Love seeing the Mighty Handy Tool put to work! This really is a solid 1/24 offering, fun and capable.

@rcdriver

Жыл бұрын

The Mighty Handy tool is, well, mighty handy! 😆

Very well done video Greg. This is a very interesting platform. I'm really enjoying it. Those knuckles looked beefy with all that brass. Thanks for the shoutout.

I'd love to see ax24 vs fcx24!

The weight should definitely make that little guy better. Great information as always!!

I just picked my AX24 yesterday, and I threw on the SSD Wheels with brass rings. My favorite feature is the Four Wheel steering. Seeing that you're putting brass servo mounts on makes sense to me. I can't wait to do some competitions with my rig. I love your review!

I'm probably going to get one in a month or two. Those are perfect upgrades for it. Thanks for the informative and cool video.

Back in the day , I had the original AX-10 , flip the shocks upside down , & turn the steering servos around for behind the axle steering ......this will give you more weigt down low without sacrificing grond clearence & give you more clearence at the axle ,ie rocks hitting steering link , . If you run springs do firm in the rear , it will still flex , but it will climb 100% better & eliminate torque twist when climbing , run medium springs up front this will keep it from rolling on steep desents , Also cut each tread block in half so it's like spreading apart from itself like fingers way more grip , that's my 2 cents worth of knowledge for you , have fun !

WoW! Great up-grades and Mods!!! Thks for the info share!

Great video. Can’t wait for it to arrive in the UK

Great looking parts. Nice review

The worst thing on it are the shocks. They're just plain awful. Second is the motor. I fixed the shocks by combining some parts from a set of Hot Racing SCX24 shocks I had in the drawer with the stockers. They no longer "jiggle and it's much more stable. I also added SCX24 front "disc brake" weights along with some Treal wheels with heavy rings, and some Injora 64mm "Rock" tires that are pretty darn sticky. I also added Treal front steering links, which tightened things up nicely. Tomorrow, more parts arrive.. two new Emax servos with Treal servo mounts, another set of steering links for the rear, a Treal skid, Treal knuckles, and some overdrive gearing for the front diff. Next week sometime, the big one arrives -- a Furitek Micro Komodo and Lizard Pro setup, and an FS-BS6 receiver so I can control the rear steering properly. So far, this thing is pulling off (or nearly pulling off in some cases) lines that my UTB18 Capra and some of my 1/10 scale rigs have done. Most SCX24 parts work on this thing so no need to spend $$$$ on Axial's stuff or if those parts aren't in stock.

I was always curious as why Axial didn't offer upgrades for the SCX24 platform, interesting to see them rolling out a range of option parts for the AX24.

Wow, that's impressive for the scale, hope they turn out a pro or platinum edition so I don't have to wrench, LOL, maybe save a few bucks too :) Thanks for the awesome content Greg!

Lower control arm nuts are such a pain to find locally. Axial doesn't have the super tiny nut size or sell them as replacement parts. The only part with those micro tiny nuts is the Chassis Set for the AX24. Axial part number - AXI201004.

I would like to see a before and after upgrade test. Great vid anyway

This 4WS thing has got me interested.

You’re gonna need to upgrade those servos the second you put any weight on it. I’ve been running the stock motor for a while though, honestly not bad at all.

Great upgrades. Unfortunately the customers in Europe have to wait around two weeks for their cars.

He's trying to right man if you think about it it don't matter where you buy the Dank on Parts I just thought about that it's about how much fun he's having with that right now cuz I bought a lot of my parts like $800 worth at the RC shop but I could buy all that other stuff online so much cheaper the way I thought is if I spend my money at the RC shop it keeps the RC shop open for when I want to look at something I can't I can't touch it I can feel it see it great review by awesome see people having fun

Still on the fence about getting one... Wish they made 1/18 or 1/16

Great video ,as usual, but I have one question, do you think you could put a furitek stinger in the AX24?

@rcdriver

Жыл бұрын

Good question, but i’m not 100% sure if you can. I don’t have that system. I have the 1400kv Komodo on the Stellar trans and that “looks” like it would have fitment issues.

I really like it , I mean who else is making a rear steer rock buggy with loads of flex in 24th scale ?

These 1/18 / 1/24 Credit Card Crawlers "tm" should be offered as RTR/ KIT and "RTM" or ready to mod." Its a really nice box thats empty and inside is a parts diagram/ exploded view and a list of all the places you can get "upgrades."

Hi RC Drive…. Have seen many video’s on your Channel , but why dont you have anything about the HPI Vorza Flux… Nobody in the US are talking about it….. 😮

What do you do for a living

Not for nothing but I've had my XC1 for a little over a week and yes it did roll over allot, I mean a dirty look and there it goes on its side but I gotta say that with all the practice I've been getting it doesn't roll over on me as much any more its doing great and I didn't have to give Axial any more of my money. I mean after all getting a great price on something means just that I not going to spend a dime on modifications to get it to do what its supposed to do out the box, anyway I'm really liking this truck.

Hope u got a big old motor also haha ohhh what my servosssssss lol

@rcdriver

Жыл бұрын

6:36

@rcjoe406

Жыл бұрын

@@rcdriver cool more power always better..I run the holmes hobby 66t with stock v2 electronics its a perfect budget build 👌

Not saying it’s bad but is it a 300$ RC no it’s not. Out of the releases from Axial I think this one is going to not do as well. I’d rather invest my money in my 1:18 scale Capra.

first ❤

I just got mine an hour ago and ran it. I see nothing on it that is any good. I see nothing from it that is any good. It's not even good as a collection of spare parts as I would not reuse a single part on it. I think I will take the driveshafts off and give it to my 2 year old grandson as a push toy.

Are you really promoting the brass parts by axial? All of them is except the skid are not worth the money whatsoever, they're a rip off for the price. Promote injora or something

@mickd8188

Жыл бұрын

The only rip-off is Injora.. just another Chinese company ripping off legitimate companies intellectual property without doing any development or putting on cool events like Axialfest. I get it... they're cheap parts, but they do no product research or development, just simply copy mainstream brands with no care and are mostly inferior quality. The only reason they exist is because people want to nickel and dime and there is no way of legal prosecution.. Support the companies that support your hobby. Cheers

@wootwootjr

Жыл бұрын

@@mickd8188 meh. Cheaper is better on my wallet. $25 for their knuckles that don't even weigh as much as a pair from treal. No thanks

@rcdriver

Жыл бұрын

I’m still hoping that some day people realize that other people buy RC cars and parts simply… because they want to. It’s really that simple. If something is too expensive in your opinion, fine, great. But not everyone is that way.

@zeke_the_nugget

Жыл бұрын

@@rcdriver honestly people need to leave their negative comments to themselves

@cmoney360CS

Жыл бұрын

I don’t care about a cheaper one weighing 1g more. The price to me is minor and I will most likely be getting the axial ones. Glad I can see what they look like considering they are sold out everywhere. I did just buy some injora parts for my trx 4m though

Oof. $160 rc with $150 in upgrades? All these small scale RCs have the same issue, CG is always terrible, shocks are never any good, and the motor is always too weak. The rig needs weight to fix the CG than the motor can no longer handle the weight. Another disappointment.

@christhecieraguy1388

5 ай бұрын

I just bought an AX24, and will spend Far Less on total upgrades than those that do 1:18 scale. Partially because the parts in general are cheaper (mainly because of the size difference), and also because I'm not looking to compete. All-in, I'll be in it at ~$350, which is a Fraction of the cost that most people spend on their 1:18 rig. But to me, they're all super fun!!

Love my @ccxrc MHT

So what about just adding a $2 fishing weight to the stock version?

@CCxRC

Жыл бұрын

You can add inexpensive stick on weights they use for balancing car wheels. Most hobby shops sell them. We stick them on the tops of the servos for weight below the suspension. Very inexpensive way to get a little performance boost.

Half the time ⏲ 😌 I can't tell if it is coming or going 🤔 😅 😕