Greeting from Auckland . Thank you for the Educational Video, I have few of Level5 tools including the Bazooka I will continue to see more help from your site.

@frankwieczorek5112

2 жыл бұрын

Hi Emmanuel, I live in Westport, where have you got your level 5 tools from?

@emmanuelola9939

2 жыл бұрын

Hello. I bought them from Ebay . Sometime direct from Level5 web site then sent to me here . I don't think we have distributor of Level5 in NZ

@frankwieczorek5112

2 жыл бұрын

Thanks mate

3:42 "now as you can see we're a little high" Well, we are drywallers, aren't we? 😄

Fantastic. This surely makes things a lot easier and faster as corners has always been the most tedious part of taping. I ended up here because I was just looking at these on Amazon and thinking of buying this tool.

That’s nice, it saves so much time. Congratulations

those tools was gorgeous

Im so glad i spent 10 years perfecting the old school way, remember that? Hawk and trowel, running tape by hand? Im such an idiot. Lol these tools do look awesome cant wait to try it

@dangerdiesel3106

2 жыл бұрын

Seriously this is soo much faster, im really impressed

@LEVEL5Tools

2 жыл бұрын

Let us know if you have any questions! Welcome to the world of Automatic Taping Tools 👊

That ceiling height is what finishers dream about at night 😂

Thanks for these videos.

@LEVEL5Tools

4 жыл бұрын

Our pleasure! Glad we can help out.

@drywallnation

4 жыл бұрын

Glad they're helping!

I have a question does the tape have to be dry to run a box over it can I do that in the same day

How many passes do you need with your inside corners? When doing it manually I usually do 2 passes.

Noticed your using paper tape in the corners and on another video you used fiber fuse on the flats what is your preference and what would you say is better,good informative video thanks new to automatic taping and flat boxes just got my first set thanks in advance

@LEVEL5Tools

2 жыл бұрын

Great question! It's completely up to the preference of the individual finisher. Fibafuse is a little thicker so you would need to push the gooser needle back some to adjust for the extra thickness.

I just got my set of these taper system. It works great and really fast I just have a difficulty to do the ceiling corners, especially at the starting place, the tape just keep falling off before I got to the other side of the corner and it pulls down the whole thing. I know practice will help but do you have any tips? I keep the drag very loose!

@LEVEL5Tools

Жыл бұрын

Please contact our support team at 866.562.4229. They'll get you sorted out!

@mjjackaroos112

Жыл бұрын

Make sure you use the little wheelbto start and hold the tool at 45 degrees

Just got our set of these tools. One question... when do you engage and disengage the springs on the back of the corner finisher? We are newbies so not super familiar with when to do that

@LEVEL5Tools

7 ай бұрын

Hello! Please contact our support team at 866.562.4229. They'll get you sorted out over the phone!

Question : the mud I'm using is normally 90min open, do I have to clean the applicator between filling again

@LEVEL5Tools

2 жыл бұрын

We recommend against using hot mud with our automatic taping tools as it voids the warranty. However, if you do use hot mud then we highly recommend a full clean between each use.

@peterrobbins2862

Жыл бұрын

​@@LEVEL5Toolsthe base coat we use is normally a 60 minute lifespan so the tool would require a complete clean every hour what are you using to on these machines and how long is the drying time before you recoat them . We use two coats of base coat that takes approximately one hour to dry between coats and a topping compound of some sort that requires a day to dry before sanding

buy those tools at amazon? is there have some promo now?

@LEVEL5Tools

3 жыл бұрын

Hi you can find our tools on Amazon here: level5.tools/AmazonStore Follow us on Instagram and facebook for updates on promotions and deals. level5.tools/facebook

what are some of the reasons of the cutter chipping, ive gotten few that keep chipping and I believe that's why my tape keeps getting stuck

@LEVEL5Tools

2 жыл бұрын

Great question! We're wondering if your blade is not in all the way? Or are you using another brand's blades which are a little longer than ours? This would cause the tip the hit the sprocket and break.

@DoctorDrywallLatinoAmerica

2 жыл бұрын

@@LEVEL5Tools im using the one that came with the bazooka and the replacement blades that come in the box. so its brand new, idk if maybe I have to adjust it or something.

@LEVEL5Tools

2 жыл бұрын

Please give our support team a call at 866.562.4229 - they'll get you sorted out!

@gamefleitipon8527

2 жыл бұрын

@@DoctorDrywallLatinoAmerica I’m having the same problem. Did you ever find out what was the issue and how to solve it ?

@DoctorDrywallLatinoAmerica

2 жыл бұрын

@@gamefleitipon8527 yeah, its because we made the cut while moving the taper, so when we wanted to make the cut we stoped the cut, its takes a while to get the mechanics since its all in movement and you Anna go fast, but its just that. stop cut keep going.

After watching this I'm shocked that more drywall guys don't use these tools. It's like everyone is still using a manual screwdriver when there's cordless.

@LEVEL5Tools

4 жыл бұрын

It's all a process! These tools have been around for a while but thanks to R&D in recent years they're better and more reliable than ever. Just like most things, there's a bit of a learning curve. These videos are meant to help finishers learn how to use these tools so that their work can be faster and more profitable.

@deputyja1

3 жыл бұрын

It takes some time to get good with them

@pf5658

Жыл бұрын

Remember to that most average drywall guys probably candy afford these tools too. They are not cheap.

@djdanny121282

6 ай бұрын

$ 3.500