Thank you soo much, I never understood how to make those concentric stepped cylinders until now. That extra over-lapping cicle is the key, and also those two subtractions. You made my day, Sir !!

Great video, was wondering how to make stress analysis for this or similar part? I’ve heard can be done using FEM- finite element method. Perhaps you know how to do it ?

Thank you so much for your Tutorial .it Helps me studing AutoCad.

Great Tutrial. Thank you!

Sabeer thank you so much for this!!! I've been struggling so much with my AutoCAD classes and this helped me a lot!!!!

@sabeercad

3 жыл бұрын

Happy to hear 😊👍

@baseej

3 жыл бұрын

@@sabeercad dear sir can u also upload the civil autocad intershalla project? 🙏🙏

Your videos helpful for all questions I had thank you

This channel are very useful with me, keep on sharing your knowledge sir..more power :)

Thank You for your Tutorial. It Helps me studying AutoCad.

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐.

@smtvbyaq7191

3 жыл бұрын

Nicc

Mr. Sabeer, many thanks on a wonderful video, very well done. And thanks for explaining the XPLODE command to separate the polar array into individual units.You are a genious! Have a blessed day.

@sabeercad

5 жыл бұрын

Thank you so much for your Valuable feedback 😍👍 Please Google SabeerCAD and post your feedback about my training in Google business page

@Ami_chavan

2 жыл бұрын

@@sabeercad How did u know the first line was 45 degree the drawings only indicate the radius

I'm am your current student feb21 batch....I'm very happy to have u as my tutor

@sabeercad

2 жыл бұрын

Nice to know :)

Hey man, It works great and without any problems.

Спасибо! Очень хороший урок.

Great information sir👌

Thankyou for explaining.

Thanks For the Solution video of Project of AutoCAD Training.

@sabeercad

5 жыл бұрын

You are welcome :)

thanks sir, very nice tutorial..

Best tutoring Vlog.

Thankyou so much sir

Grt explanation

thanks brother your a proper master

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐..

Thank you sir

This was amazing! Was a little fast paced but I was able to create the part in the example with ease, thank you for sharing!

@sabeercad

2 жыл бұрын

You are welcome

thanks very much :)

Thankyou so much

I'm very thankful for all your Tutorials ...Mr.Sabeer it helps me alot to learn 3d modelling. Now I perform well in my company and give a good output for my tasks... Many thanks again for everything. Jazakallah khair

@sabeercad

5 жыл бұрын

Alhamdu Lillah ! You are most welcome ...

@ummasmi

5 жыл бұрын

SabeerCAD Would you please advise me. How to work in Angles in degrees in 3d Modelling. Sometimes I'm facing issues while working to joining any solid object with one and another if it is in angle

@ramchandru886

5 жыл бұрын

Where r u working bro

Thanks for showing me how to separate arrayed objects

Amazing

Good my friend...

Thank u so much sir for sharing 😍😘

@sabeercad

4 жыл бұрын

You are welcome 😊

Sabeer sir i have learned a lot from you.....sir please help me how can i place my created 3d furniture at correct place in my 3d house which i already made with autocad.....

awsm grt

Wonderful Thnx so much.

@sabeercad

5 жыл бұрын

Thank you so much for your Valuable feedback😍 Please Google SabeerCAD and post your feedback about my training in Google business page with a Star rating 😊

SIR GREAT EXPLAINITION GREAT CONTENT ....

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐.

I love yiu sir thanks

how do i chose the overlapped circle ?

I give you love react on my comment that is my 1st view design and learn by you. thank you.

@sabeercad

5 жыл бұрын

Happy to know 😊 Best wishes 👍👍

amazing video Tq

Please make video on civil drawing with dimensions for practice and upload to your website (fully House)

Wow wow wow ✨ sir you are very great sir💯💯💯

Thank´s FOR YOUR LESSON !! 10000000

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐.

How to play a game in autocad.i already saw that in another video but I am asking to you because your explanation is exellent

thanks for sharing a very expensive knowledge with us.

@sabeercad

3 жыл бұрын

You are Welcome 😊

Thanks sir.. post more tutorials...

@sabeercad

3 жыл бұрын

Will do 👍

Thank u so much sir..

@sabeercad

5 жыл бұрын

You are welcome 😊

Congratulations¡ good explanation.

@sabeercad

4 жыл бұрын

Thank you 😊

Anyone with experience have any laptop recommendations that will run AutoCAD? I'm trying to get something before I go into college as a mechanical engineer.

@bayroncastillo7653

2 жыл бұрын

just focus on 8 gb ram or more ! to me thats enough ,i am working on that

Thank you.. Nice vdo

@sabeercad

4 жыл бұрын

Thank you 👍

Which is 2021 best laptop for auto and and other designing software

How did you select the overlapped circle in 6:06. I'm not able to select this circle

@mohdomerahmed6433

2 жыл бұрын

Same problem

Sir which app to downloading for practice a 3d 2d drawing sir

Very nice

sir i have overlapped radius 14 ,why it is not sleeted for extrude

@rakeshdas3671

3 жыл бұрын

Same question sir?

@shamsheerofficial4712

3 жыл бұрын

go and activate selection cycling in toggle key then you can perform extrution easily

You haven't used any Autodesk Mechanical tool or function for doing this, only AutoCAD tools that were already available in AutoCAD R14 my friend. Even though you have my thumb up.

@sabeercad

4 жыл бұрын

Thank you 😊

How could u did 2nd extrution and subtraction

Sir during the second part of extrude im unable to get what should I suppose to do now. I am unable to get the outer circle as extrude please solve my quarry

at 6:07 how you are selecting the two circles

How are u sir sabeer ..first and foremost I must confess that am one of beneficiary of your online videos. That's y it has prompted me to subscribe to your channel so that I can closely follow u. Just from the above video am unable to trim those circles following what u did. Or something shud be done prior to trimming... Kindly help I want to pefect my skill one day. Am a technician in metal fabrication thank you.

@sabeercad

3 жыл бұрын

Just switch over to wireframe view and try

im facing a problem my four circles that were made with polar array are not extruding. please tell what to do

If I get a job doing AutoCad, who creates those 2D templates. I feel like following a template like that is super easy. I understood the software perfectly, but without a template who's job is it to create the template? (does my question make sense?)

@sabeercad

4 жыл бұрын

You can create a drawing file and use that as template by saving it in DWT format

Number One...

Do you have a video how to transfer a WORD document text only; times new roman .... to autocad 13 MTEXT... Do not wish to type 4 hours of typing.

i am having difficulties triming the four circles on AutoCAD 2019, Please help.

@sabeercad

3 жыл бұрын

Its not related with AutoCAD version . If you closely follow the procedure you will surly get the result

Nice

Nice one

@sabeercad

4 жыл бұрын

Thanks 😊👍

Sabeer, first of all I wanna tell you thank you so much! all your videos are awesome and too helpful , second one I´ve got a doubt it´s too bassic but too annoying too ... could you tell me how to rotate and move the solid with the mouse? just like you did it in the minute 6:45 .... I´d be too gratefull if you can telle me.... subscribed of course! keep like that ill be following all your new videos with my friends

@sabeercad

3 жыл бұрын

Thanks for your interest and subscription. I have used presspull command to remove that face to create a cut out as shown in the video.

@michaelpreysler7360

3 жыл бұрын

@@sabeercad that’s interesting too but my doubt is about the rotate of the solid how can I move the point of view of the solid using the mouse like in solid edge or solid works? 🤔 I’ll be even more grateful if you can resolve my doubt! 🙏🏼

@amollohar2708

2 жыл бұрын

@@michaelpreysler7360 press shift key and with that scroll key on mouse

Unable to extrude 12 dimension partition there is no 2nd circle visiblity of 14 radius try many time but don't understand what's wrong with that it pick the first whole extrude partition then the 11 radius circle and result is different 😣

while giving the final fillet I am getting an inner fillet how to correct that?

Hi, may I know what this component is called?

sir which Autocad version you use like 2017, 2018 ? and I want to understand Autocad user interface so do you have any video about it ?

@sabeercad

5 жыл бұрын

Use 2018

@larilferreira8405

3 жыл бұрын

Watch this kzread.info/head/PLTEtynPmbym8ON4B2I6NFoK6wu8VLqlWk

hi sir, i could join that objects after polar array. 0 objects joined, 8 objects discarded from the computer. pls guide me sir

@sabeercad

5 жыл бұрын

If you follow step by step , you will surly get the result . If you still have any issues , you can send the file to sabeercad@gmail.com . I will check it ...

very good thankyou

@sabeercad

5 жыл бұрын

You are welcome 😍

Good work brother

@sabeercad

4 жыл бұрын

Thank you 🥰

Hi Mr. Sabeer why I can't trim the edges of the small circle r6 only the big one I can cut pls. Help me for this thank you👍👍

@tasmiahasan5837

2 жыл бұрын

i have the same issue

Best laptop for designing sir...autocad , artcam , interior designing

@sabeercad

4 жыл бұрын

Best configuration is always suitable, if you have budget. You can buy a computer with core i7 processor , 16 gb ram, 256 gb ssd, graphics card with 4 gb video ram etc.

Sir, may I know the benefits on creating 3d parts on Autocad compared to Inventor or Solidworks?

@sabeercad

5 жыл бұрын

Its relatively easy and AutoCAD files can be taken to any other software to perform various activities such as Animation , Analysis etc.

Am having problems on the last extrude you done I was in able to last extrude I think you are too fast in that stem or maybe there some as to done please show it slowly thank you

Sir one doubt..at 4:29 you join the whole object as one but for me it shows as '0 objects joined 11 objects discarded from the operation'. Please help.

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐..

It's Awesome Sir .... Sir can you please explain how students can get original and permanent auto cad new version .... I am the first viewer .....

@sabeercad

5 жыл бұрын

Thank You ! Please click on the following Link : www.autodesk.com/education/free-software/autocad

@suvamduttasd95

5 жыл бұрын

Thank You so much sir

Sir what limit should we put

great video :D May I ask how did u explode the array?

@sabeercad

4 жыл бұрын

Using the Explode command . Type "x" at the command prompt

thank sir ..

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐.

Sir the overlapping circle which was made to be used further, I am not able to catch that circle while exploding , plz help..

@merithlikibi3577

Жыл бұрын

Me too I was unable to do it, you first double the circle which has radius of 14 then when we're done with the first extrude and subtract you make another circle which also has 14 as radius don't forget for all the circles the center should be the same I mean the center of the first circle is the center of all the circle

@merithlikibi3577

Жыл бұрын

Feel free to hit me up if you're using Facebook

@visual_graphics

Жыл бұрын

Turn on the selection cycle

6:06 if i selected the second corresponding point....then automatically connected the first shaded extruded circle... 🔴

Sir this drawing trim command I can't do correct please explain

I can only select the innermost circle. If i select the d14 circle, it selects the whole surface.

@sabeercad

4 жыл бұрын

You can activate selection cycling and retry. Please check the video on this Topic in my channel.

@sushma1252

3 жыл бұрын

@PATHAN GAMING Live press ctrl and select d14 circle for 2nd level extrusion

Can you explain what a mechanical design engineer do in jobs? How he use autocad, i mean for what purpose? Like lets suppose we are asked to draw a drawing of a nut or bolt or gear. How can we do that? Like i have no idea about using it practically?

Than you

@sabeercad

5 жыл бұрын

You are welcome :)

Sir,..Cricle not trim that one prblm😑😕

Iam also can't catch the overlapping circle. So can't second level extrude please help me

Tank you sir

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐..

what is the version of auto cad you are using ?

@sabeercad

3 жыл бұрын

AutoCAD 2020

Need help pls . Am following you step by step process. But i can't join the polar array with circles like 4:24 as you do. It showing command 0 objects joined, 8 objects discarded.

@beoptimistic5853

3 жыл бұрын

kzread.info/dash/bejne/qHp4r8OBgZfRh5s.html 💐..

This Coupling using place?

hello sir, at 6:11 when you are extruding the last 2 circles. I seem to have trouble selecting the 2nd circle with the 14 radius. I keep selecting the whole already extruded circle. PLS HELP

@youngsinatra69

4 жыл бұрын

use ctrl+w bro

@Greedexile

4 жыл бұрын

@@youngsinatra69 oh thanks brother

@youngsinatra69

4 жыл бұрын

@@Greedexile shady is OP bro

@mijanorddin9665

4 жыл бұрын

can i know how to view like 6.46

@Greedexile

4 жыл бұрын

@@mijanorddin9665 type 3DORBIT

Hi can i know which version of Auto Cad this is?

@sabeercad

3 жыл бұрын

AutoCAD 2018

Nice video

@sabeercad

2 жыл бұрын

Thanks you !

I really need your help in Drawing assignment...its my first Autocad assignment I need help

@sabeercad

5 жыл бұрын

You can mail me in sabeercad@gmail.com

Good

@sabeercad

7 ай бұрын

Thanks

Hello sir Nice sir

Hello sir !! Sir 3d AutoCAD me viewcube or xyz axis k bare me complete video bhi banayiye plz .. kyuki jese hi hum view change krte hai xyz axis me pta nhi kya gadbad ho jati hai or usme kuch commands kaam hi nhi krti ..I mean apne nature k opposite behave krti hai..