These Videos are great, I picked up a used mini GS and the eyes were caked in paint. I knew what to do and how to fix it and I got a nice mini with two piece barrel for $250! 😁 thank you Rory for your videos!

@zackzittel7683

Жыл бұрын

I just bought a mini for $150 that had a leak down the barrel, they had the wrong O-ring on the poppet valve body (should be a #13) idk what size the older one was because it seemed stretched out (bigger in diameter but smaller in thicKness) shoots great and a cheap grab for the collection.

Fun to watch! It'd be cool if there were more like this.

This was a very informal video. I just bought a used KP3 so this might come in handy.

@CoilBoyRunning

2 жыл бұрын

Trust me it will, if you haven’t ran into the problem yet, you eventually will. I had about 3 full days of play till it finally blew.

This was a novice mistake I made on one of my first speedball guns, that I'm sure lots of players make: if you increase the pressure input of your regulator and then try to turn it back down without shooting the air out of the gun, the regulator seat has nowhere to go because the air pressure is pushing the piston against it. You'll only end up damaging your reg seat.

@HalfbreedTrini

2 жыл бұрын

Thanks for the tip☺️

Another thing to remember is to fire it after degassing. I have 2 kp3s and the newer one purges but the older one does not. I destroyed a ref seat because it doesn't and had to bring it down from 330fps. The pressure blew the seat out. So degas and clear the ref before any big changes in reg pressure. Both run great now.

I ordered a kpc+ 2 years ago and stuff happened to where I couldn’t go paint balling so went to make sure everything was greased and good on mine and the dang reg screw was jammed and wouldn’t go either way it was clear out from factory and so tight that trying to get it to go in and it stripped why tf did they use an all brass part and jam it out like that given it’s a different reg than in this video but taking it apart to get the adjuster out to replace when a new one comes in my puck was also bad so thanks for helping me no be dumb struck at the reg pinning wide open after I get it fixed

OK so YOU CAN open up the regulator adjuster and replace just the regulator seat! This is good news. I just bought a mint condition white/purple KP3 off ebay and I cannot get it to shoot under 440 fps. Now I know why and I'm guessing that's why I got it dirt cheap lol. Thanks for this video. I'm going to replace it myself.

YESSSSSSSSSSSS

haha that happened to one of my loaner guns.

Would this regulator be the same as the original kp pump?

Did they discontinue these pumps? I’ve been looking everywhere and I cant find any for sale and if I do it’s only in one color.

These videos would be better if you aired up the marker and showed the issue first, then fixed it. You just start working on them without replicating the problem.

fix your customer service

@mreogromsdal415

2 жыл бұрын

you never will loltroll

@boppernostopper8598

2 жыл бұрын

@@mreogromsdal415 actually I Do, ANSgear are greedy fucks

@oxnard8054

2 жыл бұрын

@@boppernostopper8598 why do you say that ? I had a similar experience