Bless you for posting this, Sir MPJAONLINE. Without your video, I'd be lost on how to implement.

Too bad these have discontinued I wanted to buy like 20 of these... even tho you can just program something similiar on Arduino these were perfect for a class we wanted to do... would probably have kept buying them if the class worked out... Should bring this item back!

Thanks a lot for that excellent tutorial, I'm now ready to program my module as soon as it arrive.

I am using a similar unit with a display that I feed the motors from an ESC through the contacts. The problem is that it is fairly high current and I need to soften/suppress the change between forward and reverse to protect the ESC and gears from damage. Any help would be great!

Hi Thanks for your excellent demo. Written instructions offer a complicated method. 🤔 One question - when powered down, does the module retain its settings memory? Thanks - Dave

hi, thank for the explanation. can you advise on a reverse cycling motor controller that will control the speed as well?

How would I control this device with a 433MHz push button remote control (in stead of a manual switch)?

What if you wanted to pause in between your forward and reverse cycles? For example, forward for six seconds, 6 second pause, then six seconds in reverse, then, six seconds pause again, and then repeat.

So it just keeps going back and forth it doesn’t stop on it’s own? I wanted to get a set up like this for my power fold mirrors just open and close both sides timed so I don’t have to hold the trigger but the trigger would stay in position give on/off would be open/close in my case

Thanks for showing this

Hi, do you you have a video on DC12V Infinite LED Cycle Delay Timing Timer Relay on/off Switch Loop Module? I ask because I don't speak Hindi.

Hi there. I got a reversable geared 6v motor, but when I plug it in d2 operates is for a split second before resuming forward motion. If I disconnect the motor relay operates as normal. Any ideas?

Can the board also be programmed to pause between forward and reverse?

@Mert-tj4pm

6 ай бұрын

that board cannot do that you need something like this ''YS-RT1M 12V''

Did you know that if you solder a jumper to the 3 jumper selections for the M+ or M- connections you can actually use the multiplier for one direction and not the other. 6:18

Can the motor be powered at 24v using a separate power supply?

Hey.. that's a wonderful module.... What is the name of that module... Where can i buy that?

@RichRocketMan

2 жыл бұрын

www.mpja.com/Auto-Forward-Reverse-Cycling-Motor-Control-12VDC/productinfo/37217+RL/

How can I just program ONE cycle? I don't want it to keep looping.

@mytrahana

4 ай бұрын

Am not sure it can do that?!

Is there a way for you to cycle this forward 5 seconds the reverse for 5 seconds and then it stops. Like maybe with an external trigger?

@AztecWarrior69

Жыл бұрын

No. Not with this one. I demonstrate this very thing in my video. kzread.infodHeIsAFeYvo It runs for one cycle or as many cycles (up to the max the module can do) as you like. OR infinite. If you do not need it to stop before reversing, set the stop time to 0. Recommend you give it at least 1 second.

Excellent. Where can I purchase several of these

I bought one of these on amazon for $10-12.

@AztecWarrior69

Жыл бұрын

I got 8 for the same price

@tpfbb

Жыл бұрын

@@AztecWarrior69 good for you !!

@AztecWarrior69

Жыл бұрын

@@tpfbb I know, right.

Is there anyway you can ship to Canada?

Flipkart PE available in

Kaha milega ye controller

Sir controller name and price

What type of battery are you using to power this?