Dude that burb is clean as fuck… you must be it west? Squares in ohio dont have floors let alone rockers or the bottom 6” of the doors! 😂

great video bro. very helpful. did you use the pan gasket that came with the duralast filter kit?

The Sensor doubles as an transmission drain plug THANKS

4l80e and 4l60e both have a trans temp sending unit hole on them on the drivers side on the front of the transmission. it wouldve saved a lot of trouble to just take the plug bolt out and put a sending unit in there instead of tapping into the pan.

@richsipe

6 жыл бұрын

Starting in 1996/7 ...

Yes, the gauge and sender was all in one package.

Nice video. Where did you get the bolt in adapter for the temperature sending unit?

Hey - good video, very useful for my plans to install the same auto meter trans temp-sensor/gauge in the oil pan of my cherokee xj 4.0. You did not weld the Hayden Adapter screw on to the oil pan, just bolted this down. Does this stay connected/fixed all the time without leaking ?? Thanks.

@gpaulwooden6576

9 жыл бұрын

Hi there. For the few months (3 or 4?) I had this pan mounted, nope it didn't leak. After posting this video, I noticed other videos that more focused on the drain installation that had folks welding it in. I guess I got lucky - maybe over time it would have? I have since changed out the stock pan for a MagHytec deep aluminum one - from which already had provisions for the temperature sender.

@johannesvizethum

9 жыл бұрын

***** thanks - I'll try it the way you've done…..

Dir that gauge come with the mount setup in the pan ??? Or is that another part ???

good job bro. but it is not the correct spot to mount the sensor. it will not a accurate for that spot.

What size tire and rims are on your suburban?

Extension????

What does your trans temp run at ????? Ever get hot pulling or anything

@gpaulwooden6576

7 жыл бұрын

Hottest it has ever gotten was 150. Towing in the middle of the summer.