing7816
2 ай бұрын
They work really well if you know how to set them up. I have a video or two on building them.
@timjohnston2191
2 ай бұрын
@@herrjugsracing7816 👍
@davidbrodeur93398 ай бұрын
what is your chinesse cylinder brand you bought thanks
@herrjugsracing7816
8 ай бұрын
They are mine as I finish them up here is house.
@jafeg Жыл бұрын
With this setup would the motor still be able to ride in the woods or yard without super revs.or is it a more upper mid to topend powercurve?
@peterk5460
Жыл бұрын
Compared to stock: way more bottom end
@herrjugsracing7816
Жыл бұрын
Way more power everywhere. Great rider build.
@jadonanderson8080 Жыл бұрын
Will a R6 clutch work on a Yamaha banshee
@peterk5460
Жыл бұрын
I believe R1 clutches work with the banshee
@herrjugsracing7816
Жыл бұрын
Great question but one that I do not know. What year R6 would that be from. We use to run the YFZ1000 way back but they do not cross any longer.
@Slimreaper93 Жыл бұрын
22cc domes good for pump gas?
@herrjugsracing7816
Жыл бұрын
Yes, for stock stroke stock rod setups.
@Slimreaper93
Жыл бұрын
@@herrjugsracing7816 I have a 4mil long 115mm long rod I’m building. Can I run 4mil 22cc cut domes with 93 octane?
@buddymullins64246 ай бұрын
How do I get my motor to you. I would love for you to build me one. I can send my number if your interested. Please let me know I’m looking for someone soon as possible thanks
Пікірлер: 19
Another awesome video, I appreciate all the attention to detail.
Love the vids man I can watch them all day,and very detailed and informative as well,keep it up!!
Are the Athena cylinders any good? And if there is too much side to side play in the rod Will that knock out the wrist pin bearing there is no up and down play?
@herrjugsracing7816
2 ай бұрын
They work really well if you know how to set them up. I have a video or two on building them.
@timjohnston2191
2 ай бұрын
@@herrjugsracing7816 👍
what is your chinesse cylinder brand you bought thanks
@herrjugsracing7816
8 ай бұрын
They are mine as I finish them up here is house.
With this setup would the motor still be able to ride in the woods or yard without super revs.or is it a more upper mid to topend powercurve?
@peterk5460
Жыл бұрын
Compared to stock: way more bottom end
@herrjugsracing7816
Жыл бұрын
Way more power everywhere. Great rider build.
Will a R6 clutch work on a Yamaha banshee
@peterk5460
Жыл бұрын
I believe R1 clutches work with the banshee
@herrjugsracing7816
Жыл бұрын
Great question but one that I do not know. What year R6 would that be from. We use to run the YFZ1000 way back but they do not cross any longer.
22cc domes good for pump gas?
@herrjugsracing7816
Жыл бұрын
Yes, for stock stroke stock rod setups.
@Slimreaper93
Жыл бұрын
@@herrjugsracing7816 I have a 4mil long 115mm long rod I’m building. Can I run 4mil 22cc cut domes with 93 octane?
How do I get my motor to you. I would love for you to build me one. I can send my number if your interested. Please let me know I’m looking for someone soon as possible thanks
@herrjugsracing7816
6 ай бұрын
herrjugsracing.com
@buddymullins6424
6 ай бұрын
Thank you kindly.