Should not have broken. Took it back and they took care of it without charging me.
Жүктеу.....
Пікірлер: 24
@d-unit-outdoors Жыл бұрын
Why is he so choppy on the throttle, is he in 4L? Isn’t the goal to lock them up and crawl?
@papa543212 жыл бұрын
almost killled his friend at the front geez dude
@adamsearle48232 жыл бұрын
Don’t worry its a jeep thing….😝
@Colorado4x43 жыл бұрын
Dang. Yea it didn’t look like it should have broken!!!
@andreuasencios3620 Жыл бұрын
Yeah buddy, light weight baby!!
@gotjunkin14016 жыл бұрын
IT MADE PARTY AT BREAK😂😂😂😂
@3smoke2 жыл бұрын
I'm surprised you broke a Chromoly axle that easy. Unless the passenger side front was more bound up than you can see from this angle. Even with 37's it looks like it broke too easy.
@erich21867 жыл бұрын
Looks like John Bull Gatekeeper. Was that your stock axle shaft ? Assuming you were locked up from it didn't look like you were torquing on it too hard. And lastly how did you get off the mountain after that ?
@johnsomething1178
7 жыл бұрын
Yeah, GateKeeper. No, they were chromoly shafts but it was only a D30 with 37" tires. Still shouldn't have broken on that, though. I have since upgraded to a PR44 with 35 spline RCVs. But I still climbed the mountain! I still completed the rest of John Bull to the end without any winching! Just some patience and really good spotting from friends. Three-wheel drive all the way up! :)
@yerwrng
6 жыл бұрын
John Something Can't believe they put a d30 in a Jeep as big as a 4dr JK.
@gustafpeyron
2 жыл бұрын
@@johnsomething1178 you continued driving without taking the broken shaft out?
@johnsomething1178
2 жыл бұрын
@@gustafpeyron yup! No biggie.
@gustafpeyron
2 жыл бұрын
@@johnsomething1178 dang well that makes me more comfortable if I ever break a shaft. It's such a pita
@brandonm18812 жыл бұрын
That was weak, must have sucked to get out
@alersjjoutdoors65263 жыл бұрын
I just did the same thing today 🤦🏻♂️
@TheWunder
2 жыл бұрын
Sorry for your loss
@Jo_Nthejeep Жыл бұрын
If you’re running 35s stick axle should be ok but 37and up always beef up your axle with some c gussets for the knuckles and axle truss.
@truckcampertraveler7369
11 ай бұрын
What does that have to do with an axle shaft?
@jamazonnewyork3221 Жыл бұрын
thats what happens when you put big tires on a jeep
@khalildalak81763 жыл бұрын
Why did it break? Did he do something wrong ?
@SkyBlueOffRoad
3 жыл бұрын
Yeah...lockers were not needed in this situation in reverse and it is a dana 30 with big tires...not much was right in this situation.
@kg0311
2 жыл бұрын
@@SkyBlueOffRoad weight all on one side etc, easy mistake though
Пікірлер: 24
Why is he so choppy on the throttle, is he in 4L? Isn’t the goal to lock them up and crawl?
almost killled his friend at the front geez dude
Don’t worry its a jeep thing….😝
Dang. Yea it didn’t look like it should have broken!!!
Yeah buddy, light weight baby!!
IT MADE PARTY AT BREAK😂😂😂😂
I'm surprised you broke a Chromoly axle that easy. Unless the passenger side front was more bound up than you can see from this angle. Even with 37's it looks like it broke too easy.
Looks like John Bull Gatekeeper. Was that your stock axle shaft ? Assuming you were locked up from it didn't look like you were torquing on it too hard. And lastly how did you get off the mountain after that ?
@johnsomething1178
7 жыл бұрын
Yeah, GateKeeper. No, they were chromoly shafts but it was only a D30 with 37" tires. Still shouldn't have broken on that, though. I have since upgraded to a PR44 with 35 spline RCVs. But I still climbed the mountain! I still completed the rest of John Bull to the end without any winching! Just some patience and really good spotting from friends. Three-wheel drive all the way up! :)
@yerwrng
6 жыл бұрын
John Something Can't believe they put a d30 in a Jeep as big as a 4dr JK.
@gustafpeyron
2 жыл бұрын
@@johnsomething1178 you continued driving without taking the broken shaft out?
@johnsomething1178
2 жыл бұрын
@@gustafpeyron yup! No biggie.
@gustafpeyron
2 жыл бұрын
@@johnsomething1178 dang well that makes me more comfortable if I ever break a shaft. It's such a pita
That was weak, must have sucked to get out
I just did the same thing today 🤦🏻♂️
@TheWunder
2 жыл бұрын
Sorry for your loss
If you’re running 35s stick axle should be ok but 37and up always beef up your axle with some c gussets for the knuckles and axle truss.
@truckcampertraveler7369
11 ай бұрын
What does that have to do with an axle shaft?
thats what happens when you put big tires on a jeep
Why did it break? Did he do something wrong ?
@SkyBlueOffRoad
3 жыл бұрын
Yeah...lockers were not needed in this situation in reverse and it is a dana 30 with big tires...not much was right in this situation.
@kg0311
2 жыл бұрын
@@SkyBlueOffRoad weight all on one side etc, easy mistake though
This looks boring.