I really like how you only do your porting at the front of the barrel. Not just drilling holes everywhere and bleeding gas pressure right behing the chamber where it does very little for recoil reduction...

I have suggested this before, but here we go again. How about you offer the Apollo with two barrels: ported and non-ported. Then you could literally do everything with one gun.

@MrButchCassidy

3 ай бұрын

They usually reply promptly when direct messaged. I am more interested in having a second ported barrel on hand, but that's just me. I only shoot IDPA and Steel/2 gun matches.

Picking up my EOS next week!!!!

I love Atlas! I have an Erebus on order, counting the days until it comes in!

Such a cool design I really like the full rail all the way to the end I hope before I die I can get one .

How come no flush cut and crown on the apollo? Makes them look so much better imho.

Mouth watering OMG 🔥

I got a years wait for my order. I’m very excited

Thanks you for this video !!!!!

If Apollo has crowned barrel and a better looking slide cut, I'd pick it over Erebus.

@MrZhaokuo1225

2 ай бұрын

Exactly what I was thinking!

Nice! Cool to see what my #465142 spec look like. 🤙🏿

Are you ever going to make an Artemis with a flush comp, like an Atlas version of the XC?

Hey Adam, you had me nervous for a minute there I thought you were going to put the Apollo at the bottom of the pack at one time. I was beginning to think I ordered the wrong gun for a minute there.😎

I love the way the Nemesis looks, I shoot Limited optics & wish it was available with an optic cut. I'm looking at an Artemis....

I’m waiting for my Athena to be built! ❤❤❤

Atlas guns just rock! Have to get an Erebus!

Yes! :)

I see a Nemesis in my future.

Curious. Could you custom make an Apollo with a ported block and keep it 4.6 OAL on the barrel and comp? I know the ports work fantastic 👍🏻😎👍🏻 but the block is just more aesthetically pleasing for me. I love the look of the Pit/Sand Viper comp, but I want that on a carry sized gun with the flush 16rd grip. Is that possible, or am I asking for the impossible? Thanks brother 🫡 I love the line up! Best looking table top on KZread 👍🏻👍🏻

@AtlasGunworks

3 ай бұрын

Hi Bryan. Today our custom shop is not open. That would be a very custom setup. Its doable and lots of the custom builders could do that.

What was wrong with the barrel in the Apollo

*1:18** Really like the Artemis though.*

nice

Maybe an Ares in a steel frame option too

I appreciate you guys as a company for having nuanced guns. Some seem similar but absolutely exist for a reason. Also great move going to porting for the average joe very few people use comps within the ammo spectrum they are intended to work. An erebus with some N350 is a thing to behold haha

Erebus is my favorite of all my atlas pistols

Whats the loss in velocity on a ported 9mm pistol with 4.6" barrel length?

Adam(Atlas), would it be possible to order an additional non ported fitted DLC barrel for a Apollo?

@aguy3896

3 ай бұрын

My exact question. That would be the carry optics king.

@awokeone7997

3 ай бұрын

@aguy3896 that's what I was thinking 🤔

@MrButchCassidy

3 ай бұрын

I DMed on their site. Hope to hear back on the same question. I dont shoot USPSA LO so I really was curious if I could buy a second ported barrel for the Apollo.

@AtlasGunworks

3 ай бұрын

We are looking at that as a option.

@awokeone7997

3 ай бұрын

​@AtlasGunworks that would be great especially for us in California. Thank you guys

Which of these work with the left hand grip module? And is the left hand grip module aluminum or steel?

@AtlasGunworks

2 ай бұрын

You can order any gun with a left handed grip. The grips are fits so this needs to be done at time of order.

Hope some day to be able to afford these guns (one at least). Love them. Like cookies, I can't think to have one....😂

Wondering on Apollo , if it also could be used as EDC ??

@AtlasGunworks

2 ай бұрын

If you are ok with carrying a gun with a 4.6 inch barrel it will work well for EDC

I want an Apollo, but I think the Athena looks so SO much better that I’m probably going to end up ordering that instead.

Have erebus and Artemis dont see how you get much better, but these price bumps over the last year, little crazy imo

👋

Anyone know what the Apollo is made out of (SS, Carbon steel, or Aluminum) TIA

Are sight blocks legal in USPSA Limited Optics? Asking for a friend 😂.

@dyedm11

3 ай бұрын

Yes

@steveh1792

15 сағат бұрын

I've been shooting my Artemis in LO since LO became an option.

So is this Athena better than the titan? I’m confused. You make it seem like it’s not as good as the Athena. I’m on the fence and those are my two options.

@AtlasGunworks

2 ай бұрын

Most shooters with normal grip pressure will like the Athena's return to zero more that the Titan. Return to zero = grip pressure x ammo x gun (and recoil spring in gun)

Why don't you have pistols with 10mm caliber and only one pistol (Titan) with 45 caliber is available?

ordered erebus,,maybe after erebus i ll get the athena or artemis rds

Could I still carry the Apollo?

@bradpowell843

3 ай бұрын

You could but it’s honestly kinda big for an EDC.

@MrButchCassidy

3 ай бұрын

I carry my Titan RDS and it's not bad. Yes it's heavier than polymer and longer barrel. I carry under a jacket during the winter with a very low profile OWB so it's really no biggie. When it gets hotter then it gets more difficult and I usually carry 4-5 o'clock behind the hip IWB. Appendix for my body type and weight is not a problem but its NOT comfortable, especially when driving. I either dismount the holster/gun when driving or end up moving it behind my hip anyway.

Adam……What happened to the Chaos!

@Warhear87

3 ай бұрын

Chaos got retired in December 2023. They did a limited run of Chaos RDS before sunsetting. Check the channel for the video. Edit: correction below

@OrionCorsari

3 ай бұрын

Damn shame Adam doesn’t have a single true open/major gun in the lineup

@Warhear87

3 ай бұрын

My bad dude. You were asking about the open guns. It was the HYPERION that was retired. The Chaos open guns are only seen to come up as raffle guns. They did a fundraiser for 2A Rights in Vermont and raffled a full custom Chaos

@codean909

3 ай бұрын

Atlas said they were only building one chaos v2 in 2024 and it was for a raffle. Seems like an odd decision, but maybe they will be available next year.

@MrButchCassidy

3 ай бұрын

I think it's probably not gonna be offered for awhile. Open guns are pricey to make and super niche. They require a lot more support/parts and generally you have to have deep pockets to use it to it's full potential in USPSA/IPSC open div. I can see why it's taken a backseat. With BUL making open guns at a fraction of everyone else it just seems like diminishing returns. Atlas has such a great lineup and it's hard enough to get one as is!

Artemis or Athena for USPSA Limited Optics???

@MrButchCassidy

3 ай бұрын

Artemis. It's gonna track flatter and have a quicker return

@AtlasGunworks

3 ай бұрын

The staff is split. Adam shoots the 4.6 gun in 9mm with a medium grip. The guys with monster grip pressure and very light grip pressure like the Arty.

atlas erebus should have been john wick gun..instead of that TTI Pit viper lol

The ares is the best pistol from atlas but everybody downplays it. I don't get it.

Looking forward to your 10mm guns. 9mm is so blasé.

Can’t find these pistols in stock anywhere except a few Artemis at 7200+. Where can I get an Apollo without having wait for months?

@jigglyjames29

3 ай бұрын

Nowhere. I was quoted a year if you order from Atlas directly. Cancelled and ordered from Portside Munitions. Them or Kovert are probably the way to go if you don't want to wait forever.

@joeyassyrian

3 ай бұрын

can buy used on 1911 addicts classifieds

@PnP-td1mt

3 ай бұрын

@@joeyassyrianyeah a beat up Artemis with 1 mag for 6800.. No thanks.. Found a few new Artemis pistols for 7200.. the Apollo, NYX, and others in the 6k range (new) is what I’m after

@PnP-td1mt

3 ай бұрын

@@jigglyjames29Kovert won’t respond to by emails. I have emailed them several times ready to buy what ever they had in stock.. nada.. I won’t pay that kind of money to wait a year. Sorry.. just not happening. I have the Watchtower Apache already and have already fitted a cheely E2 grip to it (my self). Had the grip and other parts that I re fitted PVD and DLC coated outside the industry. Took 13 days including shipping to coat the parts..

@cenellharrell

3 ай бұрын

Who is better Portside vs Kovert?

Sad, not much love for Nyx.

Your firearms are too good and too temping to purchase. (I have two) I need to unsub from this channel. Dang!!!!!!!