B6.2 Race Buggy Build Series - Part 1 - From Roller to Race Car
Спорт
This is video one of our new build series on the Team Associated B6.2 2WD 1/10 Race Buggy. We intend to carpet race this buggy, but first we need to add electronics and finish it off.
Items we used:
Team Associated B6.2 1/10 2WD Buggy Kit: www.amainhobbies.com/team-ass...
Maclan MMAX 100A Pico ESC: www.amainhobbies.com/maclan-m...
Maclan Team Edition V2 17.5T Motor: www.amainhobbies.com/maclan-m...
Team Associated 29T Aluminum Pinion Gear: www.amainhobbies.com/team-ass...
ProTek R/C 160T Low Profile Servo: www.amainhobbies.com/protek-r...
ProTek R/C 2S 120C 5800mAh LiPo: www.amainhobbies.com/protek-r...
Pro-Line Prism 2.2" 2WD Front Carpet Tires: www.amainhobbies.com/proline-...
Pro-Line Pyramid 2.2" Rear Carpet Tires: www.amainhobbies.com/proline-...
Ruddog RR482 Sanwa Receiver: www.amainhobbies.com/ruddog-r...
ProTek R/C 30mm Aluminum HV Fan: www.amainhobbies.com/protek-r...
ProTek R/C Clear Double Sided Tape: www.amainhobbies.com/protek-r...
ProTek R/C Universal 1/10 Chassis Protector: www.amainhobbies.com/protek-r...
Tamiya White Lexan Spray Paint: www.amainhobbies.com/tamiya-p...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com
MUSIC BY: @DCUTTERMUSIC / HTTP://WWW.DAVIDCUTTERMUSIC.COM
Пікірлер: 142
Amain hobbies, one of the biggest and best stocked RC companies in the world ........ builds with paper party plates ...LOL. Nice to see something other than Tekin or HW for Esc / motor. I got a maclan setup in the mail for a mod buggy build. Another great video bud. Cheers
Learned more in this one video than weeks on weeks of other tutorials and research... awesome job!
Everything on the chassis just looks so smooth and durable. Great build brett👍Cant wait for the upgrades😎
YES!! Another build series, loved the MP9 series so it's guaranteed that this will be a great series
Thanks for getting my order to me in a timely manner im glad you have a new location on the east coast also like your videos I've learned a lot from this channel
its so funny the "budget electronics" you recommended are exactly what I put in mine. can't wait to see the next part.
@richarddarlington1139
2 жыл бұрын
Well, it's been a year, how's that stuff working out for you? I have a fresh B5M with the wrong ESC. It needs to be swapped out.
@michaelhenecke
2 жыл бұрын
@@richarddarlington1139 have never raced/driven it finished building it just as the pandemic lockdowns hit and haven’t gotten it to a track yet but it’s funny I just pulled it out Thursday and was thinking about going to the track to try it out just haven’t had the time yet
@richarddarlington1139
2 жыл бұрын
@@michaelhenecke Same here. I built this thing back when it was the hot ticket. Beyond doing donuts on the kitchen floor and a few runs in the parking lot, I've hardly driven it at all. Some day...? Peace!
Loving the "build series" -super helpful!!
@EricFalkDesign
4 жыл бұрын
...Just ordered my kit per your videos. Can't wait to upgrade and get it to the carpet track near me and start racing!
Kick ass man I'm get this kit. Trying to put together budget electronics from your list. Thanks again.
I really like this idea and look forward to seeing the upgrades that are made each week. What I’d like to see now is a head to head comparison of this vehicle with the budget vehicle that you almost built.
Wow great setup! 🤤🤤🤤 I just love new setups like this ✌🏼😎👍🏼 Awesome build Brett! 👍🏼👍🏼
Loved MP9. I think most people were amazed at the performance from a high quality servo in the MP9. They are so ridiculously expensive to people new to the hobbie they do not believe that there could be that much of a difference. But when you can walk your car off the table instead of turn the wheels the difference is obvious
Yeah!!! Amain has a East coast wearhouse now!!!!😎
Oh once more you impress us with that custom paintwork! True workmanship! :D
@AMain_Hobbies
4 жыл бұрын
Thank you Roger! We have every paint color available but no time to paint sadly. We need to find someone local to paint a quality job. The white is very easy to see on the track though. -Brett
@skagerstrom
4 жыл бұрын
@@AMain_Hobbies Sometimes the simple stuff is just right :P It was just a callback to the last time you build a car and you said that it was getting a custom paintjob :D Laughed my ass of :D
My new faviourte rc related channel 👍 good work
Hi Brett, awesome video, the buggy looks amazing, can’t wait to see it running in anger at the track.
Just picked this motor esc combo 😁 from a main for 209 🥰
Race car deserved the pro treatment good job
Cool concept 👍 Buggy looks awesome 👌
Wow that great video this is my favorite buggy car.
Love these build series
Good job, My Friend! Stay Safe!😎👍
Love my maclan combo 17.5 pico, tuned @5.2 amps
Looks pretty sweet ride
Build series and Bret is the best!
love your vids man, keep it up!
Hey awesome video. Really enjoying all your videos.
awesome video as always Bret.
These build series videos are awesome! How about for the next one you do a class 3 monster truck.
I'm planning to get one!
Welcome to the east coast. Now i can get my rc goodies faster.
Great vid
Would've been cool if you did both builds from ground up one like this one and to compare directly a budget build. Would be awesome
A fdr of 6.45 is pretty high for 17,5t racing. I use a fdr of 5.2:1 in my 17,5t stock buggy.
I trimmed a few mm off fan mount and side rail to give more clearance for the fan and air flow
@AMain_Hobbies
4 жыл бұрын
Nice, good tip to keep in mind. -Brett
All I'm saying is if you put any parts on this buggy that I have backordered right now I'm not going to be to pleased! But I'm still excited because it's a new video from AMain baby!
@AMain_Hobbies
4 жыл бұрын
I'd be mad too Bobby. But if it's backordered for you, it's backordered for me, so all the upgrade parts used were parts in stock at the time of purchase. -Brett
Tip. Pretty much all fans in electronics. It could be RCs or PCs the fans blow toward the brace.
@AMain_Hobbies
4 жыл бұрын
Good tip David! -Brett
OMG, A MAIN HOBBY, I never knew that's what amain meant until the hat had a as orange and main as white😂😂😂😂😂😂😂
Nice video as always Bret , but for people that don't know you seem to have passed the sensor wire upwards like the motor power wires , at first I thought you forgot about the sensor wires but afterwards I saw that it was tucked in with all the other wires. Keep up the good work.
@AMain_Hobbies
4 жыл бұрын
About 6:45 we briefly mentioned the sensor wire. It looks clean shrink tubed, but it will be an issue if/when it needs to be replaced. -Brett
@alexr9030
4 жыл бұрын
@@AMain_Hobbies I think I need to be more focused.when I watch your videos instead of wrenching on my cars and doing 2 things at the same time 👍😝
Just build mine waiting on tires now from yall first build took forever lol
@AMain_Hobbies
4 жыл бұрын
Congrats man. It does take some time but you probably know that that car like the back of your hand now. Hope those tires come soon for you. Are you going to race on carpet too? -Brett
@ejb2184
4 жыл бұрын
@@AMain_Hobbies yea be racing carpet at my local track
Can you guys make one of these series for the TLR 22 5.0 SR roller or a DC elite for dirt tracks? Would be a great alternative with not only a different surface type but also a different brand on another 2wd buggy. And you should use the budget stuff for a comparison to the other stuff used!!
😲👌👍👍👍😍 nice
Oh yes Realy nice
fun things with fans, the air almost always will blow out the side the has the "posts." The open side is almost always the intake side.
#1 thing noisey fan would have to go,everything else 👌 and since fan is close to body and need air it self a reverse air scope on side
Great stuff! I bought a used B6. Can I upgrade (and should I?) to the B6.2? We race on loose dirt
@AMain_Hobbies
4 жыл бұрын
You should be able to make many of the changes. I would recommend taking a look at the dirt version, the B6.2D: www.amainhobbies.com/team-associated-rc10-b6.2d-team-1-10-2wd-electric-buggy-kit-asc90024/p1157949 The B6.2 is more suited for high bite clay, carpet or astro surfaces, so it is not ideal for dirt. -Brett
I dig the chassis protectors, are they mainly for these buggies? I'd like to use em for our mini T2.0 and soon MiniB. But worried about access to screws? Like it would be cool to use em on my son's Granite but there's a scr8at the bottom that needs taking out to fix gear mesh or other things. Thanks Amain
@AMain_Hobbies
3 жыл бұрын
They've become popular with the 1/10 race cars and really help to preserve the new-state of the aluminum chassis. Most sheets are cut for specific chassis shapes, but these universal sheets would be great for you: www.amainhobbies.com/protek-rc-universal-chassis-protective-sheet-black-2-ptk-1102/p447145 Just clean the chassis really good before with rubbing alcohol, and remove the front bumper if it attaches on the bottom so you can get the sheet under it; then reattach bumper. We show the install of a universal protector in this video kzread.info/dash/bejne/npmrs5mPcbK1qtI.html at 7:56 Hope that helps. -Brett
can you do a upgrade series over the RB10 like the build serie you have here
What battery did you suggest with the budget build in mind? I've got everything in my amain cart just need the battery before I pull the trigger on this kit. Thanks again
@AMain_Hobbies
3 жыл бұрын
Nice Scooter! Congrats on pulling the trigger. Sorry to leave you waiting for a reply, but for the budget build, a Gens Ace 2S would have been used probably. This 5000mAh: www.amainhobbies.com/gens-ace-2s-shorty-lipo-battery-pack-60c-w-4mm-bullet-7.4v-5000mah-gea50002s60d/p530207 Or this 4600mAh to save a little money: www.amainhobbies.com/gens-ace-2s-lipo-battery-pack-60c-w-4mm-bullets-7.4v-4600mah-gea46002s60d/p635628 Hope your build goes well Scooter! -Brett
Setting the gear mesh? I read about and found video, but I am unsure about how much play is needed. And is there lubrication placed on the pinion gear?
@AMain_Hobbies
4 жыл бұрын
No lubrication on the pinion. And you want just a little bit of play in the gears. A good measure is to run a piece of regular white printer paper through the gears and tighten up the motor with the gears pinching the paper. Then run the paper out and there you go. You just want the gears to have a little rocking motion in them. -Brett
hey how to choose pinion gear T number, and what a difference it makes, i am aware you use 29T for this car. based on what consideration? i am new to this hobby so sorry for the basic question
@AMain_Hobbies
4 жыл бұрын
That is good question. The buggy instruction manual has a gear chart in the back, and suggested the 29T pinion gear to be used with a 17.5T motor. If we gear up and use 30T pinion gear, we gain more RPM but lose torque; if we gear down and use 28T pinion gear, we gain torque but lose RPM. Gearing can be good tuning aid for big or small track size. Hope this helps. -Brett
@hobbyclubofficial
4 жыл бұрын
@@AMain_Hobbies i see, okay now i understand. wow it really opens up my knowledge. thank you for info, cheers
Is b6.2 use the same gearing as same as the sc6.2 what spur gears can be used used on it?
Wouldn’t you want the fan to be pulling hot air away from the motor rather than blowing ambient temp air on it?
I’m getting back into rc after 20 plus years. I just bought the b6.2D kit today. I’m over whelmed with the changes in electronics. I use to get all my info from RC car action magazine. Where does one go these days to gain knowledge on current gear that’s out there? Anyone?
@AMain_Hobbies
4 жыл бұрын
Mainly KZread videos or R/C forums. R/C Car Action still exists too if you would like to receive the magazings. The AMain Hobbies email newsletter also sends out lots of new product info to your inbox. Go to www.amainhobbies.com/ and at the bottom there is a sign up option. -Brett
@OlKutty
4 жыл бұрын
AMain Hobbies Already signed up! Thanks for the reply!
@AMain_Hobbies
4 жыл бұрын
@@OlKutty Oh great! If you have any other questions though, let me know! -Brett
Cool video man, do you use standard dif und shock oil ?!
@AMain_Hobbies
4 жыл бұрын
The diff fluid is measured in cst and we use wt for shock fluid (although shock fluid is also offered in cst as well). Is that what you mean? -Brett
@OFdiastermaster
4 жыл бұрын
AMain Hobbies no sorry, do you use the oil (shocks and differential) that come up with the box or do you use higher or lower cst oil because you know your track and the setup?
@AMain_Hobbies
4 жыл бұрын
Oh sorry. We used the stock fluid included with the kit, although we may change the fluid to better suit our track. Thicker diff fluid may be better for the high traction carpet, and the front shocks may need thicker fluid as well. -Brett
@OFdiastermaster
4 жыл бұрын
AMain Hobbies thanks mate! I think the a brass bulkhead is important too.. cheers from Germany
@AMain_Hobbies
4 жыл бұрын
@@OFdiastermaster Cheers to you as well! Thank you. -Brett
Anyone else notice the axle height bushing in the rear hubs wear out amd get ovaled out really fast or am I going crazy
How do you get to the screws on the bottom of the chassis with that chassis protector? Do you have to take it off every time?
@TrashCanNinja87
4 жыл бұрын
Yes. But usually you can cut the back portion so not taking whole protector off.
@AMain_Hobbies
4 жыл бұрын
You'd have to peal it back or cut out screw holes, which I've done in a pinch. -Brett
What controller would you recommend for beginner? Best bang for your buck?
@AMain_Hobbies
3 жыл бұрын
For competition use, I'd recommend one of the Sanwa or Futaba systems. This is the Futaba 3PV: www.amainhobbies.com/futaba-3pv-3channel-2.4ghz-fhss-sfhss-radio-system-w-r304sb-receiver-fut01004347-3/p506145 And this is the Sanwa MX-6: www.amainhobbies.com/sanwa-airtronics-mx6-fhe-3channel-2.4ghz-radio-system-snw101a32561a/p754115 Both of these are great transmitters and offer a lot of programming and functionality. -Brett
Is there anyway I can get rid of the velcro straps and convert to body pins on b6.2?
@AMain_Hobbies
3 жыл бұрын
There are probably some body posts that would work but I don't know specifically. For that, I recommend sending Team Associated a message letting them know your goals and asking what parts you need. -Brett
How come you didn't do a video for the Losi 22 5.0AC?
Can you do this with the RB10?
hey Brett, i have a question, what is a good roller that is suitable for bashing around 250-300 bucks. i live in Dubai so everything has a higher price because of import charges.
@TrashCanNinja87
4 жыл бұрын
Look into hobao for rollers.
@h.w.m.306
4 жыл бұрын
@@TrashCanNinja87 yeah I saw a hyper 10sc on eBay bit like 200 bucks new, night go for that
@AMain_Hobbies
4 жыл бұрын
I apologize for those comments; they have been deleted. For a good bashing roller in that price range, I'd look for an electric 1/10 scale platform; whichever you can easily get parts for (that is most important). I would not recommend a competition buggy like this B6.2 for general bashing; instead look for a Slash 2WD, Slash 4x4, Arrma Big Rock, or a Kraton. Something you can use a 2S or 3S LiPo in. -Brett
@h.w.m.306
4 жыл бұрын
@@AMain_Hobbies No problem Brett, I should have been the one to stop it, thanks for stepping in and thanks for some recommendations, also does AMain ship to UAE? Would be great if they could, everything is tripled in price here so its a very small community. Thanks again!
around what is the total price for the whole build
what wheel nut drivers do you use?
@AMain_Hobbies
4 жыл бұрын
It's the ProTek SL 7mm Nut Driver. This one: www.amainhobbies.com/protek-rc-trutorque-sl-metric-nut-driver-7.0mm-ptk-8415/p863872 -Brett
Should have gone with Schumacher tires
can you do it so you have a maxed out car that's really expensive and have a cheaper version for people getting into the hobby like me.
@AMain_Hobbies
4 жыл бұрын
For now, this is the one car we'll have for videos. -Brett
Are all of those electronics ROAR legal???????
i want to see more bashing cars like a budget friendly nitro or electric. love this racing builds but i would love to see 1/8 or 1/10 nitro basher
@TrashCanNinja87
4 жыл бұрын
Nitro doesnt have many choices these days.
@h.w.m.306
4 жыл бұрын
@@TrashCanNinja87 hoabo does😉
@TrashCanNinja87
4 жыл бұрын
@@h.w.m.306 yea but no hobby shops carry the parts near me. If they did i would have 1 or 2 hobao its a shame.
@h.w.m.306
4 жыл бұрын
@@TrashCanNinja87 omg exactly the same! All they sell here is traxxas, losi and HPI. Only what they think are big brands
@adamlitho6448
4 жыл бұрын
@@TrashCanNinja87 1/10 hsp warhead, traxxas nitro slash/slayer and rustler, revo, stampede, bandit 1/8 hobao hyper 7, losi 8ight series, hobao hyper ss truggy, vrx2, just to name a few off the top of my head
where can i buy some of this plssss Plss
@AMain_Hobbies
3 жыл бұрын
Hey Nathaniel. Check out our shop: www.amainhobbies.com Let me know if you need help finding anything. -Brett
Can I use the b6.1 chassis pprotector
@AMain_Hobbies
4 жыл бұрын
No. The B6.2 chassis is 3mm longer than the B6.1 chassis. The B6.2D chassis is the same though. -Brett
@mikej8832
4 жыл бұрын
Chassis protector? Wtf chicks dig scars so show those scars 😂😂😂😂😂
@ejb2184
4 жыл бұрын
@@mikej8832 my track requires it lol
@mikej8832
4 жыл бұрын
@@ejb2184 FYI that was sarcasm and a reference to the Movie 'The Replacements' well close to the speech at the end
@ejb2184
4 жыл бұрын
@@mikej8832 lol
the fact that the servo was $20 more then the motor lol
I'd much rather have the old slipper nut location and fan location.
A set
😊🤙🇦🇺🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻
supposed to put the sensor wire down the channel too silly!
@AMain_Hobbies
4 жыл бұрын
It's a good idea but our sensor wire isn't flat. Maybe when the sensor wire needs replacing, we'll invest in a flat one. -Brett
Did ShoeNice get a new hobby
Two questions; Why are the bodies so ugly and, why is there not enough room in these things?
@massid3774
2 жыл бұрын
they arent ugly
Should've been a TLR... smh
@gimiked8685
4 жыл бұрын
Yea I was wondering how my tlr 22 5.0 elite would fair against it. I'm not set up for carpet though. Love yo vids Ryan keep up the quality stuff.
@corywilliams3831
4 жыл бұрын
Ryan Harris Damn it's only been a couple months since your switch and you're already drowning in hatorade 😂 JK love your vids 🤙
@AMain_Hobbies
4 жыл бұрын
We'd love to try out the TLR. Ask them to send us one! -Brett
Another buggy kit with no wheels.
Man that AE body is PR Racing ugly :(
Never use power tools with RC. We’ve known that since the 80’s.....
Hello, Excuse me but never use a power drill or anything with power on your screws on your RC. What is wrong with you telling people who never built an RC car before, enable them to strip out their screws and bolts, what are you thinking. I like your videos but sometimes you need to think more clearly on your directions. Thank you, peace out