Why don't you show the part you need to cut out behind to allow them clearance to actually fit properly cause I'd like to know how you done it have same truck just no room behind

After getting tired of people flashing me to turn down my low beams & a couple “official warnings” I found the stock housing really not intended for that type light. BUT I did end up with a super set of lights that I’m more than pleased with and doesn’t blind the oncoming traffic. It’s a set of spyder projector with audew 360 led.

How was the light output on the road? I've found LEDs to be plenty bright, but do not do a great job of projecting the light on the roadway.

how do they work? I didnt like my hids because they keep burning out! I also couldnt see as good as the halogens. Can you see good in the rain fog or even just at night in regular weater

Whats that box called that the leds plug into. Mine dident come with it and there not working

Have you had a problem with the head from the bulbs and the plastic melting? I’ve wanted to buy some less for my Chevy but I’m nervous the heat will met the plastic

I have a question did those led headlights fit properly and the headlight unit close properly?

I like how you skipped the part where you got them to actually fit. I bought some for an 05. I would have to drastically modify the the frame behind the the light housing. I’m not willing to chop up my truck for them!

@MuddyCowboy91

6 жыл бұрын

I got an 03 an I had the same issue..

@sliceoflife2739

6 жыл бұрын

Same truck as him 07 lbz and I had to buy metal hole saw for the install

@vinson03

5 жыл бұрын

Agreed how the F%#k did you get them to fit looks like need to cut metal get them in there's absolutely no room too bad he left that part out now I have light's I cannot use GRRR

Is it possible to aim an adjust the low beam lights

Did you need load resistors for these? I know people use them on blinkers but I wasn’t sure about headlights

I bought the hi/ lo beam set and only the lo fit, and still had to whole saw a part of the headlight housing bracket.

Did you have to do anything else for your fog lights to turn on? I installed mine on 2003 tundra and my fog lights will not work.

hid lights were good but they didn't like cold weather and so I would randomly have a light go out on my way to work which is about an hour drive to our shop.. the HID would get to a certain temp and just go out and not come on until I pulled over and let it warm up again, really annoying so I'm glad LED lights finally became main stream and good

i know the classic take the 9005 and 9006 for low and high beam, why did you get the h11?

@sean.g4516

2 жыл бұрын

Same thing I wanna know

My led headlight were a tight fit as well. But they look great! It took a bit to get it fitted in. I'm going to mess with it tomorrow and see if I can't take a put of the plastic out and fit it better. Great video! Honestly I was wondering if other people had the same problem too!

@TruckMaster

7 жыл бұрын

+ShortyChevy04 I'm sure we all had the same problem with clearance but it really dose fit good.

@BowyerToBe

7 жыл бұрын

Truck Master they did fit good just worried about stuff touching the back of it.

@vinson03

5 жыл бұрын

Mine won't fit as well without cutting the assembly help out if you can

i thought the silverado is 9005 and 9006 bulbs..? why did you get h11?

Did you do any modifications, cutting for it to fit in?

Are those light bright do they last long?

great video im subscribing! i have hids on my lows and fogs thinking about getting a pair for my high beams to compare them

@TruckMaster

7 жыл бұрын

+jeffrey aguilar that's a great idea, I had hids in the past and I must say the LED is the way to go but thanks for your support

Is it the H11 or H1 link states its the H1 you state they're the H11 so confused 06 Chevy Duramax

So if Anyones watching you don't have to cut anything they clear with out cutting I have a 2005 Silverado 1500 and they cleared with no issues

did you have to adjust your headlights

If you want to change your housing to a projector set up go with hid because they are brighter hands down, stock housing led are brighter, do not buy hid for a halogen housing they are not made for that and will not look bright on the road and will blind people

for hids and leds you need projector housings

We need a stealth vicious So I can install one

I just bought a one owner 160k mile 03 ext cab LS. the owner, luckily, was a big believer in regular fluid changes. other than that, really not much besides brake work has been done to the truck. so, there's a lot of stuff i can improve immediately. looking at the headlights however i thought no way can that fan to fit bw the headlight assy and the frame. in the video, it looks like the one closer to the radiator is really squeezed in there and even looks like it at a bit of an angle bc of it. can you tell me if you had beam adjustment issues bc the fan was wedged against that crossbar? thanks

@TruckMaster

7 жыл бұрын

+J.S. Reilly it was very tight but it fit and I didn't have any issues the lights sat level as well but maybe if you cut into the plastic behind the head lamps it should fit perfect

Nice brush guard where did you buy that one at?

What's the difference in h1 and h11

Love your videos and thanks for your service. I have an 06 LBZ and my housings are very scratched and pitted so I want to upgrade. I understand a projector housing is preferred vs the stock reflector housing so you don't blind people or get a ticket. It looks like you installed these in your stock housings ? Do you know where I can get a quality housing with a projecter for the main and a reflector for the high's ?

@TruckMaster

7 жыл бұрын

+Tony Bieker I really don't know I might have to do some research I would like to know as well but that's for the support take care

I have a 06 1500 and i was intrested in these lights for low and high beam my truck isnt lift but is on 33s, i was wondering do i have to order a specific set for them to fit my lights or are they one size fits all

So I did order this LEDs for my 03 1500 Silverado. It did say it matches my truck but The connections didn't match. And the led is to long for the casing

@TruckMaster

7 жыл бұрын

+philip martinez that's not cool email that company and ask for your money back not sure but 1500 and the 2500 might have different connections

First off...thank you for your service to our Country! Second, did you do a "how to" on the install of the marker lights on top of your rig?

@TruckMaster

7 жыл бұрын

+Sam Peterson thanks! And no I didn't but I plan on smoking them black soon and doing a video

@sampeterson1595

7 жыл бұрын

Your welcome! I'm a Veteran as well! I have a 2016 LML and want to put those on mine! Did you install yours yourself? How hard was it?

@TruckMaster

7 жыл бұрын

+Sam Peterson well thanks for your service as well, the cab lights came stock so I'm not sure how to install those but check out some more videos on KZread I'm sure there is one out there good luck sir

I bought a full set of LED headlight bulbs for my 05 Sierra HD, and one of low beams just went out about week ago. They've only been in the truck for a year. So disappointed with the life of them. However they were not auxbeam brand. But still spent $55 - $65 for each pair. Hopefully your auxbeams last longer than a year. I might go back to HIDs in my truck

@TruckMaster

7 жыл бұрын

+John Nordbye it's your call I really didn't like them because they were to bright especially with a lifted truck I was blinding drivers passing me

@AgentWK

7 жыл бұрын

Truck Master How was the light output behind the wheel. Was it noticeably better?

@TruckMaster

7 жыл бұрын

Agent WK I didn't have any light shining outside of the wheels but the head lights were bright

I'm trying to decide whether to go with LEDs or HIDs but I like LEDs better, but did you use the h11 for all four or what? Or would I need the 9005 or 9006 package?

@MrZACATECANO100

6 жыл бұрын

Damon Dominguez leds bro hids ballast go out with time bulbs too.

F16’s are Awesome 😎 on my Dodge CUMMINS

I'm looking to do the same lights on my 2004 1500. I tried one brand but they wouldn't work unless you did some modifying. Did you have any issues or was this a pretty simple install?

@natashawitt3466

6 жыл бұрын

I have a 2004. I used a dremel tool and cut the opening a bit larger.

now that you have had them on the truck for 2 months, any issues at all? Flicker, passing motorists flashing, lights at you, etc.

@TruckMaster

7 жыл бұрын

+Paul the Wxguru great questions I plan on making another video on that. I have had people flash there lights at me already I think this is a great think for the hi beams but I might switch out the low beams now

@isaacaleman1342

6 жыл бұрын

Why would you switch out the low beams? They don't meet your expectations? People can high beam you cause maybe you need to adjust the headlights.

@lipsfan72

6 жыл бұрын

I like how you skipped the part where you got them to actually fit. I bought some for an 05. I would have to drastically modify the the frame behind the the light housing. I’m not willing to chop up my truck for them!

@mlangfordcamper

5 жыл бұрын

@@isaacaleman1342 I think this is to blind people, we often use this as a reason to pull people over for a meet and greet.

looks good. have you seen the '15 tow mirrors (with LEDs) available on ebay now for your model truck?

@TruckMaster

7 жыл бұрын

+DRT71 no but now that you said that I'm checking it out. I've been thinking about changing out my mirrors

Perfect look with this headlights. 🖒Have the same Truck here in Germany. But... we cant drive LED bulbs like this in this damn Country. Its absolutly Not legal. I like it. God Bless america.

@TruckMaster

6 жыл бұрын

+GS Intrepid that's not cool glad you like it though take care and God Bless as well

the brand light I bought will not fit because they hit the plastic behind the headlight

@TruckMaster

7 жыл бұрын

+Jordan Turner mine comes close but you could melt the plastic back some or cut it down to fit it's your call

How is the beam pattern.sure the color is nice. But performance is what I need.

@mrdirtwork6673

3 жыл бұрын

Thats what I'm looking for as well

@firstlast-cx8xq

3 жыл бұрын

@@mrdirtwork6673 I bought 2 brands to test. The Hikari Ultra, in a white box. And I think the Auxbeam, and hands down the Ultras were better. But They are like $90, b/c they are definitely more powerful. The beam pattern really relays more on your headlight housing. But it’s not a bad pattern.

Did one package come with both high beams and low beams?

@paint3ball

6 жыл бұрын

Connor Linnenbrink yes

Ya man I want the same lights! Nice truck to, I have the identical truck, 07 Silverado, black as well.... I have HIDs right now, I hate the fact that the HIDs take so long to turn on especially when I want the high beams on!

@TruckMaster

7 жыл бұрын

+Maxx Power thanks man, and your not kidding about those HID's

@maxxpower8961

7 жыл бұрын

Truck Master I am very frustrated, I finally ordered a set of lights for my Silverado from Auxbeam, never got them, delivery company I guess lost my order and they don't have a answer, Auxbeam aren't seem to be helping either. I hope I get my money back

@TruckMaster

7 жыл бұрын

Maxx Power that's not cool man see if they have a tracking number

@maxxpower8961

7 жыл бұрын

Truck Master I have a tracking number, been watching it leaving terminal then arrive at terminal for a month! And yet nobody seems to have a answer why! Lol.... very frustrating I hope I get my money back, Auxbeam lost my business, il buy somewhere else. Great videos by the way, thanks for the reply. I have to vent!!!

@iwuzheree

7 жыл бұрын

Maxx Power you should try OPT7 led headlights,i ordered mine on amazon.they even give you a 2 year warranty.

The link in your description took me to the wrong bulbs...

i called auto parts they said my bulbs are h11 and 9005. I also clicked on the link and the description said f16 h1 bulb which set up do i need my truck is the same year and same body style

@TruckMaster

6 жыл бұрын

+ben hooper honestly man cant remember it was so long ago but these lights are to bright I took them out I suggest you find a different type

@sean.g4516

3 жыл бұрын

@@TruckMaster which were too bright the high or low?

@sean.g4516

2 жыл бұрын

@@TruckMaster so what kind did you switch to??

Are these 6000k or 6500k?

Next time do the brightest test with the lights you just bought and drive around to show how much the street gets lit up

@TruckMaster

7 жыл бұрын

+Spider Stillz thanks for the idea I will post a new video on it tomorrow

how are they holding up so far interested in getting a set

@TruckMaster

7 жыл бұрын

+Travis Williams they hold up great

These do not fit on my truck. 2006 2500hd crew cab.

@geekt

6 жыл бұрын

Same with my 06, not enough room for light fan behind the light housing, does not fit.

Does the light shine far with the leds?

@TruckMaster

7 жыл бұрын

+Yamaha Rider not really far but wider

@MrZACATECANO100

6 жыл бұрын

Mines do

@sean.g4516

2 жыл бұрын

@@MrZACATECANO100 what kind do you have?

I’d like to note that the solution to a foggy headlight is NOT buying a brighter bulb

This dude is prior service

@TruckMaster

7 жыл бұрын

+Tyler Jones actually I'm still in

@ajhartzell7689

7 жыл бұрын

recognized the tan under shirt lol. Knew right away your prior service. I hated wearing those shirts. Are you a dealer for Auxbeam, I am from Buffalo, Ny

@sean.g4516

2 жыл бұрын

@@TruckMaster are they adjustable, to aim the beam pattern the right way ?

"ridiculously huge module box" aka ballast

Hey bud, did you buy the H1 lights or H3s?

@TruckMaster

6 жыл бұрын

+zeroskater720 H1s

@zeroskater720

6 жыл бұрын

What’s the difference?

how much lift does your truck have

@TruckMaster

7 жыл бұрын

+clinton pearson 6inch

@brandonboyd2046

7 жыл бұрын

Hey Truck Master what brand are those and how much are they? Also, how much brighter are they?

@TruckMaster

7 жыл бұрын

+Brandon Boyd AUXBEAM, $50 or so dollars and they are twice as bright

@brandonboyd2046

7 жыл бұрын

Truck Master thank you! Also if you don't mind, where and how did you dump your pvc rerout

@TruckMaster

7 жыл бұрын

+Brandon Boyd I routed booth of them through the inner fenders on both sides

want a 6hi module kit?

@TruckMaster

6 жыл бұрын

+Travis R. Not sure I’m still debating on one

@Reaglesracing44_

6 жыл бұрын

Truck Master i had one in my 06 and it was worth it!! i can’t use it in my 12 lml

How the fuck did you do any trimming?