Bad Engine Mount - Diagnose and Repair
Come along with Eric O. as he shows you the process of diagnosing and repairing a bad motor mount. In this video he shows the repair on a 2006 Buick Lucerne with the 3.8 engine.
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : astore.amazon.c...
If an SMA Video has helped you out please consider giving using the "support" link on our KZread home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
Пікірлер: 439
Hey Eric O. As usual awesome video. I'm a Certified GM technician and deal with these vehicle all the time almost 90 percent of the Lucernes that come through here have destroyed front mounts. I usually take the tripod and lift the engine high enough to clear the and time saved lol. I love all of your videos and keep up the excellent work bud. Oh a remember TORQUE IT TO SPEC
@mericafreedomland3583
5 жыл бұрын
cvmiata super common on those the impalas with the 3900, buick lucernes..... Also a GM cert tech my self
" Lifts go up, lifts go down" that''s a classic SMA line. Have a happy and safe thanks giving, and than you for all the videos.
Eric, I just received my Astro Onyx 1822 Nano 1/2" impact a couple days ago and I just love that thing! I used it for the first job yesterday replacing the stock upper camber arms with new adjustable camber arms on a 93 300ZX Convertible and it was small enough to get in there and I did not have to use a manual ratchet at all. It made the job so easy. The IR 231c would never have fit in all those places to get all the nuts and bolts. Your channel is awesome and I have learned a lot but the exposure to your great taste in tools is putting a strain on my tool budget as I am spending a lot more on tools now. Oh well, who ever dies with the most tools wins. I am gonna pick up the Astro 1128 3/8 mini air ratchet next week. Keep up the great work. I have watched all your videos twice.
@SouthMainAuto
7 жыл бұрын
Astro is a great company I have found out. If you have any problems just call them. great people right in CA
@BigDog50001
7 жыл бұрын
South Main Auto Repair My Astro 40SL light just started randomly flickering when I use it now. I hope they take care of it.
@SouthMainAuto
7 жыл бұрын
call them
Love your videos. I’m active duty stationed in Hawaii and bought a island beater to get around. I have several things that need to be done to it and this is one of them. Keep them coming.
Nice video. simple to the point and requires no pricey diagnostic equipment. This is the perfect DIY'ers repair. Good job Eric. -John
@SouthMainAuto
7 жыл бұрын
Come on I have more money wrapped up in my diagnostic brain than I do in a tool John! Haha jk'in Thanks man and have a happy Turkey day!
Nice video Eric. I even enjoyed your interruption from the office. Makes it more "life-like...real". Looking forward to more of you sharing your expertise. Thanks.
@jwingo7257
4 жыл бұрын
Dave denton You seem like a really regular, easy going guy. Enjoyed the video especially the “reach around ratchet”! Cool dog, nice real life interrupt by I’m assuming your wife.
You have my ratchet! I've owned it 16 years now. The thing broke right out of the gate, so it sat in my toolbox for almost 10 years before I finally remembered to bring it to work one day and have the Snap-On guy replace it. It's been used almost daily for the past 6 years, and never misses a beat. :) I had a bad motor mount in my '72 El Camino for years. Every time I'd leave from a stop, about 1,000 feet up the road, I'd get a big THUD as the engine came back down on the mount (when I finally let up on the pedal, lol). It had completely separated from the engine. Probably put 40k miles on it like that, and only fixed it for the guy who bought it. :D Oh, and HAPPY THANKSGIVING to you and the family! CHEERS
@SouthMainAuto
7 жыл бұрын
Lol cool story man! Happy thanksgiving to you too!
I had a 68 Fairlane for two years in high school (84-85), and for nearly all the time I had it there was one broken motor mount. Every time I'd put it in gear and put my foot to the floor, the engine would twist and crimp the throttle linkage. As you can imagine, the car would have a mind of its own at that point and the only option to free the linkage was to shut off ignition. My friends got a real kick out of it. Incidentally, those were some tough motor mounts on the Fairlane considering how much abuse it took with a broken one.
Just had mine replaced yesterday. I replaced all the front suspension parts including the engine mounts on my S10. It looked so easy on this car,,, On my truck it was a job I wouldn't wish on my worst enemy.
@RaoulThomas007
6 жыл бұрын
chungaleta1234 Is your S10 4WD? They are a B___h!
I had all 4 mounts replaced in my van, like a mth ago , and all was good, then a week ago , I started getting that Clunk when I put it in drive . Just like before, I have heard they can go bad real quick if they are cheap ones , or if they are not alighned right ,
Good to see videos again. I imagine you have been quite busy with people trying to get their cars ready for winter. I know I have been.
Love your video, very understanding instructions. And love your personal life you include in your videos. Please dont stop. I learn a lot from you thanks George Rivera. Texas.
I tested mounts on 07 impala. As soon as it was put in drive, the engine moved/torqued A LOT. Did not even have to press the gas to see it was moving way too much. Symptom was vibration going down the road especially at certain speeds, 51 mph in this case. Already had tires rotated and balanced and did not fix. There are six mounts in a kit for impala. Some for motor, others for transmission. Thanks for posting.
Thank you Eric! Even though this was filmed in 2016, this is good solid information for 2021 ! Never knew this could happen to an engine bracket. Loved the close-ups and step by step...good video!
I wish you were here in Illinois - need someone here to trust like you to work on my car.
As Vanessa says , "The People need to Know" Have a good Thanks given, Eric and Family. I Know you will.. I Like How Vanessa looks out for us :), We The People Thank Her.
@SouthMainAuto
7 жыл бұрын
I will give her word and let her know that the people have spoke
@craighumphris5171
6 жыл бұрын
Charles Miller Giday mate. Ok, I got in early for this years RCN. Booked into Daly River Pub Monday 27th Aug, Wauchope Pub Tuesday 28th. Still,gives me time for a quick dip at Mataranka. If your keen, still rooms available.
@lisacabedo4373
6 жыл бұрын
Charles Miller how to change passenger front engine mount Chevy Aveo
wish you made more videos everyday....only thing I look forward too everytime!
@Kidsbabyplay
3 жыл бұрын
⁹ppp
Short and sweet! I smash the like button before I even watch the videos! Seems like the most efficient thing to do.
so glad to be back , I've been having SMA withdraws . been on vacation down in the San Antonio visiting my family
Excellent informative video, as are all of yours I've viewed. Your camera work and audio are always top notch. Thanks for your efforts to inform us shade tree mechanics.
great job diagnosis
I felt a force of energy pulling my thumb to click on "subscribe"!
Mounts are a favorite of mine. Some can be a bit of a pain but since you can feel the difference when you’re done
You should have seen my 94 Taurus. You didn't have to guess. You could watch it clunk around in the engine compartment like a rock rolling around in there. Ford in their genius decided to give it a rubber mount filled with hydraulic fluid, which rotted away the rubber containing it. Was totally gone. When I saw it (while examining something else) I was like, so THAT'S why I have an exhaust leak. Engine was ripping the exhaust up!
@inhaleanthrax1333
6 жыл бұрын
David McClelland im having problems with my 2005 all tbe mounts are broken and all the hoses keep falling off because of it .. Never get a ex cop car
@davestout8471
6 жыл бұрын
The engine mount bolts upfront on those ford Taurus are known to back out completely. Guess how I figured that out.
brings to mind a friends 59 catalina; if he accelerated to hard the throttle/pedal went to the floor until the trans shifted. a fun experience. with my 17 year old enthusiasm i decided to put my hand under the linkage so i could stop the throttle from "flooring".. well, i STILL remember that experience! and the PAIN across my 4 fingers!
Thanks for posting
VERY GOOD VEDIO. EXPLAINED PROCEDURE VERY WELL. THANK YOU.
Another awesome video from eric, happy thanksgiving to you and to your family....
Ahh memories. Reminds me of my 97 & 98 dodge neons. Factory front motor mount was made of bubble gum. The fix was to swap out to the ACR unit. The rubber in them was hard as a rock. No vibration isolation at idle, BUT THEY DIDNT BREAK.
Thank you for posting this video.
Good job
My son had a Neon. Don’t remember the year. Brought it in to the tire center to replace the motor mounts. They bought some cheap Chinese ones to put in and they both went bad. Had them replaced under their warranty. Car still made an odd noise. Looked up the appropriate video for the motor mounts and found there was a third mount under the battery box. I changed that one. Car still made an odd noise upon acceleration but otherwise ran fine.
another great video Eric and have a great thanksgiving to you and your family
thanks for the info at the end i believe i am having the lean problem on my 2011 wk2 due to clunk noise as well i applied what u said about thr motor mount and ur right the motor mount was shot thanks again brother
I had a bad mount on my engine. It actually fell apart when i was removing it. Like the top mounting plate was in the engine still while i was holding the rubber in my hand
Yeah favorite repair on a 87 eurosport sport sedan 2.5 liter had to change all 3 and the dogbone, same with the 92 pontiac lemans two door coup with a 2.2liter
Beautiful, getting ready to do this now.
good work thanks nice to watch
Thank you sir for sharing your know-how to us. More power.
Great techniques, wasn't clear before I watched it
Thank you. This video has saved me $$$. Keep doing what your doing man. Subscribed.
I just went thru this with my 2008 Lucerne. I honestly thought it was a problem with the transmission hard shifting. I also noticed that I felt every small bump in the road (I had replaced my struts a bit ago because they were bad). I figured my tranny was going and that I just had poor quality struts. Took it to trans shop and they found the engine mount bad. I guess you learn something every day right? I felt dumb - but I am not a mechanic by trade but like to do all the work (if possible) on my cars. This one just slipped by me. Runs great now. I guess with the broken mount, Any suspension vibration was amplified because of the lose engine. No more "hard shifts", Runs very nice now.
@Sumermak
Жыл бұрын
I’m having this same problem. Thought the same thing you did, bad trans. But my car was vibrating more than normal and I keep having a hard clunk between 1st and 2nd gears and clunking when I would come to a stop. Had someone get in the car and put it in reverse and park back and forth and sure enough the engine moved very visibly back and forth forward and back. So I think my mount (dogbone) the one in the middle underneath is the bad one.
@northpoint1039
Жыл бұрын
@@Sumermak Its kinda relieving to figure out its the mount instead of the transmission :)
@Sumermak
Жыл бұрын
@@northpoint1039 yeah same! I’ve already had one motor mount done although I wasn’t told which one it was… so it’s funny how I have another one bad… the last one was “done” a month ago. 🤷🏻♀️
I like the good ol" fashioned parts repairs videos now and again. Happy Thanksgiving!
very useful !!! Thanks!!
Rear mont bad on these will cause it to vibrate like crazy at a stop light and I will cause the passenger axle to bind up up and go bad as well.
I have one of that bent ratchet, husky made them, got mine from the Home. Depot years ago.
Happy Thanksgiving from Iraq! My 06 Grand Prix GXP had that same issue with the motor mount in the front (different engine but same issue). Mine had split in half and I found out it was bad as I was taking out the motor to repair a rear main seal and address some broken exhaust bolts in the back of the motor since they are hard to reach, figured why not just pull the motor out.
Awesome being able to get it done with all the proper tools. A true mechanic.
Good Morning Eric. Good work. Have you ever supported the engine. Then Support the front of the sub-frame remove the front sub frame bolts Lower the sub frame remove the mount. with out having to remove the bracket. I know your going to say. To much rust and the bolts will break off or strip. Right?
Sometimes with bolts it’s just like “You can see it, but ya can’t touch it”
Good video. Great info.
Before your day, GM modified the driver side motor mount on their V8s. The mount would tear and the engine lifted up so the fan hit the shroud. The fix was a 1/4" cable wrapped around the upper part of the mount then connected to a lower mount bolt. If the mount broke you'd never notice it. At the time a fairly well known bandage.
You forgot to say click when you torqued it to spec Eric!
@steveorshon
5 жыл бұрын
Or two ooooga-dooogas.
1. Eric great video. I own a Civic and when I go forward at slow speed and when I reverse at slow speed, my dash vibrates and I think it is one of my engine mounts that needs replacing. Thank you for the instruction video. 1. Your wife made me laugh when she said................'Well if it is wrong, it's your fault'. My wife says the exact same thing to me when she isnt sure of something but wants to avoid making an error.
@shanielclarke1210
4 жыл бұрын
Did it stop?
@Michael-fw5ef
4 жыл бұрын
@@shanielclarke1210The sound went away, but I didnt do anything. It went away on its own. It is probably an engine mount that is going bad
It's almost 1 am so I will test this out tomorrow on my 2004 Ford Expedition. My upper radiator hose keeps blowing off and I tried new thermostat , new upper hose, new coolant cap, flushed the radiator several times....But was wondering if my motor mounts are in need of replacement and that's why my upper hose keeps popping off.??? The first time it happened was when I really stepped into it in-order to get up to highway speed. Maybe that was when the mount or mounts failed enough for the first time. The engine will run for weeks at proper temperature and then she'll pop again... Never overheats either...just keeps blowing the upper hose...Hmmmm... Great Video
Great video, well done. Thanks.
Nice job Eric!
No $10k snap-on scanner? No hour long lesson in quantum physics? Now this is a video I can understand. Thanks Mr O for these shorter dyi freindly vids..😆
I have to agree with most, great video. I just wished that you had driven the car before so we could compare the clunky noise to our cars. Mine is a making a noise to, first shop I took my car to told me it was the lower arms, and the second guy at a different shop said it was my motor mounts, he did the same test that you showed on your video when you put it on drive, it did had some movement, all along I thought it was normal on most cars. Second I wish you could show the or compare the new motor mount next to the new motor mount for us to see the difference. All and all great video. Btw cool pencil like flash light. Thumbs up! Btw I own a Cadillac SRX 2011 Dallas Texas.
An engine support bar be nice for this job if you don’t have a lift and it’s better then supporting it with the oil pan. What I used to change all my engine and transmission mounts.
The Doc is back after a short vacation! :)
@SouthMainAuto
7 жыл бұрын
Yeah tough doing vids in the middle of deer season haha
@billleslie5215
6 жыл бұрын
South Main Auto Repair video is nicely done nice work
Happy Thanksgiving Eric to you & your family
@SouthMainAuto
7 жыл бұрын
Thanks sir and happy thanksgiving to you and your too!
Thank you so much for this video Eric!!!!.....it is so much usefull!!!....above all, how to do to be sure that motor mounts are bad???!!!!....and that ratched!!!...is magic!!! hahahaha....I´ll get one of those!!!, without it, that bolt would be a nightmare!!!!....imposible to get out!!! hahahahaa...Dont forget us Eric!!! (quite long without a video)...Greetings to all at SMA!!!!....Have a good Thanks Given Day everybody!!!!
Big Help!!!!!
"Yeah baby!" Spoken like a true mechanic.
If the front mount is bad then i would changr the rear mount also. The front back lift from the engine torque will stress out the rear. I would change all 4 if possible. I bought a complete mount set on line for 67$ free shipping.
@johnfrese4851
5 жыл бұрын
But you would have to figure that a person would be able to afford to replace on at that time. But I go agree with you replacement of all three if possible. But it is also mount plus labor and x all and labor
On a side note; beware of silicone aftermarket motor/tranny mounts. They say they have extra longevity but you sacrifice vibration for the extra toughness. And Hooray for mama!!!
nice eric! we been missing ya.
Great job Eric O! Happy Thanksgiving!
Eric O Mrs O is never an unwanted distraction. Is the index-able ratchet a SO? I've got a1/4" but nothing bigger. Looks handy.
@notejones9927
6 жыл бұрын
Harbor freight has one with life time warranty
Happy turkey day Eric.
way is everyone so critical on the small all stuff,maybe they should make their own channel, I think your doing a great job,keep it up. peace
wow such a great video. Love the angle!
good morning. Happy Turkey Day.
Thanks for the video.
Great video ! I'm i the only one that noticed this is an 06, and its not rusted through? Better yet no rust at all! -Happy Thanksgiving SMA! Hope you guys have a great one
@Blazer02LS
7 жыл бұрын
Probably has 10,000 miles on it and only gets driven in the summer.
@SouthMainAuto
7 жыл бұрын
PA car ;)
@jtoddk98
7 жыл бұрын
PA doesn't salt roads?
@shahsmerdis
7 жыл бұрын
jtoddk98 probably not as much as Rochester Avoca area.they also use liquid brine solution that does penetrate through frames
so nice
Great job mate.
Great video bro 👌🏻, shouldn’t you change both ?
That particular mount is good for about 30,000 miles, don't ask me how I know that. TheReaper!
@amandazeller787
3 жыл бұрын
@ThePariss333 Anyone got 163,000+ miles on this type mount. Please reply.
Ev1 keeps talking about not removing that bracket. I'm guessing that locator pin and more than that, the stud has to go thru that bracket also has changed the game , to make it necessary to remove it now. I've changed that front one on older buick before without having to do more than remove the nuts and support the engine but not on a lucerne. Aggravating the way those mounts don't hold up. Excellent repair video as always and Happy Thanksgiving to all the SMA crew !
Well done. I do wish the sound had been recorded. Maybe for another video.
that classic reach around move works every time
Great job as always! Have a nice Thanksgiving!
if i could work for eric on the weekends i would
@SouthMainAuto
7 жыл бұрын
Come on man we hunt on the weekends around here :)
Nice one Dr. O. We won't mind if you put out videos you have already done before, ie changing brakes, cv shafts. Each model must have little variances to getting er done. Happy Thanksgiving!
When I do motor mounts. I only use O.E. mounts. Aftermarket mounts can make an engine vibrate like hell.
@dewaynemaiden
5 жыл бұрын
I just told a guy that, doing his mount, I can get full set from ebay for 90, I said do you want your car to vibrate like crazy, cuz it will with cheap ones, guaranteed!!!!
@rideordie3305
5 жыл бұрын
@@dewaynemaiden Damn straight.
THANK YOU! ! !
another great one happy thanksgiving be safe god bless
It's important to have a good mount
thanks for this good information ...
very helpful, Thanks Brother
One of the best channels on KZread!! Do you done engine mount replacement on the Tacoma second generation???? Thanks
That was a nicely separated engine mount! I think I still prefer the high-mounted mounts from the older GM V6s, though. Call me crazy if you like~ Have a great Thanksgiving, Eric! :D
GOOD TO KNOW
On the 2004 Chrysler Pacifica when frt mount goes bad it also pulls the top radiator hose back or off causing a leak.
Great video as always Eric! Hope you and your family have a great Thanksgiving! From Texas!
“Lifts go up, lifts go down.” Wife slams door shut. 🤣🤣🤣
Great Video, nice job, be nice to Mrs. O!
Be careful with those engine mount brackets. I've managed to arc on the starter and practice some welding. I've changed many of these mounts and sometimes it happens haha
@mrbreezeet1
Жыл бұрын
Disconnect the battery? 😂