Asus should sponsor you bro. You did a better job reviewing this case than 90% of the videos in KZread about this case. Great job #ThisIsHowItsDone #ThumbsUp

@KleoYan

Жыл бұрын

Hi GJGBlackDragon, welcome to my channel and greatly appreciated your valuable feedback. All the best with your build too. 😊

This has to be 1 of the best case reviews I have seen in a very long time, Great Job.

@KleoYan

Жыл бұрын

Hello MunkeyUK, welcome to my channel and thank you for your feedback. 😉

@markcumbriauk

Жыл бұрын

@@KleoYan It was a great review, very detailed, because of Your review I bought this case. 😁😁

@KleoYan

Жыл бұрын

@@markcumbriauk Nice, yup this case its like an armour tank with lots of features. all the best with your build.

Been looking at case reviews for days. I have been watching case reviews for days. Your thoroughness is unsurpassed. Everything is answered for the GT502 right here. Thank you!

@KleoYan

10 ай бұрын

Hi YTBeth, welcome to my channel. I am glad you found something useful for you and you are most welcome. All the best with your build too. 😉

Thank you for this videos sir. Getting ready to take the plunge and build one of these for the first time and this will certainly help.

@KleoYan

10 ай бұрын

Hi MalShakur, welcome to my channel. Thank you for your valuable feedback and all the best with your build too. By the way, just call me Kleo 😉

This guy is a genius. Every features of case is so detailed . Thabk you for such a good review of this asus case.. very informative thankyou

@KleoYan

8 ай бұрын

Hi Jhulez26, welcome to my channel. Thank you for your valuable feedback, greatly appreciated it 👍

best rev on KZread about this case amazing job

@KleoYan

6 ай бұрын

Hi WA LID, welcome to my channel and thank you for your valuable feedback. All the best with your build too. 😉

You thought and you succesfully presented all the details that someone needs to know. You really made an amazing presantation. Congratulations!

@KleoYan

5 ай бұрын

Hi Ιωάννης Καπελάκης, welcome to my channe. Thank you for your valuable feedback, greatly appreciated it. All the best with your build too 😉

Fabulous video. Been looking at this case but was put off by a few other reviews because they complained about not being able to fit a 360mm rad in the side mount. The extra detail you have gone to here, actually specifying the exact dimensions of the side mount radiator support, means I now know my current AIO will in fact fit.

@KleoYan

Жыл бұрын

Hi @ShakeyVaccy, welcome to my channel. I am glad you found something which you need. All the very best with your build 😉

Thank you for this in-depth review for this case I have been looking for one since I just ordered this case thank you so much new sub here!! Great job sir!

@KleoYan

Жыл бұрын

Hello TheHITMAN2019, welcome to my channel and I am gald this does help you in someways.. all the very best in your build too.

I saw a reviews of this case and my God yours is the best!

@KleoYan

10 ай бұрын

Hi Don Pac, welcome to my channel and thank you for your kind words. I am glad you like my content and all the very best with your build too 😉

Absolutely do not stop making content because you are simply one of the best and most thorough. I look forward to more of your content 😊

@KleoYan

6 ай бұрын

Hi Dr. Al, welcome to my channel. Thank you for your valuable feedback, greatly appreciated it 😉

best review, just built my rig in this case and its great

@KleoYan

3 ай бұрын

Hi Daniel Munteanu, welcome to my channel and congrats with your build and thank you for sharing your impression of this case too. 👍👍👍

I have the same case and loving it. Good step by step on the case and accessories. Very informative!

@KleoYan

8 ай бұрын

Hi Kpbizzle, welcome to my channel and I am glad you like my content. Once again thank you to have visit and to leave your valuable feedback. 😉

Thanks for detailed explanation about Arct. LF 280!! Looking for this AIO in this case!

@KleoYan

4 ай бұрын

Hi Михаил Д, welcome to my channel and I am glad you find this content useful. All the very best with your build too 😉

U answered everything I am looking for 👏🏻👏🏻

@KleoYan

3 ай бұрын

Hi Nasser Mousa, welcome to my channel and I am glad you like this content. All the best with your build too. 😉

Very helpful, thanks!

@KleoYan

Жыл бұрын

Hello A Random Space Traveler, welcome to my channel and thank you for your feedback.

the best video of reviewing you are probably the best at this job they should pay you

@KleoYan

5 ай бұрын

Hi Иван Стоев, welcome to my channel and thank you for your kind words. Greatly appreciated it and all the best with your build too 😉 I am happy that I get to review stuff for Asus as they are willing to loan me pc components. That’s more than anything else but thank you for your compliment 👍

this video was very helpful Thankyou

@KleoYan

8 ай бұрын

Hi basha ii, welcome to my channel and thank you for your valuable feedback. All the best with your build too. 😉

i have this exact case, thank you for the walkthrough uncle

@KleoYan

3 ай бұрын

hi Drifter, welcome to my channel and am glad you like my content. Thank you for your feedback.

Great Video! Very well presented and spoken. You can tell a lot of thought has gone into the manufacture of this chassis/case. I'm not one to vertically mount GPU's. However, in this case I have been persuaded lol. PC cases are expensive these days, so your in-depth reviews are muchly appreciated. Cheers - Jass.

@KleoYan

Жыл бұрын

Hello JassassinE, welcome to my channel and thank you for the feedback. Am glad this did aid you in someways. All the very best with your pc build. Infact having GPU vertically mounted has its advantage and this might interest you as why it’s of advantage kzread.info/dash/bejne/Y4eEy9F_Z5vej6g.html

Brooo you make really good reviewz very informative. Thank you so much

@KleoYan

10 ай бұрын

Hi joven canezal, welcome to my channel and thank you for the compliment. All the very best with your build too. 😉

I love how it has handles. I wish the Lian Li 011 Dynamic Evo had handles as much as I'm messing with it and stuff. LOL I love how you blurred your face in the reflection. At first I was like "wtf is going on"?

@KleoYan

Жыл бұрын

hello Elliott, welcome back, yup I wish that too. Its so much easier to handle the case. lol.. ya what's important is the content and not my face, sorry about that

@erdalguncel9038

Жыл бұрын

Does rtx 4080 fit in o11 dynamic evo without having issues by power cables when you close the side glass panel ? I have galax rtx4080 and im looking for a case which i can moınt horizontally with no issues

Great video Thanks for mentioning screws

@KleoYan

Жыл бұрын

Hello mavado5046, welcome to my channel and thank you for your feedback. All the best with your build too 😉

Very impress about the review. You got yourself a new subscriber. Haf 700 berserker next. Ty.

@KleoYan

Жыл бұрын

Hi ya Bruce Lee, welcome to my channel and Merry Christmas, thank you for your feedback and suggestion about the Haf 700. I see what I can do but no promises.

I love your video. You made completed detail review.

@KleoYan

Жыл бұрын

Hi Mua Lan, welcome to my channel and thank you for the feedback 👍

Hello! I really liked your review, keep it up and in the future you are a master of your craft :))+++

@KleoYan

Жыл бұрын

Hello Дэкас, welcome to my channel and thank you for your compliment. Happy New Year too.

The video impresses with its well-presented content on a meticulously crafted chassis. Despite initial reservations about vertical GPU mounting, the thoughtful review has convinced the viewer. Appreciation is expressed for detailed reviews, especially considering the current high cost of PC cases.

@KleoYan

8 ай бұрын

Hi , Sandy Valdez, welcome to my channel. Thank you for your kind words and valuable feedback. Greatly appreciated it. All the best with your build too if you are considering to get this case. 😊

@Dreadpirate-or2qe

8 ай бұрын

Exactly the reason I found this video, I have seen a few build videos but it's mostly montages or just general information. I'm glad I found this video, it's detailed and interesting. Great narration and my question was answered.

@KleoYan

8 ай бұрын

@@Dreadpirate-or2qe hi, welcome to my channel, I am glad this content did aid you and thank you for your valuable feedback. Maybe some tricks for you for thanks giving 😊kzread.info/dash/bejne/qo5mtJarn6mXj7Q.htmlsi=cORqIx64RmYH3_c5 it's not able the thermal paste but the method on applying. Some of my viewers have reported with good thermal results and It works for Intel too. You might want to give it a try.

Definitely my next case 💪💯

@KleoYan

Жыл бұрын

Hello Tech Heaviz, welcome to my channel. I am sure you will like this case as I did. all the best with your build.

Great review,as always kleo amazing at explaining, NOTE: If you're going with this case notice that deepcool AK620 digital, the screen will slightly touch the Glass ( its closes ) , so its barley fit . Also there is another version called Plus that comes with fan hub

@KleoYan

Ай бұрын

Hi Human, welcome back 😉 and thank you again for the additional info 👍👍👍

Thank you for confirming a 280mm aio fits!

@KleoYan

Жыл бұрын

Hello HumorousBENT, welcome to my channel. I am glad this content did aid you out, all the very best with your build 😉

Thank you for such a thorough review, was trying to find out if I could vertical mount a GPU and couldn't find an answer anywhere.

@KleoYan

10 ай бұрын

Hi JD Perry, welcome to my channel and am glad this content did aid you. All the best with your build too. 😉

Nice review man!

@KleoYan

Жыл бұрын

Hello Jeff Holmsrom, welcome to my channel and thank you for the compliment.

Thank you for your video. Yours was the only one to actually go through in detail the various features of the case, including the fact that oversized GPUs such as RTX 4xxx series are only possible to be mounted vertically and the case doesn't have enough clearance anyway for the 12VHPWR power connector if mounted horizontally. A good case but several glaring omissions by ASUS. Also on the white version of this case, the front panel connectors are all on one F_PANEL block - which is not mentioned in the manual at all.

@KleoYan

Жыл бұрын

Hi WB, welcome to my channel and thank you for your valuable feedback.

@wb141

Жыл бұрын

@@KleoYan Yan what was the length of the riser cable that you used here - was it 10 or 15cm? I was thinking of the next gen RTX 4xxx due to how wide they are - I need to find out exactly the right cable length otherwise there is nowhere for excess cable lengths to go to.

@KleoYan

Жыл бұрын

@@wb141 mine is a 20cm.

@wb141

Жыл бұрын

@@KleoYan thanks! that works okay with your AORUS Master 4090?

@KleoYan

Жыл бұрын

@@wb141 it’s a 4090 gaming oc and yes it works.

I LIKE THIS CASE.. but I don't like the tuf crest and too much embross wordings. maybe I will consider this case for my son hahaha. Good content again as aways. If I ever need case review, I will fist to see if you do have the case I wanted. No reviewers out there will bother to talk in-depth which is a shame. Keep it up with the good work Kleo. 🥰😘😍

@KleoYan

Жыл бұрын

Hi ya Nox, welcome back and thank you for the motivation and to have supported me. 😁

Your video is very complete and informative, thank you, I'm subscribing to your channel.

@KleoYan

6 ай бұрын

HI Marcelo Neres, welcome to my channel and thank you for your valuable feeedback, all the best with your build too 😉

@marceloneres

6 ай бұрын

@@KleoYan thanks so much.

@KleoYan

6 ай бұрын

@@marceloneres you are most welcome 😉

@marceloneres

6 ай бұрын

@@KleoYan Could you tell me if there is a website that sells all the cables for a Full modular power supply, but those cables covered with nylon? In the country where I live I only find nylon-coated extension cables, but I don't find the power supply cables themselves.

good review .. good job 😊👍🏻

@KleoYan

8 ай бұрын

Hi Marjorie Anne, welcome to my channel and thank you for your kind words, greatly appreciated it. Now I am super curious. out of sudden there are so many commented on this content, I am curious are all of you from the same community or group? if you are.. maybe another content which is worth watching, is not able the thermal paste but the application which I have shared. My viewers have replied, it's useful kzread.info/dash/bejne/qo5mtJarn6mXj7Q.html

Uff man u rocks U know what i want Just love this case ❤️

@KleoYan

Жыл бұрын

Hello T O N M Y, welcome back and Happy New Year. Glad you like the content 😬

@sBlaze0o07

Жыл бұрын

@@KleoYan happy new year man

@KleoYan

Жыл бұрын

@@sBlaze0o07 thank you 😊

thanks bro

@KleoYan

Жыл бұрын

Hello DX5 DX6, welcome to my channel and you are most welcome.

Impressive

@KleoYan

8 ай бұрын

Hi Geraldine Dosdos, welcome to my channel. Yes this case indeed very impressive. The build quality and the modularity. Once again thank you for your feedback. 🙂

FYI I just picked up the new Lian Li Edge power supply and it's a perfect fit in this case. The cables are nearly custom length made for the gt502. Highly recommend

@KleoYan

15 күн бұрын

Hi electrodonk, welcome to my channel and thank you for the info, greatly appreciated it.

Best review 🎉🎉❤❤❤

@KleoYan

8 ай бұрын

Hi Rizza Melmida, welcome to my channel and thank you for your kind words, all the best with your build too. 😉

usefull video. thank

@KleoYan

Жыл бұрын

Hi wilson gautama, welcome to my channel and I am gald you fiind this useful. All the best with your build too.

great video. thx man ::))

@KleoYan

Жыл бұрын

Hello berk medya, welcome to my channel and thanks for the compliment.

@berkovichshorts

Жыл бұрын

@@KleoYan 11:53 This part was very helpful for me, thank you very much. I was thinking of a 280mm liquid cooler, I was informed.

@KleoYan

Жыл бұрын

@@berkovichshorts you are most welcome. All the best with your build.

When using a ARGB Hub connected to the cases front switch, do you need to connect all fans into the same hub or will they all sync using the front button even with some fans connected directly to the motherboard ARGB header also? I have 2 x 3 packs for the ASUS TUF fans and 1 x additions for the rear of the case. and will also add a 360 AIO so wondering the best way to connect and sync everything up.

@KleoYan

Жыл бұрын

Hi The Expat Gunner, welcome to my channel. I only plug all argb connectors of the fans to the argb fan hub. As for the Fan load, I connect them directly to the motherboard. Same apply to the Liquid AIO fans. This way you can control your fans RPM via the motherboard separately (recommended) and to have the ARGB effects controlled by the remote controller from the argb fan hub or to use the case switch (Make sure the motherboard argb connector is connected to the case button and to set the argb fan hub)

Cool ❤

@KleoYan

8 ай бұрын

Hi dorenkaye engbino, welcome to my channel and thank you for the heart 😉 All the best with your build too.

Nice

@KleoYan

Жыл бұрын

Hi boukhari messtapha, welcome to my channel and thank you for the feedback.

I got the case in white a week ago, my peeve also with the case is you carnt use a 360mm rad on the back wall without losing out on a fan above or below because of where the AIO tubes leave the radiator im sure my CPU would drop 10 degrees if I could have my AIO as a intake, also iv had to block the rear panel rear vent with my fan orientation being the same as yours as there is no filter for that but they included 3 for the back panel wall vents.

@KleoYan

Жыл бұрын

Hi dizzee G, welcome to my channel. Yes there are limitations on the AIO mount at the side. As for the 3 fan bracket at the back. I have tested it out. it's best to push air through to cool the motherboard in someways. On my 7950X without the three fans my highest consistant clock speed is at 5.1 to 5.16Ghz with random boost clock of 5.5 to 5.56Ghz. if I am to place three fans and to blow cool air to the motherboard area, I am able to achieve a consistancy of 5.2 to 5.25Ghz with random boost of 5.6 to 5.68Ghz. Once again thank you to have visit and to leave your valuable feedback. thank you!

Great review

@KleoYan

Жыл бұрын

Hello Stundar Dutch. welcome to my channel and thank you for your feedback. All the best with your build too.

@stundardutch5320

Жыл бұрын

@@KleoYan Have you any experience with the thermaltake view 51 which seems similar in many ways

@KleoYan

Жыл бұрын

@@stundardutch5320 hi and nope, I did try to write in and request from Thermaltake but with no response. so am sorry that I do not have any info about that case.

@stundardutch5320

Жыл бұрын

@@KleoYan thank you very much for the reply

@KleoYan

Жыл бұрын

@@stundardutch5320 you are most welcome and all the very best with your build.

Thank you for the detailed video. Do you think a Lian Li Galahad II Trinity 360 would fit on the side if 3 fans are used at the top or bottom since the tubing is angled at 45 degrees?

@KleoYan

7 ай бұрын

Hi gogeta01, welcome to my channel. I wish I can test it but the case was returned to Asus SG, therefore I can’t confirm and to give you an answer, real sorry.

The love child of lian li o11 and corsair 680😁

@KleoYan

Жыл бұрын

Hello Francis Dumlao, welcome to my channel and thank you for your feedback.

Thank you for the informations! One question: do you know if TUF video cards also have this horizontal fitting incompatibility? More specifically, TUF 4060TI. Thanks!

@KleoYan

7 ай бұрын

Hi Tenemhur, welcome to my channel. You should not have an issue to fit the 4060Ti Tuf card, if you are referring to this card www.asus.com/sg/motherboards-components/graphics-cards/tuf-gaming/tuf-rtx4060ti-o8g-gaming/techspec/ as the case height clearance from the motherbord to the side panel is at 163mm and the Tuf 4060Ti card is at 139mm. There are more than enough space to mount it horizontally.

Great review! Thanks! I was wondering why Your RAM doesn't synchronize with fans lights? You didn't use the hub? Also i was wondering how does the graphics card holder connect to pc case?

@KleoYan

Жыл бұрын

Hi Jofosey, welcome to my channel and yes. My rams do not sync with my fans as the rams and plug to the motherboard. As for the vertical mount, it’s hold well. No sag or whatsoever as there is a hidden pillar between the bottom of the vertical mount and the bottom fans.

Great review and you cover aspects people actually need... not quite sure why you couldn't fit the GPU horizontally though, is it >160mm?

@KleoYan

Жыл бұрын

Hi raydioz, welcome to my channel, yes the clearance is only at 163mm. For RTX 3000 series card not an issue, just that the RTX 4000 series, as the 12HVPWR connector will be bend, so best to use vertical mount instead of horizontal. I am in favor of using vertical mount more than horizontal as this is the reason why kzread.info/dash/bejne/Y4eEy9F_Z5vej6g.html (better thermal results)

Great video! I am planning to use this case with Arctic Liquid Freezer II 360. But I am not shure if this AIO will not block the cable access to CPU because it is 360 and can not be moved in front like 280. Did you try Arctic Liquid Freezer II 360 at top? Thx

@KleoYan

Жыл бұрын

Hello Peter Benicky, welcome to my channel and Happy New Year. the answer is yes you can mount a 360 LF2 without issues at the top and it will not block your EPS cables to your motherboard.

Great video! I'll probably get this case next month. It makes the 3080 TUF looks small in there LOL. I have a question about the included gpu holder. It appears it cannot be used if there are fans placed at the bottom of the case, is that so or am I seeing wrong here? Well, at least it looks like it will fit the thick artic liquid freezer 360 at the top

@KleoYan

Жыл бұрын

Hello LUIS VIGURIA LUZA, welcome to my channel. you are not wrong, with the original vertical mount provided, you can fit fans below and yes, you can mount a Arctic LF2 360 at the top.

nice gadget

@KleoYan

8 ай бұрын

Hi , Cedric Lagarde, welcome to my channel. If to compare with the O11D family from lian li, yup this is something unique and the build quailty is top notch.

Nice review! Is it possible to mount 240 aio to the top and add 3d fan just for symmetry?

@KleoYan

Жыл бұрын

Hi Oleksandr Kanaikin, welcome to my channel. I don’t think you can do that as the 240 rad has extra material protruding out. It’s not like it’s 240mm where you can place the 3rd fan.

Good detailed video again. How do you think this thing stacks up against the O11 Dynamic or Evo?

@KleoYan

Жыл бұрын

Hello DXM55_, welcome back. Each have it's own good and bad. O11D or EVO are of a bigger case which allows all kinds of Liquid AIO set up. As for this case, though there are issues at top and bottom fans if you mount a 360 liquid AIO at the side, there are other areas which I like. The most important thing which is the handle that O11D or EVO does not have. It make things so much easier to carry such a big case which a system in it. next will be the additional 3 more fans which you can mount at ther cable management are. I am not sure about others but it does help to cool down the motherboard which is good for me, since components like the areas from m.2, vrams heatsink and even ram slot will dispate heat on the motherboard. The last factor is looks. It greatly depends do you want a clean look from Lian Li O11D series or the Tank look from the Asus GT502. To me if really have to choose between the two. I would go for this GT502 as I carry cases around and it's more practical to have the handle at the top, also I love tanks so I dont mind the look.

Great Video! Is it possible to turn off fans lighting by cycling through toggle button? I searched online but couldn't able to get answer.

@KleoYan

Жыл бұрын

Hello Sparkman, welcome to my channel. If you press and hold on to the led button for 5 seconds. It will trigger motherboard argb mode and if the argb cable of the case is not plug to your motherboard argb header. It will just turn off the argb dlcdnets.asus.com/pub/ASUS/ODD/DC/GT502/Q21477_TUF_Gaming_GT502_A5_UM_V3_WEB.pdf?model=TUF%20Gaming%20GT502

hi, can you please say i should connect cable fan from controller hub to which header? "cpu_fan" or "cpu_opt" or "cha_fan"? my mb is prime z790-a wifi.

@KleoYan

Жыл бұрын

it depends what fan you are connect to the hub.. if it's radiator fan, you should plug to CPU_FAN, if it's case fans, plug to CHA_FAN.

Great review again. I just bought the white version of this case and feel like I am now ready to build knowing all the weird things I may encounter. I am very curious what thermals in this case look like with gpu mounted vertically vs standard.

@KleoYan

8 ай бұрын

Hi Suzuki 4 Life, welcome back. I wish I had more time with this case and I can answer you regarding about the performance. But as based on my experience it will be best to have GPU Vertically mounted with fans below it, do test it out to see which gives you better thermal results and I will be glad to listen to your experience too. All the best with your build. 😉

Got this case and it's close to perfect...

@KleoYan

Жыл бұрын

Hello medivoadmin, welcome to my channel and congrats on the purchase. You will definately like this case. Once again thank you to have visit and to leave your feedback 😉

@medivoadmin

Жыл бұрын

@@KleoYan well made review....👍👍👍

@KleoYan

Жыл бұрын

@@medivoadmin thank you for the compliment.

Thank you for the very thorough overview. I'm looking at this case myself and studying the different airflow options I can do. Do you think a 360mm AIO CPU cooling unit with a 410mm tube length could successfully be mounted in the rear chamber? If not, what kind of tube length is required?

@KleoYan

4 ай бұрын

Hi Sasha, welcome to my channel. For 360 liquid AIO. It should not be an issue to mount at the rear chamber. The only thing will be, one of the side fan slot, you have to leave a hole for your tube to be routed to the front. 400 tube length is sufficient to route through.

@threemays

4 ай бұрын

@@KleoYanThank you very much! 😊

@KleoYan

4 ай бұрын

@@threemays you are most welcome. 😉

Hi Yan, was wondering if you can find out from ASUS, for those of us who had bought the normal GT502 without integrated ARGB hub - is it possible to buy this integrated ARGB hub (that was included with GT502 Plus) anywhere? I don't know why ASUS decided to market two separate versions of the GT502 cases without ARGB hub - it can't have been that much of a cost saving, and it leaves the ARGB control cable useless in the plain GT502 case.

@KleoYan

Жыл бұрын

Hello WB, welcome back, sure will help you ask. Btw call me Kleo instead of Yan thanks.

@NoneofyourBusiness-gy9yw

Жыл бұрын

i am using the arctic controller, slight incompatibility as it does not have a pin for the casing switch but everything else work with my no rgb mobo. i just couldn’t accept myself buying TUF super noisy and slightly pricy fan.

Hi. About the vertical mounting for GPU, what is the 'optimal length' of the pcie riser cable needed? (assuming connecting from the top slot of ATX motherboard)

@KleoYan

3 ай бұрын

Hi Paulus Sidabalok, welcome to my channel. It will be best to use a 300mm riser cable.

@PaulusSidabalok

3 ай бұрын

@@KleoYan Thank you very much ❤❤

@KleoYan

3 ай бұрын

@@PaulusSidabalok you are most welcome 👍

thank you so much for this nice review. Just bought this case for a inno3d 4090 and I hope I can put it horizontally :D also I bought the PSU Corsair HX1500I. Guess things are going to be tight inside :D however I love the military look of this case that's why I choose it

@KleoYan

Жыл бұрын

Hi esperando el render, welcome to my channel. Maybe get the height of your GPU. I would say Infact for most 4090, you can’t fit as you need to consider the additional height of the 12VHPRW connector. You will need another 20mm inorder not to bend the cable and to be able to close the side panel.

@esperandoelrender

Жыл бұрын

@@KleoYan thank you so much for reply! This is the size of my card: Length 336mm Height 145mm Width 60mm I'm going to buy ASAP the cable from corsair for avoid the adaptor, but I live in Hungary and seems like there isn't shops with stocks now in the whole Europe Do you think is a better Idea to put it on vertical?

@KleoYan

Жыл бұрын

@@esperandoelrender hi, based on your height of the inno3d 4090 card, I don't think is a good idea to plus it horizontally as you only left 15mm tall for your 12HVPWR connector and to be bend. I would advise to do a GPU vertical mount instead. As I try to search in amazon USA, EU and SG, most run out of stock for the 12VHPWR cable for corsair, your best bet is to get it from cablemod store.cablemod.com/compatibility/

@esperandoelrender

Жыл бұрын

@@KleoYan I'll check that thank you so much. Btw In vertical even with the adaptor from nvidia before I get the proper cable should be fine too right? Thank you so much

@KleoYan

Жыл бұрын

@@esperandoelrender Hi esperando, if you doing vertical, so long you clip it tight down. you should not have an issue. but make sure not to bend it too much.

hi, for RGB front panel button, we have 2 cable. 24:15 1 cable connect to ARGB header on motherboard right? 1 another goes where? i think u said in case's hub right? i bought a normal model which i think it hasn't hub. ------------- my mb is prime z790-a wifi and it have only 1 rgb header which i want to connect that to pomp rgb (lt720). how can i connect second connector (rgb gt502) to that header at same time with lt720 pomp rgb? if i use splitter, didn't it overvoltage on that header? is this way safe? thanks. (i don't want to use controller hub yet).

@KleoYan

Жыл бұрын

Hi M, welcome back. plug the ARGB cable of the case to your motherboard ARGB header. as for the other cable, it's for you to plug into an argb hub which is not provided in this case. you can ignore this cable.

Can i put 3 hard drives in the rear tray of the Aio?

@KleoYan

2 ай бұрын

Hi Ryan, welcome to my channel. I am terrible sorry that I have returned this case to Asus SG, unable to test it out for you. you might want to try asking at Asus reddit forum www.reddit.com/r/ASUS/

How about the 360mm freezer II on top?

@KleoYan

Жыл бұрын

Hello Davis-PC, welcome to my channel. You can mount 360 Arctic Liquid Freezer II. No issue.

I have this case and agree with your complaint about the side-mount 360 AIO. Have you tried mounting an AIO to the rear chamber's side bracket, though? Asus advertises it as an option.

@KleoYan

Жыл бұрын

Hi MMCedutor02, welcome to my channel. Is more of letting others know about the side. Not really a complaint. As for the rear chamber. 1st I do not like the look for it as the hose sticking out and 2nd yes it can draw cool air to the rad but hot air is hitting the motherboard so I drop the idea. The rear chamber only best to use as air intake to cool the motherboard.

@MMCeditor02

Жыл бұрын

@@KleoYan Fair enough :) I was actually thinking of trying to put a rad there one day with the rad fans set to exhaust air from the case, but I'll see.

@KleoYan

Жыл бұрын

@@MMCeditor02 yup it’s up to individual to see what’s possible in this case. This vid is based on my own way. Others might have better way. This is where I get to learn from you too 😉 All the very best with your build 👍 do let us know your results and findings. That will greatly help others too. Thank you again 😊

Thanks for the in dept review of the case. I just wonder what ARGB hub do you have for this setup?

@KleoYan

Жыл бұрын

Hi Cengiz Han Ceciker, that controller is from Gelid. It’s known as the amber 5.

@cengizhanceviker9639

Жыл бұрын

@@KleoYan Thank you.

@KleoYan

Жыл бұрын

@@cengizhanceviker9639 you are most welcome.

I forgot to ask, I have a Arctic freezer 2 as my aio cooler, will it fit in the back of the case?.

@KleoYan

Жыл бұрын

I would not advise you to use a Arctic Liquid Freezer II 360 at the back of the case. the rad is too thick.

@markcumbriauk

Жыл бұрын

@@KleoYan its a 280, but thanks

@KleoYan

Жыл бұрын

@@markcumbriauk hmm..if you already have that liquid AIO, you can give it a try, if can't fit then you will need to put it at the front.

I would love a smaller version of this case... For MATX motherboards... Just as the asus prime ap201... But with Tuf aesthetic, double chamber and smaller dimensions since the PSU will be hidden in the rear using the extra front space for airflow and sick compact builds without going into miniITX

@KleoYan

Жыл бұрын

Hi Stephan Cardenas-Navarro, BINGO! I like your thoughts.. will submit your suggestion to them. Thank you!

@mualan4683

Жыл бұрын

The problem is that SFX PSU are way too expensive for 1000W. The M-ATX motherboard nowaday are very rare and cheap made. I saw the Crosshair X670E Gene is over $600+.

@stephancardenas-navarro127

Жыл бұрын

@@mualan4683 almost everything is that expensive if you look how the gpus are being priced... However for MATX you don't expend the most expensive 1000w psu nor the x670e, I saw a b560e Tuf and 750w build not too long ago and was bonkers... When you are going to go all out with a build you either go with ATX/E-ATX or mini-Itx... For the price point of these cases you definitely would use it for mid range but cool looking builds that requires les than 1000w psu's!

@KleoYan

Жыл бұрын

@@mualan4683 hi welcome back, I don’t deny what you are saying. Though this case allows you to use a full ATX PSU, 1000w PSU be it sfx or atx, both are rather expensive. As for motherboard. Some m-atx are still manageable interms of price like the MSI mortar series, the ASRock PG and the gigabyte ax too. But I do agree is abit high for the price for these days of motherboard.

I have a question. Is it able to do a push & pull configuration in the top or the side?

@KleoYan

6 ай бұрын

Hi Rezuan Isham, welcome to my channel. For liquid AIO with radiator 28mm thickness and fans, It is possible to mount at the top. I would advise not to do at the side. You will hit into issues whereby your top front and bottom front fans will not be able to fit. Also please take note of your motherboard side vrm and your rams profile if you doing push pull configuration at the top.

@razerangelri

6 ай бұрын

@@KleoYan based on your review on montech king and Tuf which one will be better in terms of airflow and mounting push and pull capabilities?

@KleoYan

6 ай бұрын

@@razerangelri both cases are possible with push pull so long you keep the radiator to 28mm thick. As for airflow, Montech King95 has the advantage.

Dang, I can't seem to find this case anywhere. Where'd you get yours from?

@KleoYan

Жыл бұрын

Hi SaturdayMorningHero, welcome to my channel, this case was from ASUS Singapore direct, maybe you can check if you are able to purchase directly from Asus.com.

could you identify the fan direction ( intake and exhaust ) for bottom top side and back

@KleoYan

10 ай бұрын

Hi OldSchool_BamagaTrader, welcome back, top is with liquid AIO with fans exhaust, side are intake, bottom intake and rear exhaust.

@oldschool_bamagatrader9960

10 ай бұрын

thanks dude , but is not better if u make it like this ( top,bottom intake /side,back exhaust) because alwys priority is to provide intake fresh air for cpu & gpu@@KleoYan

@KleoYan

10 ай бұрын

@@oldschool_bamagatrader9960 you can give it a try but as what my experience with fish tank type of chassis, if I am to apply your suggested method, the warm air is trap within the motherboard area and it takes time to exhaust. I know you will mentioned that the rear will do the job but in reality, it does little. now this is not related to this chassis but the blueprint is of the same. kzread.info/dash/bejne/k6CuzMWxpa6Zp84.htmlsi=MqjSE0fBpQ3plUaP

hi, is this case compatible with corsair shift rm1000x power supply?

@KleoYan

11 ай бұрын

Hi Furkan Santimci, welcome to my channel, as for this, I am not able to answer you as 1) I have returned this case to Asus Singapore and 2) I do not own a Corsair Shift PSU. do pardon me, thank you!

Does the feet have rubber on the bottom to prevent scratching the table?

@KleoYan

Жыл бұрын

Hello RandomRes, welcome to my channel. Yes it does have rubber padding and it’s stick strong on the steel feet.

19:58 good review of the case! Tell me which mount for the video card, for installation in a vertical position?

@KleoYan

Жыл бұрын

Hi Danilil Samoilenko, welcome to my channel this case come with the vertical mount bracket but you will need to purchase the gpu riser cable. Watch 18:48 and 27:00

@user-jv7sp7zh8s

Жыл бұрын

@@KleoYan What length of riser cable did you use?

@KleoYan

Жыл бұрын

@@user-jv7sp7zh8s hi welcome to my channel, am using a 300mm PCIe 4 in length riser cable from Lian Li.

I put Asus Tuf Gaming RTX 4080 OC on to this case parallelly (to the floor) and I hardly closed the front glass panel of the case because of the 600W power cable of the GPU. I fear that there may be enough pressure to malfunction the power cable because of bent and burn the card :/ Is there any T-shape or 90 degree angled 600W power cable in the market? Or any other solution please? Thank you..

@KleoYan

Жыл бұрын

Hello Bora Sezgin Öztürkmen, welcome to my channel. you might want to try searching in amazon.com for those 90 degrees adaptor cable. something like this www.amazon.com/JOYJOM-12VHPWR-Adapter-Extension-Graphic/dp/B0BWDVC44J/ref=sr_1_4?keywords=12vhpwr+90+degree+adapter&qid=1686536728&sprefix=12vhpw%2Caps%2C368&sr=8-4 or even this www.amazon.com/JOYJOM-16Pin-Cable-Pcie-Extension/dp/B0BZBTYR2N/ref=sr_1_20?keywords=12vhpwr+90+degree+adapter&qid=1686536831&sprefix=12vhpw%2Caps%2C368&sr=8-20

@borasezginozturkmen6365

Жыл бұрын

@@KleoYan Thank you so much, that helps a lot :) I hope there is no side effects like graphic quality drops, etc.

@KleoYan

Жыл бұрын

@@borasezginozturkmen6365 nope. I have used them for my friends build they are all good. Just make sure the cable connectors are plug properly in.

In this case only asus Motherboards go in ?? O can i put msi ?

@KleoYan

11 ай бұрын

Hi Spartan Eu, welcome to my channel. You can fit any brand motherboard that is ATX, M-ATX or M-ITX form factor.

Can you show us how to plug in the ARGB HUB as you do?

@KleoYan

Жыл бұрын

Hi KienSeng Loo, welcome to my channel. Maybe on the next video. thanks for asking.

@user-kg5dj3ue1m

Жыл бұрын

@@KleoYan hopefully your video will show up

Amazing review! I just had 1 quick question... I know it says 360mm AIOs are supported but would a 402mm radiator fit at the top? I was going to buy the deepcool LS720 but after seeing this I'm not sure it will fit! haha

@KleoYan

Жыл бұрын

Hello Sebastian De Pua Guardiola, welcome to my channel. If you are getting the LS720. It’s of no issue to fit. You will only need to worry if it’s of Arctic Liquid Freezer II 360. By the way your 403 means? Or do you mean 420 AIO? 420 will not fit in this case.

@SebastianDPG

Жыл бұрын

@@KleoYan Thank you! Maybe I got some things mixed up while looking at the specs!

@KleoYan

Жыл бұрын

@@SebastianDPG I see. All the best with your build 😉

@KleoYan

Жыл бұрын

@@SebastianDPG I see, no worries, it's always good to ask or to seek more, so that you dont make mistakes like the sizes and such. All the best with your build. 😉

Hey mate! Nice in depth vid! I'm planning to buy this case but my only concern is how to plug the 3pin 5V cable to my old Asus TUF B450 plus gaming. The 3pin is meant for ARGB devices but my mobos header is the 4pin 12V RGB. Any ideas?

@KleoYan

2 ай бұрын

Hi Void, welcome to my channel. Your board only support RGB and not ARGB. You might want to get an ARGB controller. That’s the only way you can control the ARGB effect on the case strip.

@MickExile

2 ай бұрын

@@KleoYan Glad for the fast response! Well, with an ARGB controller i will get the front logo working but i will lose the ARGB effect. Is that right?

@KleoYan

2 ай бұрын

​@@MickExile ok my bad. infact this case does have the argb controller which you toggle the button. You do not need to connect the argb to your motherboard argb header. unless you choose to use your motherboard argb utility to control the case strip. But in your case, your motherboard can't so you can just use the case toggle switch to cycle the argb effects.

@MickExile

2 ай бұрын

@@KleoYan Oh okay! Thank you! 🙏

@KleoYan

2 ай бұрын

@@MickExile you are most welcome. one thing to take note, make sure before you purchase this case, check to see if it's argb enabled. As I do hear about others getting this case without the argb function. all the best and good luck! 😉

HI, sorry i ask u again. i just want to know if i use a hub controller for my fans on pc, where should i connect the hub cables to motherboard? I want to know which headers on mb? can u say it one by one. for example: 1- USB2 from hub to USB 2.0 header of motherboard. 2- RGB from hub to header ??? of motherboard. 3- fan power from hub to header ??? of motherboard. 4- SATA Power from hub to SATA cable of PSU. ( i don't know hub controller has sata power cable or not?) ...

@KleoYan

Жыл бұрын

Hello M, welcome back, I have no idea what and which device are you using? can you at least tell me what are the pc parts you've and the case you have? I am confuse of what you are trying to ask. does your question relates to this vase? if it is, I have explain clearly on the connectors of this case as where they should be place?

@user-fo9ce3hr5h

Жыл бұрын

@@KleoYan my case is gt502. i haven't controller hub for fans yet and i didn't buy it so far. i just want to know the connection of controller which connect to psu and motherboard. bcuz i want to buy it in future. based on videos i saw there is 3 or 4 cable for controller hub that one for usb 2 or sata, one for rgb and one for pwm (or fan). i just want to know these controller cable connect to which headers of mb and psu. thanks.

@KleoYan

Жыл бұрын

@@user-fo9ce3hr5h to use an external fan hub, it depends on which type of hub. it's either it's powered by Sata and includes argb or it is not powered nor have any argbs included. I would advise you to read the instruction manaul with your purchase the fan hub. I can't just assume and to tell you.

sir can the side pillar be removed for a seamless view?

@KleoYan

6 ай бұрын

Hi Juuzou Suzuya, welcome to my channel. Nope you can’t remove the side pillar.

@user-ru5vv5zh5u

6 ай бұрын

Thank you sir @@KleoYan

@KleoYan

6 ай бұрын

@@user-ru5vv5zh5u just call me Kleo will do and you are most welcome 😉

Thank you for the nicely detailed video, I just bought this case and this will help me a lot while building it. I have one question about the ARGB case connectors. If I don't use a hub and just plug the 5V connector to my motherboard, will it still synchronize with my ARGB fans? I have a rog strix Z790-H motherboard with 4 rgb headers.

@KleoYan

Жыл бұрын

Hi Tale Karov, welcome to my channel. You can plug the case strip argb connector to the motherboard. It will sync the argb effects from your motherboard argb utility or software. No issue.

@user-fo9ce3hr5h

Жыл бұрын

hi bro, i saw ur motherboard user manual. but there is 1 rgb header which is number 12 in that pdf. why you said u have 4 rgb header? or it's my mistake? bcuz i have z790-a wifi and it has also 1 rgb header.

@KleoYan

Жыл бұрын

@@user-fo9ce3hr5h I think you are unsure of which is to which. there are two types of RGB, first type 4pin are RGB 12volts, second type 3pin are aRGB 5volts. on the ASUS ROG B650E-F manual itself 12 is RGB 12volt rgb and 11 is aRGB, you should be using 11 and not 12. so please make sure you know which is to which.

@user-fo9ce3hr5h

Жыл бұрын

@@KleoYan sooo, i found it know. i thought those RGB pin called "Add_Gen2" (3pin) aren't rgb header that we can connect to rgb cable in pump and hub.

@KleoYan

Жыл бұрын

@@user-fo9ce3hr5h that’s argb not rgb. If your connector is 3pin means it’s argb - addressable rgb which are 5v 3pin

nice video! the best one i saw untill now. I boight this case 1 week ago, but i dont understand why the case logo doesnt work! i need of rgb controller?

@KleoYan

Жыл бұрын

Hi razorkaiser, welcome to my channel and thank you for your valuable feedback. I like to check do your case crest have a sata and argb cable? If you have, plus the sata cable to your psu sata source and the argb cable to your motherboard header, use the motherboard argb utility to control the argb effects.

@razor8200

Жыл бұрын

@@KleoYan thanks for the fast answer. I checked but I didn’t find the sata cable and the argb connector. Its really strange

@KleoYan

Жыл бұрын

@@razor8200 ok then that’s the non argb version. The one that have those cables is the argb version of this case.

i have the gt502 case but i am unable to connect the case argb cable to my motherboard because it has a male connector so can you tell how to you connect the case argb cable to motherboard??

@KleoYan

5 ай бұрын

Hi Shubham Goyal, welcome to my channel. Hmm something is not right, I recall connecting the case argb to my motherboard. You might want to check with the seller who sold you this unit.. If not, you will need to get a converter.

@shubhamgoyal5129

5 ай бұрын

Thanks For Reading My Comment @KleoYan

@KleoYan

5 ай бұрын

@@shubhamgoyal5129 you are most welcome. all the very best with your build too. 👍

Boss, what brand of argb hub you use? Thanks.

@KleoYan

Жыл бұрын

Hi Idham Kassim, welcome to my channel. you can use this. 8 Ports Fan & ARGB Hub w/Remote ============================= Amazon USA - www.amazon.com/gp/product/B08SHHXYC1/ref=ox_sc_act_image_1?smid=A187NT87WKQBIU&psc=1 Amazon UK - www.amazon.co.uk/gp/product/B08LG2G96S/ref=sw_img_1?smid=A1IT2UFMVZEG5L&psc=1 Amazon SG - www.amazon.sg/gp/product/B08KTJ9F4W/ref=sw_img_1?smid=ARPIJN329XQ0D&psc=1

@idhamkassim4195

Жыл бұрын

@@KleoYan thanks

@KleoYan

Жыл бұрын

@@idhamkassim4195 you are most welcome.

Hi Kleo, I'm waiting for my new PC. I have purchased the 360 ​​Performance (3 fans) and 7 (3+3+1) 120 TL fans. The processor will be an i5 14600KF, the graphics card is a 4070 Super and the case is the Asus TUFF gt502. What distribution would you recommend? Your opinion would help me a lot. I live in Spain with a fairly warm climate in summer and somewhat cold in winter.

@KleoYan

5 ай бұрын

Hi Salvador Alberti, welcome back. I believe I have mentioned that if you can place it this way will be great. - Top 360 AIO with fan exhuasting - Side 3 x fans intake (Bring more cool air in to cater the top section of your motherboard area) - Bottom 3 x fans intake (to cool your GPU) - Rear 1 x fan exchuast (to assist how air out as top with the 320 rad, there are restriction)

Whats the best fan intake/exhaust balance configuration for this case tho? lol It's possible to have up to 13 fans in this so I'm kinda speculating... bottom (3), side (3) and back (3) for intake, rear (1) and top (3) for exhaust? lol That would be too much positive pressure, I'm usually always for atleast 50%/50% or 60%/40% fan balance but this case can be like 80%/20% intake/exhaust balance if you know what I mean... lol I also wish the side panel atleast was like a door, I really like such designs. It'll be kinda tricky to have a full custom water cooled (gpu and cpu) system in that case without sacrificing a fan slot or two, which ruins the aesthetic imo. I give this case a 9/10. 👍

@KleoYan

Жыл бұрын

Hi fluzzles, welcome to my channel. positioning of fans is up to individual to test it. for me best configuration will be top with AIO exhaust, side intake, bottom intake, rear exhuast. In addition, I will only mount GPU vertically. It's not for looks but for thermal. as for the other side of the case. adding three more intake fans does shows improvement on motherboard and cpu temp but it add noise and it will only drop by 1 to 2 degrees by using three more additional fans which to me not very practical.

@fluzzles

Жыл бұрын

@@KleoYan I see. Thanks! :)

@KleoYan

Жыл бұрын

@@fluzzles you are most welcome.

im bit more interest in back radiator. cuz i never seen any case done this.. i wish you show it

@KleoYan

3 ай бұрын

Hi Pouring Poipoi , welcome to my channel, I wish I can show you too but I have returned this case to Asus SG.

can i use corsair rgb fans with the controller?

@KleoYan

Жыл бұрын

Hi Capturekings Slot Channel, welcome to my channel, yes you can, no issues as the power drawn is from your PSU to supply power to your fans.

@captureking

Жыл бұрын

@@KleoYan i mean the RGB

@KleoYan

Жыл бұрын

@@captureking hi, the controller you see allows both fan and argb but for argb, just make sure they are individually plug and you are good to go.

Can I horizontally mount rtx 4090 amp aero on this case with fans on side? :)

@KleoYan

Жыл бұрын

Hi kenshin humura, welcome to my channel, if you are using the default vertical mount bracket of this case. you are able to fit the Giga 4090 Aero GPU, not an issue.

@kevin26exe

Жыл бұрын

@@KleoYan hi kleo thank you very much for the response. What I meant is to mount the gpu normally (without using riser). Will I have issue if I have fans on the side? :)

@KleoYan

Жыл бұрын

@@kevin26exe oh ok my bad and you mean the Zotac 4090 amp airo right. The dimension of this card is 355.5mm x 149.6mm x 72.1mm. Which the width is similar to the Auros Master shown in this video. I don’t think is a good idea to fit horizontal. Vertically will be of a better choice.

@kevin26exe

Жыл бұрын

@@KleoYan thank you :)

@KleoYan

Жыл бұрын

@@kevin26exe most welcome and all the best with your build. Do share your results if you have done it. Am curious to know too. Thank you.

13 fan option for a case is overkill...and pressure isnt balanced.....

@KleoYan

Жыл бұрын

Hello Tahzib Hassaini, welcome to my channel, you mean too much intake or exhaust?

@tahzib1451

Жыл бұрын

@@KleoYan both....because there r odd number of fans, it will be either negative pressure or positive pressure buildup inside the case....there's this guy Mr. Matt Lee (i think) who used only 8 fans - top 360 aio, side 120mm, bottom 3x120mm, and rear 120mm...and he showed airflow with smoke and there was no smoke left inside showing balanced pressure...which wont happen otherwise

@KleoYan

Жыл бұрын

@@tahzib1451 I see. Thanks for the info.

no thx... i love my gt501. it is bigggger

@KleoYan

Жыл бұрын

Hi mno MN, welcome to my channel and thank you for your feedback.

@mnoomle8645

Жыл бұрын

@@KleoYan great and detailed video...

@KleoYan

Жыл бұрын

@@mnoomle8645 thank you 😊

when the gpu starts to get longer and bigger and then sag you know the gpu manufacturers have not innovate anything

@KleoYan

Жыл бұрын

Hi Noneofyour Business, welcome to my channel. It’s partially correct. There are some case manufacturer does have a support bracket and some gpu or motherboard manufacturers do have GPU support brackets too.

@NoneofyourBusiness-gy9yw

Жыл бұрын

@@KleoYan yea gpu has been sagging since strix 1070 but they keep making it bigger 🤦‍♂️. no way to make this build look nice with AIO. i was thinking distro plate build but then again i dont want to tear off my gpu heatsink and finally i decided air cooling is still the best for me. 😂. i wish they could have made the back exhaust fan 140mm compatible.

@KleoYan

Жыл бұрын

@@NoneofyourBusiness-gy9yw I see, to be honest, most of my build are vertically mounted and I have a physical sponge to prevent the card front sagging.

@NoneofyourBusiness-gy9yw

Жыл бұрын

@@KleoYan yea but even when its vertical its sagging without the gpu stand or bracket its just crazy. so vertical and horizontal comparison which has better temps ?

@KleoYan

Жыл бұрын

@@NoneofyourBusiness-gy9yw hi, this is based on the RTX3000 series GPUs, vertical mount will gain more benefits compared to horizontal, I have yet to test on 4000 series as these card runs cooler. nevertherless for the RTX3000 series, here is a video of what I have tested so far. kzread.info/dash/bejne/Y4eEy9F_Z5vej6g.html

this is by far the best review of this case! 🫡👊

@KleoYan

6 ай бұрын

Hi Zen Motion Sim, welcome to my channel and I am glad you like my content. Thank you for your valuable feedback and all the best with your build too 😉