BAD INFLUENCE Rock Bouncer Build by Busted Knuckle Off Road
Автокөліктер мен көлік құралдары
When Matt Schuessler came to us with a Rock Bouncer Build in mind we knew we had to go all out. Since he is no stranger to the Southern Rock Racing Series Podium we knew Jake Burkey and our team was going to have to pull off some top notch fabrication. We started with our Jake Burkey Riot Buggy Race Chassis and quickly built two Steering Dana 80 axles to go underneath it. Then the mother of all LS engines arrived. We stuffed a 454 LSX Supercharged engine capable of over 1400 Horsepower under the engine cage backed by a powerglide transmission and SCS straight drive case. This will allow him to be competitive with his brother in law who owns and drives the Gold Rush Rock Bouncer. After all that we did some slick custom interior work that is sure to turn heads at the next rock racing event. This might be the baddest Busted Knuckle Rock bouncer to ever roll out of our shop. Stay tuned because on the next episode we will be putting it back together after powder coating and then it's DYNO DAY!
#BadInfluence #RockBouncerBuild #BKORbuilt
Official Busted Knuckle Merch - www.bustedknucklegear.com
BKF Facebook - / bustedknucklefilms
INSTAGRAM / bustedknucklefilms
SNAPCHAT- / bustedknucklefilms
Big Thanks to our sponsors
www.bustedknuckleoffroad.com
Пікірлер: 255
Gold Rush is an absolute beast so with “mad-man Matt Schuessler” and his heavy foot this should be awesome.
@BustedKnuckleVideo
4 жыл бұрын
We can't wait to see him race it.
So friggin cool, Jake does a great job of explaining his builds. Christians buggy is a killer. Can't wait to see this bad boy rip the hill's ass a new one.
@BustedKnuckleVideo
4 жыл бұрын
This one should be very competitive.
These are by far your best videos please focus more on these videos!!!!! I hope new attitude has the same headers the old buggy had!
@BustedKnuckleVideo
4 жыл бұрын
We plan on doing these videos for every turnkey build that we do and they will continue to evolve and get better. Thanks for the props!
@BustedKnuckleVideo
4 жыл бұрын
And no 180s on this one, there just wasn't room.
@MrMrsregor
4 жыл бұрын
@@BustedKnuckleVideo it is awesome the way you explain the important key information about how and/or why you make a decision in the design. and how you explain the importance of the order of the build.. i would love to build some these buggies and hope to some day soon. keep up the fantastic entertainment and education, thanks!
@BustedKnuckleVideo
4 жыл бұрын
Thanks! Next up is a trail rig.
@Geekmasterproduction
4 жыл бұрын
Agree man, I love these build videos.
You guys do incredible builds
@BustedKnuckleVideo
2 жыл бұрын
Thanks!
Eu adoro ver toda esta imagens da construção destes carros maravilhosos que vocês constrói. Parabéns pra vocês.
Absolutely beautiful
@BustedKnuckleVideo
3 жыл бұрын
Thank you! 😊
Missing you out having fun in a buggy love these builds keep up the great job
@BustedKnuckleVideo
4 жыл бұрын
we will be back in one soon
@justaguy9776
4 жыл бұрын
Totally agree, gold rush, the Italian job, this buggy. Amazing builds, but Jake is a crazy driver. Seems everybody had to bring there A-game to stay competitive!
super nice work, Matt is an all out racer and it's going to be entertaining can't wait, competition is heating up big time!
@BustedKnuckleVideo
4 жыл бұрын
We can't wait to see what he thinks of it!
very nice
@BustedKnuckleVideo
3 жыл бұрын
It turned out killer
Absolutely outstanding. Top on KZread 👍👍
@BustedKnuckleVideo
4 жыл бұрын
Thanks Jeff!
very nice job!!!
@BustedKnuckleVideo
4 жыл бұрын
Thank you!
Absolutely awesome.
@BustedKnuckleVideo
4 жыл бұрын
Work of Art
@rikkisarver7179
3 жыл бұрын
What type of tubing bender do you use?
Wow that is some serious axle!
@BustedKnuckleVideo
4 жыл бұрын
Pure Beef
That is so sick looking and this is the first time I am see what it takes to make one
@BustedKnuckleVideo
4 жыл бұрын
Austin Bob we did one on gold Rush as well.
Very nice buggy bro ilike that buggy by the way new subscriber here from philippines 🇵🇭 bro.
@BustedKnuckleVideo
3 жыл бұрын
Thanks for the sub!
@repuyamixvlog9043
3 жыл бұрын
Welcome brother hope some day i have mu own buggy this my dream brother
That's one impressive build . I can't wait until your next video . Matt is going to be tearing it up with this one . I'm going to miss the sound of those 180 degree headers though . Until next time take care .
@BustedKnuckleVideo
4 жыл бұрын
We wanted them to be on there too but it just did not make sense for this race build.
great job nice machine
@BustedKnuckleVideo
2 жыл бұрын
Thanks!
Hell Yea Nice work..
@BustedKnuckleVideo
4 жыл бұрын
We are super happy with how this one turned out
I had a 789 stroker buggy with a dual cam bypassed carb ,a dual injection synthetic clutch ,I had it double bypassed with flowmatic extra duty cherry bomb exhaust ,man that thing could break you're dam neck
@BustedKnuckleVideo
2 жыл бұрын
sounds impressive LMAO
Badass build!!! And awesome dog 🐕!! I also have a Blue Heeler!!
@BustedKnuckleVideo
4 жыл бұрын
Sadly she was hit by a truck not long after this video was shot, she was an awesome dog.
@superchargedadventures
4 жыл бұрын
@@BustedKnuckleVideo It's very sad to hear that. Sorry for your loss!
@BustedKnuckleVideo
4 жыл бұрын
Thank you.
@CasperRc81
4 жыл бұрын
BustedKnuckleVideo I’m sorry for your loss. I also have one what such caring dogs they are. Truest dog to their owners I’ve ever seen. Great fab work wow!
Amazing
@BustedKnuckleVideo
2 жыл бұрын
Thanks
nice looking horse pressure
@BustedKnuckleVideo
4 жыл бұрын
all them horsepressures
Nice hat!!
@BustedKnuckleVideo
4 жыл бұрын
We sell them at www.BustedKnuckleGear.com
.....when toughts and dreams come true😍
@BustedKnuckleVideo
4 жыл бұрын
Full finished vid with dyno and shock tuning action should be out tomorrow so stay tuned
@sebaseba346
4 жыл бұрын
@@BustedKnuckleVideo 😍😍😍😍😍😍😍😍😍😍😍😍😍👍
@BustedKnuckleVideo
4 жыл бұрын
kzread.info/dash/bejne/iHWryJqlmtq8k5M.html
I love your videos
@BustedKnuckleVideo
4 жыл бұрын
Thanks!
Nice
@BustedKnuckleVideo
4 жыл бұрын
Thanks!
@imambukhori2222
4 жыл бұрын
Mahal ya habisnya kayak gtu itu
So wanted to build a buggy frame like this for a while but in the configuration of a flatbed so one could carry some stuff with into the trails.
@BustedKnuckleVideo
3 жыл бұрын
our ride chassis has a slight bed in the back to carry tools and a cooler
Thanks
@BustedKnuckleVideo
4 жыл бұрын
No problem
That motor coast more than my intire jeep build truck and all its nasty im happy for u
@BustedKnuckleVideo
4 жыл бұрын
That's racing
more strong 💪
@BustedKnuckleVideo
4 жыл бұрын
just wait until you see the dyno pulls
@hakanbasl4766
4 жыл бұрын
@@BustedKnuckleVideo I can not wait
@BustedKnuckleVideo
4 жыл бұрын
Should have that video up soon as well
@hakanbasl4766
4 жыл бұрын
@@BustedKnuckleVideo 🙏🙏
We need the dyno and shock tuning vids please, hanging to hear this thing
@BustedKnuckleVideo
4 жыл бұрын
Hoping to premiere the video later today!
So when Jake does the pinion angle and points it at the transfer case, does he get within and angle of 2 degrees with an angle finder? Reason I ask is b/c my tacoma has a 3 inch lift with some serious drive shaft vibration. Figured if i shimmed the rear axle 2 or 3 degrees that would take care of it, but not sure.
@BustedKnuckleVideo
4 жыл бұрын
he gets it pretty dang close
Big like yehhhhhh
@BustedKnuckleVideo
3 жыл бұрын
👊🔧
Great video! What controls are you using for your rear steer? I need an electric over hydro setup. This manual "log splitter" type valve I have sucks.
@bustedknuckleoffroadllc5060
4 жыл бұрын
This is what we use. Works flawlessly bustedknuckleoffroad.com/Electric-Rear-Steer-Kits_c477.htm
@BustedKnuckleVideo
4 жыл бұрын
These are the best rear steer systems period.
@big88jeep
4 жыл бұрын
BustedKnuckleVideo Thanks for the reply guys!
@BustedKnuckleVideo
4 жыл бұрын
always
Perryville, MO boys are making a statement!
@BustedKnuckleVideo
4 жыл бұрын
They've got some of the baddest buggies on the planet
@ryanschemel94
4 жыл бұрын
They have to be to try and beat that Hellbent buggy out the top.
@BustedKnuckleVideo
4 жыл бұрын
his time is coming. Stay tuned!
@ryanschemel94
4 жыл бұрын
I been watching the TC buggies along time and his driving style sounded identical to the test run on Matt driving bad influence up the test run hill. I will bet if he keeps that kinding of driving up no doubt in my mind Schuessler will be top 3 week after week. This guy has what it takes to place. I guarantee it. Runs like that is what keeps me coming back to watch this sport.
@ryanschemel94
4 жыл бұрын
Pinned for the win. Worry about what you broke later 👍
Hello, I was just curious, aside from full builds do you guys ever do major repairs after crashes? That would make for an awesome video as well, to see some Rockbouncer (surgery).
@BustedKnuckleVideo
3 жыл бұрын
We do maintenance and repair work on the race rigs that we have built. This one has broken a few parts that we have never seen break before. Most recently he twisted the splines on an SCS gear box.
Awesome build, The front of my buggy is around 14% heavier than rear. What's the magic formula good buddy?
@BustedKnuckleVideo
4 жыл бұрын
50/50
I would love one for on and off road.
@BustedKnuckleVideo
3 жыл бұрын
we are working at making them more affordable
What grade of steel do you use for the chassis? Do you use chromoly or just mild steel?
@BustedKnuckleVideo
4 жыл бұрын
DOM steel
Are you guys using a mud racing series fti power glide in this build? or is it cusom?
@BustedKnuckleVideo
4 жыл бұрын
It's custom
These guys should make a koh build
@BustedKnuckleVideo
4 жыл бұрын
If we get the right client we would be happy to build a KOH car.
454. Power
@BustedKnuckleVideo
2 жыл бұрын
LSX454
How do the chassis usually cost? Like straight out the door?
@BustedKnuckleVideo
3 жыл бұрын
around 5500 depending on what all you want included
What's the smallest motor in bouncer that's still competitive I'm looking at a bouncer found a good deal but it just has a built 5.3
@BustedKnuckleVideo
4 жыл бұрын
to be competitive you'll need atleast a 408 stroker and some dialed in suspension
Waiting Patiently.. Note to self.....Get Rich and Buy These Rides!
@BustedKnuckleVideo
4 жыл бұрын
what are you waiting on? this buggy is finished- kzread.info/dash/bejne/iHWryJqlmtq8k5M.html
This. This is great KZread content! I'm watching your 'Project Mall Crawler' video, but which of your "non-buggy" videos would you recommend I watch? (I'll get to them all, just curious which is your favorites.) Have you ever done (or would you do) a street-legal budget build? Again, great content.
@BustedKnuckleVideo
4 жыл бұрын
WE are looking into doing a Jeep Grand Cherokee build for fun, check out our Bronco Prerunner Project as well.
@travislarson5192
4 жыл бұрын
That is a great platform. Not that you asked, but I would love to see a Suzuki Samurai build from you guys. I’d be curious of your approach and where you’d focus to get the most “bang-for-your-buck” on these little rigs. Would you focus on power or tire/suspension? Just random thoughts! I clicked that little, what do you call it... “bell”!?! Can’t wait to see more. Thanks!
@BustedKnuckleVideo
4 жыл бұрын
A Samurai would be a fun build.
@MrMrsregor
4 жыл бұрын
@@BustedKnuckleVideo a jeep grand cherokee build would be awesome ! (this is comming from a xj/tj owner) i just dont see as many really good grand cherokee builds around
@BustedKnuckleVideo
4 жыл бұрын
I think a XJ vs ZJ build off would be fun
Ooo if i could aford to build one i would some day im a iron worker and quit drinking cant build toys for few years but some day ill be ahead and can build one ive got some sick toys i built few years ago but now im building stuff like flatbed trucks and by dayly car needs repower
@BustedKnuckleVideo
4 жыл бұрын
they are fun but a lot of work
Is there any particularly and specific reason ,why the engine bay is front or side the body ( most of em ) and not in the rear dude?
@BustedKnuckleVideo
2 жыл бұрын
hill climbing seems to be better with a front engine
What pipe diameter is recommended, and can I use 6013 welding?
@BustedKnuckleVideo
4 жыл бұрын
1.75
In good way
@BustedKnuckleVideo
4 жыл бұрын
For sure
Is the Riot chassis the same as the Goldrush rig?
@BustedKnuckleVideo
3 жыл бұрын
It is
Taped up so it doesn’t get scratched lol how does it look after the first run!!
@BustedKnuckleVideo
4 жыл бұрын
It has to look show quality for it's photo and video shoot. Stay Tuned.
@duffman1241
4 жыл бұрын
BustedKnuckleVideo 🤘🏻👍
@BustedKnuckleVideo
4 жыл бұрын
bit.ly/BadInfluenceBKOR
how long are your front links and what is the wheelbase?
@BustedKnuckleVideo
2 жыл бұрын
125" wheelbase
What would a buggy cost for someone new to the sport? Like a cheaper build with just a 500 600 hp motor that can take a beating but not the most expensive parts ever. Would be more of a hobby then trying to win money but i would still want to compete every so often.
@BustedKnuckleVideo
4 жыл бұрын
For us to build one they would start around $100k
What length coilovers are on bad influence?
@BustedKnuckleVideo
4 жыл бұрын
Zach Mosteller 16
@zachmosteller4681
4 жыл бұрын
@@BustedKnuckleVideo ok thank you
@BustedKnuckleVideo
4 жыл бұрын
anytime
Q moto vcs usam
Where do you put turn signals? I'd just have to take this down the street
Sweet but bring all of us som build content PLEASE❗
@BustedKnuckleVideo
4 жыл бұрын
More build content on the way!
@lindsayk41
4 жыл бұрын
@@BustedKnuckleVideo Thanks guys wish i could work for your shop
@BustedKnuckleVideo
4 жыл бұрын
we are always on the hunt for skilled fabricators
Are we ever gonna to see the riot buggy getting nasty again?
@BustedKnuckleVideo
4 жыл бұрын
The Riot buggy was Sold, Jake want's to build a trail bouncer next and get back to riding
What's the final curb weight for this buggy?
@BustedKnuckleVideo
2 жыл бұрын
around 4400 lbs
I want to do this stuff so bad. How does one get started??
@BustedKnuckleVideo
4 жыл бұрын
start with a pile of tubing
Where do the ac/heater vents go?
@BustedKnuckleVideo
3 жыл бұрын
why would you need AC or heat in one of these? You could do heated seats I guess
Me puedes mandar el presio del chasis nada más gracias
Brasil
@BustedKnuckleVideo
4 жыл бұрын
We can ship.
@marcoshenrique5301
4 жыл бұрын
Without money:(
@BustedKnuckleVideo
4 жыл бұрын
that's no bueno
@marcoshenrique5301
4 жыл бұрын
BustedKnuckleVideo brasil não e facil tivesse dinheiro ia ai ver as provas meu sonho portugues usa tradutor
What is the cost of an engine and transmission like that???
@BustedKnuckleVideo
4 жыл бұрын
20-30k
sounds a little like he's using a flat crankshaft , Is it?
@BustedKnuckleVideo
4 жыл бұрын
nope
Hi bro... what engine are you using?
@BustedKnuckleVideo
Жыл бұрын
machine?
@asrukoff
Жыл бұрын
@@BustedKnuckleVideoyes engine...
@BustedKnuckleVideo
Жыл бұрын
this one has a supercharged LSX454
@asrukoff
Жыл бұрын
ok thanks bro...
@asrukoff
Жыл бұрын
This is has a supercarged this Yang ini memiliki supercarged
i wish to work with you guys.
@BustedKnuckleVideo
4 жыл бұрын
we are always hiring
tell me where you can buy a Rock Bouncer drawing???
@BustedKnuckleVideo
4 жыл бұрын
no one sells drawings but you can buy a chassis from www.bustedknuckleoffroad.com
Have you guys ever thought about following Clayton Hollingsworths design.....
@BustedKnuckleVideo
4 жыл бұрын
It worked in some situations but not all, Solid axle rigs continue to dominate the sport so why change?
@porthos6914
4 жыл бұрын
Probably the question wondered by a lot of us that watch. I think Clayton is just that good of a driver honestly. He came on the scene and seemed like the ultimate competitor for ole Timmy! Wes keen has a really low center of gravity buggy too, without IS suspension, but again he is an awesome driver!
@BustedKnuckleVideo
4 жыл бұрын
Clayton could drive no doubt, there is another independent suspension buggy in the works that is fully CAD designed and might change the sport, we shall see.
How much do these things cost to build?
@BustedKnuckleVideo
3 ай бұрын
100k plus
How much does it cost to have a buggy built for some one
@BustedKnuckleVideo
4 жыл бұрын
They start at 85k turnkey out the door base model
@chrisdevore9912
4 жыл бұрын
@@BustedKnuckleVideo wow did not know they cost that much oh well it would been fun to try one tho thnx
badd to the bone
@BustedKnuckleVideo
4 жыл бұрын
ITs a Beast
What's the total cost of building this from scratch?
@BustedKnuckleVideo
4 жыл бұрын
$100k plus
Will I out do the attitude buggy? I don't think so says a bias person
@BustedKnuckleVideo
4 жыл бұрын
I don't think the attitude buggy is anywhere close to this one
What tires are those
@BustedKnuckleVideo
4 жыл бұрын
43 SX stickies Cut
How much for that beast got to be about 150 000
@BustedKnuckleVideo
4 жыл бұрын
That's pretty close
@michaelbiel7473
4 жыл бұрын
@@BustedKnuckleVideo it's sick as hell can't wait to see the rest of the build its going to be a screamer
@BustedKnuckleVideo
4 жыл бұрын
The color combo he chose makes it look amazing
@jimfryar1
4 жыл бұрын
BustedKnuckleVideo 😳😳
@davidwilliams-xc6kt
4 жыл бұрын
250k is my guess
You powder coated it the night before delivery? Lol
@exzackt
4 жыл бұрын
All jokes, love the content man I wish y’all the best.
@BustedKnuckleVideo
4 жыл бұрын
The week before delivery.
इस कार की प्राइस कितनी है और कहां पर उपलब्ध है
@BustedKnuckleVideo
4 жыл бұрын
They start at $85,000 USD and can be purchased from www.BustedKnuckleOffRoad.com
No lie I would take a Jake Berkey built buggy over a TC buggy no joke I've watched him build several of these and I don't think there's a better built one in the world!
@BustedKnuckleVideo
4 жыл бұрын
Thanks Rusty. The level of detail on these is unlike anything else I've ever seen.
How Much $$$ and time are we talking to duplicate this build?
@BustedKnuckleVideo
4 жыл бұрын
Over 100k
Wat is the wege lv (poid en fr)
Is he selling attitude?
@BustedKnuckleVideo
4 жыл бұрын
I would assume so.
No 180”s???..... I want my $ back!!
@BustedKnuckleVideo
4 жыл бұрын
No performance gain, they were only going to cause problems.
@jimfryar1
4 жыл бұрын
BustedKnuckleVideo yea... but...but... but... DAT SOUND!!!
@BustedKnuckleVideo
4 жыл бұрын
sound wasn't worth sacrificing heat soak and packaging issues
LSX means 454 so you keep saying 454 454. Let's put this 454 454 in now lol
@BustedKnuckleVideo
3 жыл бұрын
Does it though?
What you thank 20 pounds of BOOST???
@BustedKnuckleVideo
4 жыл бұрын
14 pounds of boost
@jaywalker2213
4 жыл бұрын
Wooo 14 its still beast mode .. gonna be big hp numbers . Can't wait.👍
@BustedKnuckleVideo
4 жыл бұрын
it has decent dyno numbers, It's no Gold Rush but it is very driveable
The points of this video that you try and talk all cool makes me want to yak I much prefer when you speak direct and plainly
@BustedKnuckleVideo
4 жыл бұрын
not sure what you mean
It's hard to believe that people "build"(or whatever it is you do to your mom's Nissan to make it better for burnouts) drift cars...sad really.
@BustedKnuckleVideo
4 жыл бұрын
I have respect and appreciation for anyone that wants to modify their vehicles to fit what they like to do.
Sorry, more car less face time, reminds me of Overhaulin' all faces with a car background. Constrictive criticism gives this one a big thumbs down...... love your videos Matt just not this one.
@BustedKnuckleVideo
4 жыл бұрын
to each their own, can't make everyone happy so I just make videos that I like.
music sucks
@BustedKnuckleVideo
4 жыл бұрын
I know you really wanted backstreet boys but this is the music most of our fans prefer 😉
What are you guys slave owners........ feed them better.
@BustedKnuckleVideo
4 жыл бұрын
feed who better?
@daviddelker1111
4 жыл бұрын
It was a joke about your hungry helpers.