Here after sriman ! This was automatically shown in myfeed

@TARUNJAYA03

3 жыл бұрын

Yeh for me also

@PhaneeshwarVemula

3 жыл бұрын

For me also 😂

@RahulRouthu

3 жыл бұрын

Yes

@le-115nikhil6

3 жыл бұрын

For me❤️

@drivewithabdullah

3 жыл бұрын

Yup !

Sriman Kotaru🌝❤️

@yathishpgowda4056

3 жыл бұрын

Yup recommend after watching the vlog

@venugunda4278

3 жыл бұрын

Yes recomend after watching the vlog 🔥🔥

Success at the first attempt! Many thanks for providing such a clear, systematic solution to what might have been an awkward problem.

@bmw-motorrad-bohling

5 жыл бұрын

Hi Graham, thanks for your great feedback!

Thank you for the very fast delivery of my panniers (R1250RS) from Germany to France, and thank you also for this great little video that you gave the link for on the slip with the panniers. I am sure that I will be dealing with you again.

following this video i got it right in 1 attempt. i have come back to this video several times to key different cases for bmw bikes i have had. thanks and awesome representation!

I want to tell you how grateful I am for his video. I used your incredibly helpful video to fix this issue on my BMW GS today. Even with my very fat, uncoordinated fingers, it took me only 8 minutes to watch your 6-minute video and another couple minutes to fix the tumbler. Huge thanks!

Used this video about three years ago and again just now to set locks of retained panniers to new bike key. Easy to follow, second pannier and top box took a lot less time once I was back up to speed. There's a good video on here on how to remove the locking catch assembly section from the box itself if required but in reality, just remove the three cross head screws and withdraw the assembly. I found taking a few photo's helped me put the yellow locking cam back in correctly.

Sriman anna because of you this video getting views and 👍likes

I would have spend way to much time, lost too many pins and springs in desperation if it hadn’t been for this video! Thank you!

Sriman anna chusad nak vasthunde feed la😂

Thank you for your video. Very clear, simple and helpful!

Good video,had six locks to do,took a bit of time for the first lock and then rattled them off with my sequence 👍 Thanks for making the video 😃happy

Thanks this video was super helpful. I got my cylinder keyed very quickly

thank you mate. sorted in 5min.

Great video. Just make sure that the plates are completely flush both sides of the barrel. Blades can appear 'flush' on the entry side of the chamber but can protrude out the other side. There must be no blade visible on either side of the barrel when the key is inserted. Follow that and you will know everything is good!

Brilliant, very easy to follow, works a treat.

@bmw-motorrad-bohling

7 жыл бұрын

Thank you!

Thanks, it was very helpful for me to set the lock cylinder for my top case.

Excellent, concise, clear. Many thanks.

Thank you, I was able to code my lock with the help of this tutorial

Thanks for the video, very easy to follow.

I watched a number of other videos. Some were reasonable. This video is very well done. The thing I used most was the diagram with the letters. That told it all.. Really appreciate your time to make this video. Thanks from Brisbane Australia.

@bmw-motorrad-bohling

5 жыл бұрын

Hi Dennis, thanks for your great feedback! Best greetings to Brisbane!

Note: the wafers are not random , the higher the number, the deeper in the lock cylinder they will sit. If the 1 wafer is up high, just jump ahead to a 3 and you should be flush. Also if you apply light grease to the lock cylinder before starting, you won't lose your Springs or wafers as you work on it. The lock should be lubed before installing anyway.

@davidwill7248

Жыл бұрын

should we use a dry lube spray or waterproof grease?

@classiccycleconnection9334

Жыл бұрын

@@davidwill7248 when you remove a lock cylinder from factory luggage the wafers have a type of grease both lubing the lock and retaining the springs and wafers in the lock . Any type of grease will extend the life of the lock cylinder and the luggage .

Thank you very much. The video really helped. I was able to set up the locks and it is working fine. Thank you again. Super.

crystall clear.....thanks for sharing!!!

Very helpful, thank you for making this video.

Great video, clear and concise. Many thanks......

Thank you! You saved me a lot of money.

Thanks for the tip and good music!!!

Much appreciated! Nice soundtrack too - let me know where it comes from.

Yesterday sriman kotaru made a vlog regarding his bike key assembling Now you tube recommend me this🙄🙄

Perfect. Worked a charm

Nagyon hasznos videó! Köszönöm.

I found that I had too many "1" so I had to leave one of those out on each barrel to make it work , thanks for the video as the instructions were a bit hard to follow , cheers Michael .

Who's here after Sriman 😂😂😂

clearly and simple explanation, thanks a lot

Easy peasy, thanks!

Thank you for the tip ! 👍🏻

TYVM this helped a lot!

@bmw-motorrad-bohling

7 жыл бұрын

Thats great!

Thanks a million 👍🏼

Thanks this really helped

@bmw-motorrad-bohling

7 жыл бұрын

Thanks for your feedback!

Who does the music? Very cool and a great choice for the video

Thank you so much!

Thank you!

great video

Sriman kotaru ❤️❤️❤️❤️

very nice !

Great tutorial, thanks! Now how about a short on how to fit the cylinder on the vario case.

@joem5639

5 жыл бұрын

Remus Avram If you examine the hole for the cylinder you will see 4 areas of lows (12, 3, 6 & 9 o’clock position) bordered by high areas. The high area around the 2 o’clock position has a ramp to depress the locking pin in the cylinder. Insert the cylinder with the locking pin pointing at the 2 o’clock position and twist it to the 12 o’clock position as you insert it and you’re done.

@geckokeller

4 жыл бұрын

Awesome video!! Thank you!! Super simple!!

thank you very very much!

Does anyone know if this process can be followed when coding the key barrel that supplies the Navi holder as well? Mine didn't come with a Navi holder, so I purchased a second hand, with the barrel in. I hope I can make it work. Do you know if I can use it with the barrel off??

Sriman kotaru

nice and easy!

@bmw-motorrad-bohling

7 жыл бұрын

Wonderful!

Hi! I just bought a 2014 R1200RT and I'd like to add a top case and code my key into the lock. Can you help with 2 concerns I have, please? 1. The spare key that I have has a code attached with it. Could that help when coding a new cylinder? 2. Do you have any tips where to buy a new cylinder that may be coded? All I find is $65+ prices. Thanks!

useful, thanks

The tabs on the edge of the numbered pieces go flat side down, towards the springs, bevel out.

@bmw-motorrad-bohling

5 жыл бұрын

Hi John, thanks for your opinion. Helps us to improve our future videos!

Hi do you have a link where i can buy this part from, im in UK thank you

Thanks

Do we know "why" there is a slot E if it is always supposed to be left empty? It seems like something that could easily get us into trouble unnecessarily.

parfait!, sans quoi ce serait un casse-tête 🤔

where do i buy the lock plates? and or replacement springs? thanks

@classiccycleconnection9334

5 жыл бұрын

They are not avail separately but many dealers keep a lock kit somewhere in the store for re-keying locks with extra wafers and springs. Extra lock wafers are extremely rare though. If you are saying that not all the slots are filled in your cylinder, you have no worry. Even 2-3 wafers is all you need to have a secure lock. Be sure you remove the Springs from any unused slots to prevent them from jamming the lock.

Hi I do I remove the original barrel?

After sriman KZread recommended video

Sir koi video ford endeavour lost key kese hoti he vo bnao Or copy kese hoti he please sir

How to extract the small plates from the cylinder?

@classiccycleconnection9334

5 жыл бұрын

If the wafers are "locked in" then the cylinder is one from a saddlebag included with a motorcycle that came equipped with bags such as a RT . OR the dealer ordered the lock cylinder for a topcase from BMW by VIN. then the cylinder comes pre-coded to the bike and the wafers are pinned in . Most dealers keep the cylinder kits in stock to key a topcase to a bike when it is sold rather than making a customer wait the days for the VIN specific lock cylinder. I say most.

My stop plate isn't stiff to push in like you are showing on this video? in fact there is nothing holding it in place at all!!

@classiccycleconnection9334

5 жыл бұрын

You clearly have an older model lock cylinder. No worries , just apply some light grease to the cylinder and the locking wafer and the others will stay in place. They didn't have the "stepped" lock wafer until perhaps 2014-2015.

After watching srimankotaru's video KZread suggested me

I am curious to know why slot E or the 7th slot is left empty? Why is that slot there if it is not used?

@bmw-motorrad-bohling

7 жыл бұрын

Good question :-) Probably this slot is a standard lock cylinder configuration and is always produced like this. Maybe to fit to other motorbikes. We do not know it exactly. Is only a guess... But you are right, without this slot it would be a little easier.

@HorizonsUnlimited

7 жыл бұрын

I found out why. According to someone else, it is used when the lock cylinder is used as the ignition lock cylinder.

@HorizonsUnlimited

7 жыл бұрын

Also if the 7th tumbler is left installed in slot "E" as you describe it, the lock cylinder can be installed, the lock can be locked and unlocked, but you cannot remove the key.

@bmw-motorrad-bohling

7 жыл бұрын

Thanks for the information :-)

@bmw-motorrad-bohling

7 жыл бұрын

Thats exactly the problem concerning slot "E" and the reason why you have to leave it empty.

👍

@Sriman Kotaru

very unfocus