Thanks for making a vid. I have 6 b&gs and been wanting to make a vid on this very thing. Weird not much pest control stuff on KZread. I want to do one on skid sprayers. Thanks again

@Samlol23_drrich

3 жыл бұрын

Thanks for taking the time to comment. The sprayer can be completely rebuilt, and the online manual/pasts list is so awesome. Unfortunately, for the life of me I couldn’t find a video or diagram explaining how to remove that nylon anti drip wire. All I knew is the sprayer was dripping from the tip, and I had the parts diagram. With six of em, I’m sure you could take em apart and put them back together in your sleep, but thanks for watching and the nice words. I’ll definitely watch if you do one on skid sprayers!

@harshtimes23

3 жыл бұрын

@@Samlol23_drrich yes I have but I’ve learned through trial and error pulling the nylon wire the wrong way or putting it all together and it pressing on the trigger and it keeps spraying seat stem is not adjusted correctly. Again, thanks it helps to have a different view on how to disassemble it.

Accidently left the b&g in the vehicle over night and the wand froze and burst. This is exactly what I needed to save the 2nd half of my day. Thanks for making this!

I really appreciate the video. One of my guys left their B&G in truck, froze up, saved money not having to buy the entire wand assembly.

@Samlol23_drrich

4 ай бұрын

You can buy any individual part for these which is awesome. Thanks for the nice comment!

Outstanding video. Thanks a bunch for making this, really helpful and made my swap out a breeze. Last time I changed one of these out it took forever. Many thanks

Thanks for the video. I needed a quick refresher course on the B&G wand

Thank very much for your video, tomorrow early morning I have an emergency pest control service and my sprayer was not working properly and with the help of your video I was able to fix it. I'm from Mexico. Best regards and thanks again!

@Samlol23_drrich

2 жыл бұрын

That made my day! Glad it helped and thanks for commenting

Thank you for this video. You just helped me solve a problem out in the field at work. On the first job on the first day back from Thanksgiving break. Thank you!

@Samlol23_drrich

2 жыл бұрын

As stupid as this sounds, thats why I make these videos. So many peoples videos have really helped me in the exact same way, I figure if it helps one person it makes me feel really good. So thanks for making my day with your comment!

Awesome Job This is the 3rd time I've had to disassemble to thoroughly clean all of the sediments and gunk. But after 3 years of not doing it. My gray matter needed a refresher and you NAILED IT

@Samlol23_drrich

Жыл бұрын

Thanks. I’m gonna have to watch this again soon. It’s cleaning time for me too.

Great video!Very helpful!👍👍Thanks!!

@Samlol23_drrich

Ай бұрын

Thank you as well for leaving a comment. It's very much appreciated

Thanks for the video I recently purchased a brand new B&G from local supplier...within 8 months the screw fell out from handle, wand cracked in several places replaced it...then main cylinder cracked that pressurize the tank...so I called supplier they did replace cylinder for free but as of lately I was told there have been several complaints on quality/durability has went down...I would definitely not purchase another one anytime soon...I have an older B&G that I use also that has never had any major issues except for replacing gasket and seals....your video was very helpful though in replacing wand...also in Brooksville FL Airfog sprayers will replace B&G parts with better quality stuff and also sale there versions of B&G sprayers in my opinion are way more high quality and durable

@Samlol23_drrich

2 ай бұрын

That's incredible! The only failures I ever hear about are guys leaving em in their trucks in the winter up north where they can freeze. You should send this directly to B&G. They should send you a brand new unit. Period. I'll keep it in mind though

@Freedom2219

2 ай бұрын

@Samlol23_drrich the supplier I purchased from said they did contact B&G and their response was they would replace parts only....I told them I wanted a new one since it was less than a year old I was told no....I'm in Central Florida hardly ever gets below freezing and I take precautions if it does with my equipment and the cracked wand and cylinder happened in March and April never got freezing temps then...but I will contact them directly now that you mentioned it for sure

@Samlol23_drrich

2 ай бұрын

@@Freedom2219 you were right to ask for a new one. I would probably write a nasty letter to the company directly then move on. You never know.

Thanks for showing the mesh strainer at the end. I bought a used 1 gallon B&G that was sold for parts. I went through the entire thing. Even the pick up tube in the tank was clogged. I heated, used solvents etc to try to get that strainer out. The sprayer worked but had low pressure and I eventually had to use pliers to remove the strainer in pieces. I wondered if it was put in correctly and your video confirmed that it was. Without the strainer, it sprays like a new one. Now, I will replace that part and have me a very nice sprayer for 42 bucks. The handle could not move the cable at all when I received it. Corrosion from sitting with chemical inside I guess. I also like to take the spray tip off when finished rinsing have the pump off tank and invert the tank over my head to let the hose drain after cleaning. You do have to squeeze the handle to let it drain. The less water etc in the line, the better in my opinion.

@trigatupp

6 ай бұрын

wow great deal the cable cost $45 every part is gold when buying them.

About to attempt my first cracked wand. I learned a lot and will be watching this while I’m doing it 😆 Thanks for making me look competent.

@Samlol23_drrich

Жыл бұрын

Good luck and thanks for the kind comment. See one, do one, teach one. You'll be showing others how to do it in no time! Thanks for watching

Thanks it helped me the adjustment screw is very hard to put o this video helped

Thank you for this!!! This is immensely helpful!!!

@Samlol23_drrich

2 жыл бұрын

Appreciate the comment!

Excellent video. If you have another video for the parts of the tank that would be awsome. I live in Brasil and we got some of these sprayers as well as the accu professional and if they are well maintained our service gets better.

Thanks for this video! I was struggling

that was a great video! thank you very much.

Not such a mystery anymore! Thanks!

@Samlol23_drrich

2 жыл бұрын

Glad it helped!

Great video very helpful thanks

Saved my ass thanks man

Appreciate the vid, accidentally left my sprayer on the truck last night and the wand burst, at least now ill know how to replace it 😅

@Samlol23_drrich

9 ай бұрын

Whoa. You must be way up north. It got into the high 20s where I am but to burst its gotta be really cold

@deadmau56661

8 ай бұрын

@@Samlol23_drrich only in va, i think it was maybe 28 the night it happened. So i replaced the wand extension and everything seems to be working but i noticed when i release the handle it stops spraying slowly like its hard for the wire to release. Im using the same wire, do you think it needs to be replaced or something might not be seated correctly?

@Samlol23_drrich

8 ай бұрын

@@deadmau56661 it’s probably not the wire. Mine was a little sticky at some point also. Pulled the trigger all the way and squirted a little wd40 on the wire part that goes back into the trigger area and that seemed to fix it. That happens periodically. I would squirt Ed 40 into both the very front and very back wire areas. I would start with looking at time stamp 14:44. So squeeze the trigger like I did at that timestamp and hold it in. Then squirt some wd40 on THe Half an inch of wire you see at 14:44. Good luck

@deadmau56661

8 ай бұрын

@@Samlol23_drrich will do, and thank you, youre a savior 🫡

Just bought a new b&g about 6 months ago...went to use it this morning first stop went to pump it up went in customer building and the wand started to leak just above the curve and looks like it split about 3 inches...no clue how 🤔 but thanks for video will be replacing asap with new wand....luckily I had some spare parts and was able to finish the day

@Samlol23_drrich

3 ай бұрын

Maybe send a photo to the company and they will replace under warranty. You never know. Especially if it wasn’t left somewhere it could have frozen cause you know that’s what they will say if you don’t tell them it didn’t freeze first. If it was me I would remove the sprayer, take it apart enough to make sure there was no liquid inside and then use some of the original JB WELD grey epoxy over the split. That stuff is great and will seal it up. . You can probably use some painters tape down the sides of the split to make it look nice- just peel it off right after you put the epoxy on (while it’s still wet). . Even if you buy another I’d probably try the epoxy and keep it as a spare. Good luck and thanks for commenting.

@Freedom2219

3 ай бұрын

@Samlol23_drrich appreciate the reply...I know it didn't freeze I'm in central fl hardly ever gets below freezing

Good idea using the clamp

@Samlol23_drrich

2 жыл бұрын

Thanks! It was the only way that I could think of to make the thing stand up on its own. Appreciate the comment!

I also ask how to remove the item 30 which is the safety lock nut and is extreely difficult to remove. In fact I want to dissassemble it all, wash all parts and assemble again, but that safety lock nut is not easy to remove and replace.

De mucha ayuda, gracias por compartir

@Samlol23_drrich

Жыл бұрын

No hablo Espanol pero de nada! (Un poquito solamente)

@pedroaguirre8454

Жыл бұрын

@@Samlol23_drrich and I don't speak English very well, I understand it when I listen to a conversation but I don't speak it well. this week I had to replace the cable of my B&g and I was looking for tutorials on the web. I found your video and it was very helpful, mostly because of the tips, such as pressing down on the gun to place the tip gasket. greetings from chihuahua mexico

Washers fell out of handle on me. Worked on it for over an hour and gonna scrap it.

@Samlol23_drrich

2 жыл бұрын

Those white nylon ones? How? These?www.domyown.com/bg-valve-packing-washers-teflon-part-vp151-pack-of-p-1231.html

Great vid thx very much...am I able to just put a new o-ring in that soft seat gasket or do I need to buy the whole metal assembly? I assume it's just an o-ring in there? A new kit is $50-$60!!!

@Samlol23_drrich

3 ай бұрын

Here’s the best way to find out. I’m not sure off the top of my head. Here are the parts. My guess is you can buy just the gasket. bgequip.com/content/product-sprayer-primeline-tank-sprayer-selection-guide-USA.pdf

I can't seem to figure out why I continue to get drips unless I pull the handle backwards after I squeeze it. It doesn't spring back tight enough to seal the pressure at the tip. It has done that ever since the day I bought it. I guess I'll do a full dissasembly and start from scratch.

@Samlol23_drrich

3 жыл бұрын

That's odd because the spring is really strong. I would do what you said- take it all apart

@bigbugkiller530

Жыл бұрын

Your spring is broken my Freind

Not easy tried 3 time adjustment screw very tough to put on

fantastic but I would like to know how to take those white rings out the body because thye can be the reason of the leaking

@Samlol23_drrich

3 жыл бұрын

I think those are merely spacers and wouldn't be the cause of a leak, but I would grab them with a small pick like you would use for a gasket. Something like this www.amazon.com/dp/B000NPPBQK/ref=cm_sw_r_cp_apa_glt_fabc_ZR7895DBG325M4Y3V5GE

@LuciaSchuller

3 жыл бұрын

@@Samlol23_drrich Hi I have a leak and I need to find why, that is why I thought about those white washers. Maybe they are worn out, what do you think?

@Samlol23_drrich

3 жыл бұрын

@@LuciaSchuller I'm far from an expert in this field, but I can give you my opinion. Where is it leaking from?

@sweetor6714

2 жыл бұрын

The white rings in the body are packing. When the packing nut is tightened the rings make a seal between the body and the valve operator (wire).

I'm guessing that because of the inner tube, you can't just replace an 18" wand with a 9" wand huh?

@Samlol23_drrich

4 ай бұрын

I'm guessing here but I wanted to answer you. If I was a betting man I would say you absolutely could replace it these are expensive sprayers and there's no reason why you shouldn't be able to replace the spray wand. I'm sure it's the entire thing. Here you go. Just screws in diypestcontrol.com/bg-120-valve-9-extension-extenda-ban-multi-jet-tip I'm sure you could also rig something up but you would have to buy a 9-inch tube along with the nine inch white nylon cable. Here www.solutionsstores.com/vc-152-valve-cable-9-22045300#156=966

@bernie4366

4 ай бұрын

@@Samlol23_drrich Thanks Sam, I'll be looking into it this afternoon. I just bought a B&G 'Jumbo' carrying case, and it won't carry a sprayer with an 18 inch wand. Really annoying. I know you can buy the whole 9" assembly including the extenda-ban, I was trying to find a way to just buy the pipe.

@Samlol23_drrich

4 ай бұрын

@bernie4366 it looks to me like you absolutely can buy all the parts and put it together yourself. Go to the b&g catalog and get the part numbers and im sure you can find them. I'd say just the metal wand and nylon line. Everything else should be able to be swapped

@Samlol23_drrich

4 ай бұрын

@bernie4366 here you go. 39 page repair manual. Should have all the part numbers. Looks like all extend a ban valves are the same except for the wand length. You need a VE154 and VC152 . The cable is 9" and the wand is 8" but they go together. Each part is about $35 so your looking at around $70 but definitely doable. Good luck. images.app.goo.gl/oMfUB2yr6tvFpgdm8

@bernie4366

4 ай бұрын

@@Samlol23_drrich Thanks Sam, appreciate you bro.