Output voltage and courrent is depending on the output capacitor voltage. if you put 10uf 400v, you get 400v at 10mA. if you use 1000uf at 2500V, you get 1A 2500V. If you apply car battery at the output, you get 220Vac on the input; it is so powerful that you can run an hot glue factory with this. This circuit is a revolution of the atom theories🤣

Qur voltaje y q corriente queda en ka salida y si por error se invierte quema los led

❤❤❤❤❤❤❤

which makes its auto voltage to change?

I have already made it and it is working.. But if I kept the connection running for more than 30 second both resistors 220 ohm were high temperature although they were 2 watt power. Please explain

how many capacitor voltage?

Is capacitor voltage 400v used for its circuit ?

@ECircuits

4 ай бұрын

Yes I have used 400 volt capacitor but you can also use according to output or use 120 volt capacitor is better.

Back ground music is very bad

@ECircuits

3 ай бұрын

Okay dear

I don't believe this is safe nor functional . What voltage does a voltmeter read?

@ECircuits

3 ай бұрын

This is not safe. Do not touch any part of the circuit. I do not check the volts on the multimeter.

where is 3v output? 6v output? 9v output? 12v output? ...

@ECircuits

4 ай бұрын

I have run 4 volt, 9 volt and 12 volt LEDs with it. It is an auto driver so it will automatically step down the voltage depending on the LED voltage

@algharibe

Ай бұрын

@@ECircuits the resistor value is fxed , how the the cicruit step down the voltage automatically ?