Beautiful. I'm glad to see someone giving another old car the star treatment. It's going to be a good time riding around in this living room on wheels.
@paulcasarez40419 күн бұрын
Here in Glendale Arizona that paint would have dried in 3 minutes at the high temperature of 117 degrees for us the next ten days we will be from 113 to 117 or higher
@jginnovationgaragellc23 күн бұрын
Best way to do it IMO , I do this a well
@freddysoto702118 күн бұрын
DAM, HOMIE 🎉 have a great n safe 4
@timc393721 күн бұрын
Be on the lookout for Bird Strafing Runs >.
@stranglehold99918 күн бұрын
How soon is too soon? Just wait 24hrs?
@b00sted_SS22 күн бұрын
How many days do you bake it in the sun before you cut and buff it?
@michaelbyrnes794423 күн бұрын
Leave it a good week in the sun before cutting and buffing
@negativeindustrial
22 күн бұрын
I left my freshly painted MKII MR2 Turbo for an entire year in the hot Texas sun. I’ve only ever wiped it down, it’s never even been washed. I wonder if that was a bad idea? It looks great but definitely needs a proper cut and buff.
@michaelbyrnes7944
22 күн бұрын
@@negativeindustrial most 2k paint’s have a life of 7 years in use and I always put two extra coats of clear on and sometimes after a week of outside I’ll ultra fine wet rub the whole car down again and re clear it one more time aka flow coat the time you’ve left it out in heat is perfect in my opinion no sink back and if there’s any paint issues underneath the primer or with the base coat or clear in that time you’re good to cut n buff or flow coat lovely
@negativeindustrial
22 күн бұрын
@@michaelbyrnes7944 Thanks for the detailed reply. I’ll definitely get it finished in fall once it cools down a bit.
@diamonddetails944521 күн бұрын
I used to think that was a myth, since I was born... NOT ANYMORE 😮
@tonykerr814722 күн бұрын
I've been using the Sun for years. When I'm doing mud work a lot of it when I'm close before I prime I put that out in the sun for a day prime the mud work before I put it out in the sun for a day I will sand primer a little and put it in the sun. you talk about stuff shrinking
@adamkleinschmidt304122 күн бұрын
If you wanted to paint a car and have the best finish possible, be maintained off the gun. What's done differently? Different clear? Just less coats? Something else?
Пікірлер: 17
Beautiful. I'm glad to see someone giving another old car the star treatment. It's going to be a good time riding around in this living room on wheels.
Here in Glendale Arizona that paint would have dried in 3 minutes at the high temperature of 117 degrees for us the next ten days we will be from 113 to 117 or higher
Best way to do it IMO , I do this a well
DAM, HOMIE 🎉 have a great n safe 4
Be on the lookout for Bird Strafing Runs >.
How soon is too soon? Just wait 24hrs?
How many days do you bake it in the sun before you cut and buff it?
Leave it a good week in the sun before cutting and buffing
@negativeindustrial
22 күн бұрын
I left my freshly painted MKII MR2 Turbo for an entire year in the hot Texas sun. I’ve only ever wiped it down, it’s never even been washed. I wonder if that was a bad idea? It looks great but definitely needs a proper cut and buff.
@michaelbyrnes7944
22 күн бұрын
@@negativeindustrial most 2k paint’s have a life of 7 years in use and I always put two extra coats of clear on and sometimes after a week of outside I’ll ultra fine wet rub the whole car down again and re clear it one more time aka flow coat the time you’ve left it out in heat is perfect in my opinion no sink back and if there’s any paint issues underneath the primer or with the base coat or clear in that time you’re good to cut n buff or flow coat lovely
@negativeindustrial
22 күн бұрын
@@michaelbyrnes7944 Thanks for the detailed reply. I’ll definitely get it finished in fall once it cools down a bit.
I used to think that was a myth, since I was born... NOT ANYMORE 😮
I've been using the Sun for years. When I'm doing mud work a lot of it when I'm close before I prime I put that out in the sun for a day prime the mud work before I put it out in the sun for a day I will sand primer a little and put it in the sun. you talk about stuff shrinking
If you wanted to paint a car and have the best finish possible, be maintained off the gun. What's done differently? Different clear? Just less coats? Something else?
@blip5823
22 күн бұрын
its a secret
@adamkleinschmidt3041
20 күн бұрын
@@blip5823 spill it lol
It’s called a god bake