I have those 3157 auxito switchbacks on my family’s 2017 Toyota sienna LE. These switchbacks are amazing. And I love the built in cooking fan, that’s gonna help last a little longer. I have the AUXITO 7440 LED Bulbs Amber Yellow 3000k 48w for Turn Signal Lights with Build-in Load Resistor CANBUS Error Free for my 2015 lifted Scion xB. The way it’s position away from my reflectors. It’s using my side mirror reflector for to create a side by side beam pattern to give a much better alert to other drivers, and I love the 1500k. What a strong amber orange color. After few months they got burned out or got defective, and got two new pairs. But I have a hunch that I feel like I should change then again, to 7440 Amber Yellow LED Turn Signal Bulb With Built in Resistor CANBUS Error Free that has a built in cooling fan like on the video. I think those are better for with the cooling fan. 🤘🏼🤘🏼🤘🏼🤘🏼 Now it’s 2200k that’s still got a strong Amber orange that’s great. And it still got 28.8 watts per bulb. What I find it funny, is those cooking fan turn signal led bulbs for 3157 switchback makes 4200 lumens. Which I honestly think that’s kinda overkill for that much lumens. I would say 2800 lumens. Since it’s 28 watts. For 7440, it’s down to 900 lumens. Which that’s kinda odd, why 7440 makes 900 and 3157 makes 4200 lumens which I think it’s more 2800 lumens?? I have no clue. So I’m thinking, maybe there would be my next switching from my current auxito led to another one with a built in cooling fan that’s a bit more efficient.

@AUXITOLED

9 ай бұрын

Thanks for your sharing. In addition, the bulbs you are talking about are from two different series and models. It is normal that the parameters will be different.

Do these have the built-in resistors to prevent hyper flashing?

I have the 7443 and the white led will flicker then light up slowly does anyone else have that problem I’m thinking about returning them

Also it’s incandescent amber bulb. Ur low/high beam lights are halogen. Just FYI.

@moparlifescatpack

9 ай бұрын

Thanks for clarifying that…I actually didn’t even realize that! 😎

@AUXITOLED

9 ай бұрын

👍👍👍

@toyotabrony

9 ай бұрын

@@moparlifescatpack not a problem 🤘🏼

@toyotabrony

9 ай бұрын

@@AUXITOLED 🤘🏼🤘🏼

@lpatierno84

4 ай бұрын

Kinda like the amber all the time personally

Do they hyper flash when you leave them on for more than 5 minutes?

@AUXITOLED

9 ай бұрын

These turn signal light bulbs with a built-in resistor and high decoding rate, which can resolve the issue of occurrence of hyperflash.

@SolbladeX

9 ай бұрын

@@AUXITOLED do these over heat? Because I had some before that would over heat because of how bright they are and would even eventually hyperflash to cool down then go back to normal when they cool down.

@toyotabrony

3 ай бұрын

When u leave them on for more than 5 minutes. No they will not. With built in resistor, cooling fan, and they update the decoding time. Which means they increase the time more before it gets hyperflash.

@b544

Ай бұрын

They do hyperflash after the DRL's have been on for 5 or 10 minutes. If you don't use DRL, they are okay. I have them installed in a second generation Sequoia - like the one in this video. Annoyed with the problem and don't want to add another resister. Thought these would avoid that problem based on the way their marketing seemed to suggest it would..

@toyotabrony

Ай бұрын

@@b544 that I can agree. I think that’s probably why it draws more heat for drl. 5.5W for white led drl is powerful. So I know they draw heat pretty intense. But with 28.8W for turn signals. They can get even hotter. For good 5-10 minutes. They kinda do get hyperflash. But that’s just the nature of automotive led lights. Unless it’s a lower wattage. Like 3W white led drl, and 7.5W amber turn signals. Won’t have that problem. And if ur vehicle are sensitive system like Dodge or VW, I would definitely add resistor. There’s a plug and play u can looking from alla lighting for $30. And they are much better. It’s only made for standard socket type. So if u got room for the tail lights. Great. But if not, and if ur front turn signals have CK, well traditional resistors with T-tabs are ur good options. If it’s not a CK for the front. Ur in luck.

I literally need a set. Can I get a pair for free? I have no money 😢

@AUXITOLED

9 ай бұрын

Oh no unfortunately to tell you that i'm unable to do that.But maybe you can try to do partnership with our brand. Pls reach to our promotion manager directly : @auxitobill

@Lucas-jb6re

9 ай бұрын

That’s frustrating…😢

@toyotabrony

3 ай бұрын

@@Lucas-jb6renot really. That’s a big benefit. Give it a shot.